05-Standard Type Spring Units
05-Standard Type Spring Units
Vibration isolating a machine means to re- casings containing one or more helical GERB spring units may be fixed with
duce significantly any transmission of compression springs. Spring units are de- bolts, but in most cases our 4 mm thick
shock type, transient type or periodic type livered with a high quality painting (stand- resilient pads will provide safe fixing.
dynamic forces into the surroundings. ard colour: yellow, RAL 1004). On special
request these spring units are available For higher vertical loads and for low
Spring units belonging to our standard also in welded steel casings. speed GERB supplies spring units of spe-
program may be selected from the follow- cial design with load capacities of up to
ing tables for all machines which cause The spring units are designed for load ca- 3,000 kN (300 tons, 675 kips).
small dynamic forces compared to the to- pacities from 0.12 to 57 kN (12 to 5, 700
tal weight of the machine, e.g. wellbal- kg, 27 to 12,800 lbf) and can readily be Our technical offices would appreciate to
anced rotating machines or massbal- supplied for mounting with or without give you all required support regarding se
anced compressors. All listed spring units damping (Viscodamping® or Sordino-dam lection of spring units and the GERB
are available on short notice ex works ping). Damping might increase spring con range of activities. Please contact your
GERB Berlin. Spring units of this program stants and natural frequencies of the nearest GERB office or send a mail to
consist of cast iron made lower and upper spring units. [email protected].
���
S1 ���� �������� ��� ���
����
������
�������������
���� �������� ��� �������������������
�������������
�
������������� �������������� �������� ���������������� ����������������
�����
���� ��������������� ��������� �������������������������
��
��
�
�
���
���S1-12 ��� ��� �� ��� ��� �� �� ��
�������� S1-13 ��� ��� �� ��� ��� �� �� ��
������������� ��������
������������� S1-14 ��� ���� �� ��� ��� �� �� ��
����������������������������������������������������������������
S2 ���
��� ���
��� ���� ��������
������������� ���
��
������ ���� ��������
������������� �������������������
������ �� �������� ��������
������ ��
������������� ������������� �������������
����� �������������� �������� ���������������� ����������������
��������������
�������������� ����
���
�
���
������������� ����������������������������������������������������������������
���
���
����� �������������
���
���
�����
�
���
������������������������
�
��������
������������� �������� �������������� �������� ���������������� ����������������
������������� ���� ��������������� �������������� ������������������������
���
��� ��� ���� ������������������� ������ ������������������ ���������������������������
S3Q S3-241� ���� ���� ��� ��� ���� �� �� ��
S3-242�� ���� ���� ��� ��� ���� �� �� ��
��������
������ ��� ������������� S3-243�� ���� ���� ��� ��� ���� �� �� ��
���
���
���
��
���
��� ���� �� ��� ���� ��� ��� ��
�
D1-33
D1-34 ��� ���� �� ��� ���� ��� ��� ��
���
���
D1-35 ���� ���� ��� ��� ���� ��� ��� ��
D1-81 ���� ���� ��� ��� ���� ��� ��� ��
��������
D1-82 ���� ���� ��� ��� ���� ��� ��� �� �������������
D1-83� ���� ���� ��� ��� ���� ��� ��� �� ���
���
D1-84 ���� ����� ��� ��� ���� ��� ��� ��
D2, D3*
D1-85 ���� ����� ��� ��� ���� ��� ��� ��
������ �������
������ �������
���������������������������������������������������������������� ����� ��������� ����� ��������� ��� ���
���
���
���
�������������� ��������������
��������� ���������
������������������������ ���
���
���
�������������� �������� ���������������� ���������������� ���� ��������
�
������ �������������
���� ��������������� �������������� �����������������������
���� ������������������� ������ ������������������ ��������������������������� �������������
��
��
����� ���
D2-52� ��� ���� �� ��� ��� ��� ��� ���
D2-53 ���� ���� ��� ��� ��� ��� ��� ���
�
D2-55 ���� ����� ��� ��� ��� ��� ��� ��� ������� �������
��
��������� ���������
D2-56 ���� ����� ��� ��� ��� ��� ��� ���
D3-57* ��� ���� ��� ��� ��� ��� ��� ���
��������
This type can be supplied with height adjustment and/or damping. W1, W2 �������������
*) D3 welded elements with baseplate 250 x 170 x 8 mm
���
���� ��������
������ �������������
��������������������������������� �������������
����� ������ ���� ��������
�������������
���
���� ��������������� �������������� �����������������������
��
���
���� ���� ��� ��� ��� �� �� ��
�
W1-441�
W1-442 ���� ���� ��� ��� ��� �� �� ��
��������
W1-443 ���� ���� ��� ��� ��� �� �� �� �������������
���
W1-444 ���� ���� ��� ��� ��� �� �� �� ��������
�������������
W1-445 ���� ���� ��� ��� ��� �� �� ��
W1Q, W2Q
W1-446 ���� ���� ��� ��� ��� �� �� �� �����
�������������
W1-548 ���� ����� ���� ��� ��� �� �� �� �����
���
�������������������������������������������������������������������������������
��������������
��������������
������������ ������������
���� ����
�������������������������
�������� ��������
�������������� �������� ���������������� ���������������� ������������� �������������
��� ��� ��� ���
����� ��������������� �������������� �����������������������
�
��������������
GERB Schwingungsisolierungen
EFE_01 · Design: Sijades, Berlin · Printed: Woeste, Essen
[email protected]
www.gerb.com