Scribd
Upload
48 views

Assignment BEE Div F

This document contains 4 assignments with electrical engineering problems involving concepts like superposition theorem, Norton's theorem, Thevenin's theorem, AC circuits, inductors, capacitors, power factor, 3-phase circuits and more. It asks the reader to calculate values like current, resistance, inductance, capacitance, power drawn, reactive power and total power for various circuit configurations connected to AC power supplies. The reader is expected to use circuit analysis methods and theorems to solve 13 multi-part questions in total.

Uploaded by

Ruchit Pathak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Assignment BEE Div F

This document contains 4 assignments with electrical engineering problems involving concepts like superposition theorem, Norton's theorem, Thevenin's theorem, AC circuits, inductors, capacitors, power factor, 3-phase circuits and more. It asks the reader to calculate values like current, resistance, inductance, capacitance, power drawn, reactive power and total power for various circuit configurations connected to AC power supplies. The reader is expected to use circuit analysis methods and theorems to solve 13 multi-part questions in total.

Uploaded by

Ruchit Pathak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Assignment 1:

Q1: Find the value of current flowing in 4 Ω resistance using Superposition theorem
Q2: Find the value of current flowing in 4 Ω resistance using Nortons theorem
Q3: Find the value of current flowing in 4 Ω resistance using Thevenins theorem
Assignment 2:
Q1: An alternating current varying sinusoidally at 50 Hz has its rms value of 10 A. Write down
an equation for the instantaneous value of the current. Find the value of the current at (i) 0.0025
second after passing through the positive maximum value, and (ii) 0.0075 second after passing
through zero value and increasing negatively.
Q2: Find the rms value of the waveform shown

Q3: A choke coil is connected in series with a fixed resistor. A 240 V, 50 Hz supply is applied
and a current of 2.5 A flows. If the voltage drops across the coil and fixed resistor are 140 V
and 160 V respectively, calculate the value of the fixed resistance, the resistance and inductance
of the coil, and power drawn by the coil.
Assignment 3:
Q1: A resistor and a capacitor are connected in series with a variable inductor. When the circuit
is connected to a 230 V, 50 Hz supply, the maximum current obtained by varying the
inductance is 2 A. The voltage across the capacitor is 500 V. Calculate the resistance,
inductance and capacitance of the circuit.
Q2: A series circuit consisting of a 12 W resistor, 0.3 H inductor and a variable capacitor is
connected across a 100 V, 50 Hz ac supply. The capacitance value is adjusted to obtain
maximum current. Find, the capacitance value and the power drawn by the circuit under the
condition. Now, the supply frequency is raised to 60 Hz, the voltage remaining same at 100 V.
Find the value of the capacitance C1 to be connected across the above series circuit so that
current drawn from the supply is minimum
Assignment 4:

Q1: Three coils, each having a resistance and an inductance of 8 W and 0.02 H respectively,
are connected in star across a three-phase, 230 V, 50 Hz supply. Find the (i) power factor, (ii)
line current, (iii) power, (iv) reactive volt-amperes, and (v) total volt-amperes
Q2: Find the values of circuit elements and reactive volt-ampere drawn for a balanced 3-phase
load connected in delta and drawing a power of 12 kW at 440 V. The power factor is 0.7 leading

You might also like