Scribd
Upload
165 views1 page

22 - Sikla Beam Clamp TCS

This document provides information about Beam Clamp TCS devices for fixing pipes, ducts, and equipment to steel beams. It describes the applications and components of the clamps and provides instructions for installation and technical specifications. The clamps are suitable for mounting to various steel beam types and sizes and can support working loads ranging from 3.5 to 8.5 kN depending on the model. They are made of cast iron and steel and are approved for use in stationary fire extinguishing systems.

Uploaded by

Bahiya Al-rifaii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
165 views1 page

22 - Sikla Beam Clamp TCS

This document provides information about Beam Clamp TCS devices for fixing pipes, ducts, and equipment to steel beams. It describes the applications and components of the clamps and provides instructions for installation and technical specifications. The clamps are suitable for mounting to various steel beam types and sizes and can support working loads ranging from 3.5 to 8.5 kN depending on the model. They are made of cast iron and steel and are approved for use in stationary fire extinguishing systems.

Uploaded by

Bahiya Al-rifaii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Fixing to Steelwork & Decking

9Fixing to Steelwork & Decking


Beam Clamp TCS
Group: 1337

Application
Heavy-duty connection element which, in combination with grub screws (M8 up
to M16), are suitable for mounting pipes, ducts and equipments to steel beams
(I-, T-, U-and angle steel beams).
 The combination with a Universal Joint provides for vertically aligned
attachment to inclined beams.
 Can serve as single mounting element for installing crossbars and for fixing
cantilever structures.
 Due to their special base profile, Beam Clamps TCS 1 can also be slid along
and retained in the opening of Sikla Channels of the 41 series.

Scope of delivery
Pre-assembled with clamping bolt and locking nut.

Installation
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down
with a spanner according to the mounting structures. The hardened point of the
clamping bolt will penetrate the comparatively soft material of the beam,
ensuring a solid and highly secure connection. Tighten the locking nut for
securing the installation.
For installation near a cutting edge of a channel, an additional Holding Bracket
HK 41 has to be mounted.
Note: Respect relevant mounting instructions!
For FM-construction use thread ≥ M10 only!

Group TCS 0 Technical Data


The nominal loads indicated apply to new Beam Clamps fixed to undamaged
beam flanges only.

Working load: Type TCS 0: 3.5 kN


Type TCS 1: 5.0 kN
Type TCS 2: 8.5 kN
Material: Body in cast-iron, electro-galvanised and clamping bolts in
steel, class 8.8., electro-galvanised

Approvals / Compliance
Approved and accepted by VdS and FM for use with stationary fire
extinguishing systems.
TCS O LC Approval: G4950065 and G4950066 (erected mounting with M10 up
to a maximum height hmax = 150 mm and up DN 50 only). For further types and
different application fields: G4820023; G4830054; G4800039/ ...45; G4990027.
Group TCS 1
Type Connection Clamping range on W Quantity Part
[fore/aft] parallel flange [kg] [pack] number
[mm]
TCS 0 LC Ø 10.5 18 0.10 50 156648
TCS 0 M8/M8 M8/ M8 22 0.14 50 178283
TCS 0 M8/M10 M8/M10 22 0.14 50 174206
TCS 1 M10/M8 M10/M 8 26 0.21 50 116770
TCS 1 M10/M10 M10/M10 26 0.21 50 116150
TCS 1 M10/M12 M10/M12 26 0.22 50 167332
TCS 2 M12/M12 M12/M12 26 0.28 25 174224
TCS 2 M12/M16 M12/M16 26 0.27 25 174215

Group TCS 2
08/2020

Siconnect 9-1

You might also like