1 Touch screen

1 2 Patient
3 Probe
4 Review
5 Report
6 End Exam
2 3 4 12 7 Body Mark
8 Cine
5 6
9 Arrow
13
7 10 Clear
8 9
11 Comment
19
10 11
12 iStation
15 18
14 16
17 20
13 Image Mode & B/2D Mode
14 Measure
15 Update
16 Save1
17 Zoom
18 Multi-functional knob
19 iTouch

DC-7
20 Depth

Quick Reference Guide

 Quick Reference Guide DC-7
Getting Started The parameters in Color mode: WF, Packet Size, Persistence, B/C Wide, Priority, Line
Density, Dual Live, Flow State, Invert, Frequency, Scale, Baseline, Map, Steer, Color IP, B
New Patient
Display, Acoustic Power, Smooth, Focus Position (the parameters might be displayed
1. Press [Patient], fill in the basic patient information via Touch screen or keyboard.
on different pages).
2. Press [Probe], select probe and exam mode via Touch screen.
Special Imaging Mode (Optional)
Scanning 3D/4D
1. Press [Probe], select the volume probe and the exam mode via Touch screen.
B Mode
2. Click [3D/4D] via Touch screen to enter and adjust the ROI and curve VOI.
1. Adjust the interested parameters via Touch screen.
3. Click [Start] or press [Update] to enter the 4D image real-time status.
2. Rotate the [B] knob to adjust the gain.
CDFI/Power Mode Measurement
1. Press [Color] to enter Color mode.
1. Press [Freeze] to freeze the image before the measurement.
2. Move [Trackball] to change the position of ROI.
2. Press [Measure] to enter the application measurement status.
3. Press [Set], and then move [Trackball] to change the size of ROI, press [Set].
3. Move the cursor or use Touch screen to choose the measurement tool, and then
PW/CW Mode go to the desired position to measure.
1. Press [PW] to enter PW mode.
2. Move [Trackball] to change the position of sample volume. Post Scanning
3. Change the size and angle of sample volume via Touch screen or its relative knob. Comments and Body Marks
Press [Update] or [PW] to get the Pulse Wave Doppler. Comment
Image Adjustment 1. Press [Comment] to change the comment setting position and add the comment
to the image.
1 Body Mark
1. Press [Body Mark] and choose the desired one via Touch screen.
2. Move [Trackball] to place the probe marker and rotate the [Multi-functional Knob]
to adjust the orientation of the probe.
Save Images or Cine
2 1. Press [Save1] or [Save2] to save a single-frame image or cine to the system.
Report and Print
1. Press [Report], move the cursor to the comment text box and type the text.
2. Press [Report] and click [Image Select] to add images, and then click [Print View] to
preview, click [Print] to print.

3 End Exam
Press [End Exam] to end one examination. You may start a new exam by repeating
the instructions above.
1. Mode displaying areas: Click to display the active imaging mode.
2. Parameter adjusting areas: Display the parameters in the current imaging mode.
3. Knob adjusting areas: Display the knob controlled parameters that can be
Image Management
adjusted by the knobs under the Touch screen. Image Transfer
The parameters in B mode: iClear, Dynamic Range, IP, L/R Flip, iBeam, Noise Reject, 1. Press [iStation] to enter image management and select the image to send to USB
Quad Mode, THI, Focus Number, Colorize, FOV, Frequency, Focus Position, Colorize or DICOM, etc.
P/N: 046-003454-00 Rev A

Map, Gray Map, B Steer, Acoustic Power, Tissue Specific Imaging, Trapezoid, U/D Flip, 2. Or, Press [Review] and select the image to send to USB, DICOM, etc.
Persistence, Smooth, Image Merge, Rotation and Line Density (the parameters might
be displayed on different pages). Note: For detailed information, please refer to the operation manual.

Mindray DS USA, Inc. 800 MacArthur Blvd., Mahwah, NJ 07430 Tel: 1.800.288.2121 or 201.995.8000 www.na.mindray.com