Scribd
Upload
78 views

Competency Based Learning Materials: Electrical and Installation Maintenance NC Ii

This document provides competency-based learning materials for installing wiring devices of floor and wall mounted outlets, lighting fixtures/switches, and auxiliary outlets. The materials are for the unit of competency "Install Wiring Devices of Floor and Wall Mounted Outlets, Lighting Fixtures/Switches, and Auxiliary Outlets" which is part of the Electrical and Installation Maintenance NC II qualification. The document guides learners through learning activities, information sheets, self-checks, task sheets, and job sheets to complete the module in a self-paced manner with minimal instructor assistance. It also provides information on recognition of prior learning to assess existing skills and knowledge.

Uploaded by

elmer olmedillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
78 views

Competency Based Learning Materials: Electrical and Installation Maintenance NC Ii

This document provides competency-based learning materials for installing wiring devices of floor and wall mounted outlets, lighting fixtures/switches, and auxiliary outlets. The materials are for the unit of competency "Install Wiring Devices of Floor and Wall Mounted Outlets, Lighting Fixtures/Switches, and Auxiliary Outlets" which is part of the Electrical and Installation Maintenance NC II qualification. The document guides learners through learning activities, information sheets, self-checks, task sheets, and job sheets to complete the module in a self-paced manner with minimal instructor assistance. It also provides information on recognition of prior learning to assess existing skills and knowledge.

Uploaded by

elmer olmedillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Competency Based Learning Materials

Sector: ELECTRICAL & ELECTRONICS SECTOR

Qualification Title:
ELECTRICAL AND INSTALLATION MAINTENANCE NC II
Unit of Competency:
Install Wiring Devices of Floor and Wall Mounted Outlets,
Lighting Fixtures/Switches, and Auxiliary Outlets
Module Title:
Installing Wiring Devices of Floor and Wall Mounted Outlets,
Lighting Fixtures/Switches, and Auxiliary Outlets
UNIVERSITY OF SCIENCE AND TECHNOLOGY
COLLEGE OF SCIENCE AND TECHNOLOGY EDUCATION

Cagayan de Oro Campus, Lapasan, CDO City


ELECTRICAL AND INSTALLATION
MAINTENANCE NC II
HOW TO USE THIS COMPETENCY BASED LEARNING
MATERIALS
Welcome to the module in “Installing Wiring Devices of Floor and
Wall Mounted Outlets, Lighting Fixtures/Switches, and Auxiliary
Outlets”. This module contains training materials and activities for you to
complete.
The unit of competency “Install Wiring Devices of Floor and Wall
Mounted Outlets, Lighting Fixtures/Switches, and Auxiliary Outlets”
contains knowledge, skills and attitudes required for Electrical and
Installation MaintenanceNC II.
You are required to go through a series of learning activities in order
to complete each learning outcome of the module. In each learning outcome
there are Information Sheets, Self-Checks, Task Sheet and Job Sheets.
Follow these activities on your own. If you have questions, don’t hesitate to
ask your facilitator for assistance.
Recognition of Prior Learning (RPL)

You may already have some or most of the knowledge and skills covered
in this learner’s guide because you have:
□ been working for some time
□ already completed training in this area.
If you can demonstrate to your trainer that you are competent in a
particular skill or skills, talk him/her about having them formally
recognized so you don’t have to do the same training again. If you have a
qualification certificate or Certificate of Competency from previous trainings,
show it to your trainer. If the skills you are acquired are still current and
relevant to the unit/s of competency they may become part of the evidence
you can present for RPL. If you are not sure about the currency of your
skills discuss this with your trainer.
This module was prepared to help you achieve the required
competency, in Electrical Installation and Maintenance NC II. This will
be the source of information for to acquire knowledge and skills in this
particular trade independently and at your own pace, with minimum
supervision or help from your instructor.
Remember to:

□ Talk to your trainer and agree on how you will both organize the Training
of this unit. Read through the modules carefully. It is divided into sections,
which cover all kind the skills and knowledge you need to successfully
complete this module

Electrical Installation and Date Developed: CBLM 1


Maintenance NCII September 2017 Issued by:
Page 2 of
Install Wiring Devices of Floor and Wall Developed by: USTP-CSTE 115
Mounted Outlets, Lighting
Victor S. Rosales
Fixtures/Switches, and Auxiliary Revision # 02
Outlets Maniya B. Arong
Thank you for using www.freepdfconvert.com service!

Only two pages are converted. Please Sign Up to convert all pages.

https://www.freepdfconvert.com/membership

You might also like