Scribd
Upload
76 views2 pages

ETABS 19.1.0-Design Details4

The document summarizes the results of an AISC 360-16 steel section check for an ordinary moment frame element (VIGA 200X200X6 section) at level Nv+10.52. It provides the load combinations and demands, section properties, material properties, design parameters, and checks that all demand to capacity ratios are below the limit of 0.95.

Uploaded by

Alejandro Tovar Molina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views2 pages

ETABS 19.1.0-Design Details4

The document summarizes the results of an AISC 360-16 steel section check for an ordinary moment frame element (VIGA 200X200X6 section) at level Nv+10.52. It provides the load combinations and demands, section properties, material properties, design parameters, and checks that all demand to capacity ratios are below the limit of 0.95.

Uploaded by

Alejandro Tovar Molina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ETABS 19.1.

0 License #*1FQ656WWN5A8XFF

ETABS Steel Frame Design


AISC 360-16 Steel Section Check (Strength Summary)

Element Details

Level Element Unique Name Location (mm) Combo Element Type Section Classification
Nv +10.52 B75 59 97.6 1.2D+1.6L Ordinary Moment Frame VIGA 200X200X6 Non-Compact

LLRF and Demand/Capacity Ratio

L (mm) LLRF Stress Ratio Limit


7274.1 1 0.95

Analysis and Design Parameters

Provision Analysis 2nd Order Reduction


LRFD Direct Analysis General 2nd Order Tau-b Fixed

Stiffness Reduction Factors

αP r /P y αP r /P e τb EA factor EI factor
0.005 0.003 1 0.8 0.8

Design Code Parameters

Φb Φc Φ TY Φ TF ΦV Φ V-RI Φ VT
0.9 0.9 0.9 0.75 0.9 1 1

Section Properties

A (mm²) J (mm⁴) I 33 (mm⁴) I 22 (mm⁴) A v3 (mm²) A v2 (mm²)


4633.6 43808304 29014998.2 29014998.2 2256 2256

Design Properties

S 33 (mm³) S 22 (mm³) Z 33 (mm³) Z 22 (mm³) r 33 (mm) r 22 (mm) C w (mm⁶)


290150 290150 336622.2 336622.2 79.1 79.1

Section Properties --- Unsymmetric Sections

I xy (mm⁴) I max (mm⁴) I min (mm⁴) S max (mm³) S min (mm³) r max (mm) r min (mm) α (deg)
0 29014998.2 29014998.2 290150 290150 79.1 79.1 90

Material Properties

E (tonf/m²) f y (tonf/m²) Ry C pr α
20389019 25310.5065 1.5 1.4 90

HSS Section Parameters

HSS Welding Reduce HSS Thickness?


ERW No

TESIS.EDB Page 1 of 2 25/6/2021


ETABS 19.1.0 License #*1FQ656WWN5A8XFF

Stress Check forces and Moments

Location (mm) P u (tonf) M u33 (tonf-m) M u22 (tonf-m) V u2 (tonf) V u3 (tonf) T u (tonf-m)
97.6 -0.5559 -0.38 -4.832E-03 -0.2201 -0.0079 -2.185E-03

Axial Force & Biaxial Moment Design Factors (H1-1b)

L Factor K1 K2 B1 B2 Cm
Major Bending 0.814 1 1 1 1 1
Minor Bending 0.241 1 1 1 1 1

Parameters for Lateral Torsion Buckling

L ltb K ltb Cb
0.241 1 1.192

Demand/Capacity (D/C) Ratio Eqn.(H1-1b)

D/C Ratio = (P r /2P c ) + (M r33 /M c33 ) + (M r22 /M c22 )


0.054 = 0.004 + 0.049 + 0.001

Axial Force and Capacities

P u Force (tonf) ϕP nc Capacity (tonf) ϕP nt Capacity (tonf)


0.5559 78.6234 105.5519

Moments and Capacities

M u Moment (tonf-m) ϕM n (tonf-m) ϕM n No LTB (tonf-m) ϕM n Cb=1 (tonf-m)


Major Bending 0.38 7.67 7.67 7.67
Minor Bending 4.832E-03 7.67

Torsion Moment and Capacities

T u Moment (tonf-m) T n Capacity (tonf-m) ϕT n Capacity (tonf-m)


-2.185E-03 6.85 6.16

Shear Design

V u Force (tonf) ϕV n Capacity (tonf) Stress Ratio


Major Shear 0.2201 30.8343 0.007
Minor Shear 0.0079 30.8343 2.563E-04

TESIS.EDB Page 2 of 2 25/6/2021

You might also like