Scribd
Upload
120 views

Ultipleat Filters

Uploaded by

alphite
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
120 views

Ultipleat Filters

Uploaded by

alphite
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ultrapure Water Filtration Filters Data Sheet E31a

Ultipleat Profile® Filter

Description Specifications
The Ultipleat Profile filter combines Materials Operating Characteristics
the unique medium of Profile II depth • Medium: Polypropylene • Maximum Differential Pressure:
filters with a crescent shaped pleat • Core, cage, end caps: Polypropylene 60 psid @ 86°F / 4.1 bar @ 30°C;
design. The result is a resin trap, pre-RO • Gasket: Polyethylene 50 psid @ 122°F / 3.4 bar @ 50°C;
or cooling water filter with superior flow • O-ring: Silicone 30 psid @ 158°F / 2 bar @ 70°C;
vs. differential pressure capabilities. 15 psid @ 176°F / 1 bar @ 80°C
Removal Ratings
• All polypropylene construction • 3.2 µm, 4.5 µm, 6 µm, 10 µm, 20 µm,
• High particle removal efficiency 30 µm, 40 µm, 50 µm, 70 µm, 100 µm
• Long service life
• Fixed pore structure Configurations
• Low extractables • PFY style filter available as a
• No surfactants or binder resins used 10" / 254 mm, 20" / 508 mm,
during manufacture 30" / 762 mm, or 40" / 1016 mm
• Available in many removal ratings long filter cartridge
• Available in an RF configuration so • Diameter: 21⁄2" / 64 mm
the cartridge may fit into a housing • Double open end, flat gasket welded
designed to hold either a 21⁄2" or 23⁄4" to each end
O.D. filter • AB style Code 3, 7 and 8 available
• Very low clean pressure drop as 10" / 254 mm, 20" / 508 mm,
30" / 762 mm, or 40" / 1016 mm
long filters
Removal Rating/Pressure Drop

Cartridge Grade Removal Rating in Microns (µm) Clean Pressure Drop in Water Per 10" / 254 mm Element
at % Efficiency1
90% 99.98% psi / gpm mbar / L / min

UY020 <1 3.2 1.3 237


UY045 1.2 4.5 0.085 15.5
UY060 2.5 6 0.035 6.4
UY100 4.3 10 0.030 5.5
UY200 10.5 20 0.025 4.6
UY300 16.5 30 0.020 3.6
UY400 19 40 0.015 2.7
UY500 25 50 ≤ 0.010 ≤ 1.8
UY700 35 —
2 ≤ 0.010 ≤ 1.8
UY1000 60 —
2 ≤ 0.010 ≤ 1.8

Part Numbers / Ordering Information

Part Removal Nominal Configuration3 O-Ring/Gasket


Number Rating (µm) Length3 Code Material3
(in / mm)

AB1UY0203H4 3.2 10 / 254 3 Silicone


PFY1UY020J 3.2 10 / 254 Double Open End / Flat Gasket EPR
AB1UY0453H4 4.5 10 / 254 3 Silicone
PFY1UY045J 4.5 10 / 254 Double Open End / Flat Gasket EPR
AB1UY0603H4 6 10 / 254 3 Silicone
PFY1UY060J 6 10 / 254 Double Open End / Flat Gasket EPR
AB1UY1003H4 10 10 / 254 3 Silicone
PFY1UY100J 10 10 / 254 Double Open End / Flat Gasket EPR
AB1UY2003H4 20 10 / 254 3 Silicone
AB1UY4003H4 40 10 / 254 3 Silicone
PFY1UY400J 40 10 / 254 Double Open End / Flat Gasket EPR
AB1UY10003H4 100 10 / 254 3 Silicone
1 Rating of filter is based upon the modified Oklahoma State University
(OSU) F-2 Filter Performance (Beta Rating) Test.
2 Precision evaluation of the 99.98% removal efficiency for these coarse
grades is not possible with the OSU test procedure utilized.
3 Other lengths, configurations and gasket materials are available.

Unit conversion: 1 bar = 100 kilopascals

2200 Northern Boulevard Visit us on the Web at www.pall.com/micro


East Hills, New York 11548-1289 USA Pall Corporation has offices and plants throughout the world in locations including:
Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, Hong Kong,
1.800.360.7255 toll free (Only in US) India, Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand,
Norway, Poland, Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden, Switzerland,
1.516.484.5400 phone Taiwan, Thailand, United Kingdom, United States, and Venezuela. Distributors are located in
1.516.625.3610 fax all major industrial areas of the world.

© Copyright 2004, Pall Corporation. Pall, are trademarks of Pall Corporation. ® Indicates a Pall trademark
registered in the USA. is a service mark of Pall Corporation.

E31a

You might also like