Scribd
Upload
135 views3 pages

Client:: Calculation No: Stress Report No: Rev. Date: SHT: XX-PI-SLUG-000X XX-XXX-XX-XXXX A1 XX/XX/XXXX 1 of 3

This document contains a slug force calculation for Project X. It includes the calculation sheet contents, lists the parameters used in the calculation such as pipe dimensions and fluid properties, and shows the calculated slug loads at a bend and tee of 119.02 kgf and 168 kgf, respectively. The parameters and calculations are presented over three pages to determine the slug forces on the piping system from the flowing fluid.

Uploaded by

K. Paul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
135 views3 pages

Client:: Calculation No: Stress Report No: Rev. Date: SHT: XX-PI-SLUG-000X XX-XXX-XX-XXXX A1 XX/XX/XXXX 1 of 3

This document contains a slug force calculation for Project X. It includes the calculation sheet contents, lists the parameters used in the calculation such as pipe dimensions and fluid properties, and shows the calculated slug loads at a bend and tee of 119.02 kgf and 168 kgf, respectively. The parameters and calculations are presented over three pages to determine the slug forces on the piping system from the flowing fluid.

Uploaded by

K. Paul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Calculation No: Stress Report No: Rev.

Date: Sht:
XX-PI-SLUG-000X XX-XXX-XX-XXXX A1 XX/XX/XXXX 1 of 3

Client:

Client Project No.

Project Title :

Project X

Slug Force Calculation

A1 Initial Issue XX XX/XX/XX XX XX/XX/XX XX XX/XX/XX


Rev Details Created by Date Chk'd by Date App'd by Date
Made by Date Checked by Date Approved by Date
* Name * XX/XX/XX * Name * XX/XX/XX * Name * XX/XX/XX

W-000-PI-CA-0005 Slug Force Calculation Rev T1


Calculation Sheet

2 Contents

1) Front Sheet Page No. 1

2) Contents Page No. 2

3) Calculation Page No. 3

Calculation No. Stress Report No. Project Title Rev Sheet


XX-PI-SLUG-000X XX-XXX-XX-XXXX Project X A1 1 of 3

W-000-PI-CA-0005 Slug Force Calculation Rev T1


Calculation Sheet

3 Slug Force Calculation

𝐹_𝐵𝑒𝑛𝑑=(𝐷𝐿𝐹).(2𝜌𝐴𝜐^2)/𝑔.sin⁡
〖 Θ/2 〗

𝐹_𝑇𝑒𝑒=(𝐷𝐿𝐹).(2𝜌𝐴𝜐^2)/𝑔

Outside Diameter of Pipe [OD] 88.9 mm

Pipe Wall Thickness [tn] 3.05 mm

Density of Fluid [ρ] 87.5 kg/m3

Velocity of Fluid [v] 29.6 m/s

Dynamic Load Factor [DLF] 2 Default value of 2 if data is not provided

Bend Angle [θ] 90 Degrees

Gravitational Acceleration [g] 9.81 m/s2

Cross Sectional Flow Area [A] 5384.6 m2

Slug Load at Bend [Fbend] 119.02 kgf

1167.6 N

Slug Load at Tee [Ftee] 168 kgf

1651.2 N

Title Project X Rev Sheet


Calculation No. XX-PI-SLUG-000X A1 2 of 3
W-000-PI-CA-0005 Slug Force Calculation Rev T1

You might also like