SPECIFICATION

Materials Sound velocities between 1,000 m/s - 9,000 m/s - covers virtually all common engineering materials

Accuracy ±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with
Cygnus Instruments calibration procedure
Cygnus 4+ General Purpose
Resolution Multiple-Echo mode - 0.1 mm or 0.05 mm Multi-Mode Ultrasonic Thickness Gauge
Single-Echo and Echo-Echo modes - 0.01 mm

Probes Single crystal probes: Twin crystal probes:

Ÿ6 mm - 5 MHz (S5A) Ÿ5 mm - 7.5 MHz (T7A) New generation of ultrasonic thickness gauges
Ÿ13 mm - 2.25 MHz (S2C (standard)), Ÿ8 mm - 5 MHz (T5B (standard))
3.5 MHz (S3C) or 5 MHz (S5C) Ÿ13 mm - 2 MHz (T2C (for attenuative materials such as incorporating Multiple-Echo, Echo-Echo and
Ÿ19 mm - 2.25 MHz (S2D) cast metals, plastics and composites))
Single-Echo measuring modes
Measurement Single crystal probes: Twin crystal probes in Single-Echo: Twin crystal probes in Echo-Echo:
Range in Steel Ÿ3 mm - 250 mm with Ÿ2 mm - 250 mm with Ÿ5 mm - 50 mm with
2.25 MHz probe (S2C/D) 2 MHz probe (T2C) 2 MHz probe (T2C)
Ÿ2 mm - 150 mm with Ÿ1.5 mm - 200 mm with Ÿ4 mm - 50 mm with
3.5 MHz probe (S3C) 5 MHz probe (T5B) 5 MHz probe (T5B)
Ÿ1 mm - 50 mm with Ÿ0.7 mm - 50 mm with Ÿ3 mm - 25 mm with
5 MHz probe (S5C/A) 7.5 MHz probe (T7A) 7.5 MHz probe (T7A)
Connector Twin Lemo 00

Power 3 x AA batteries

Battery Life 10 hours minimum

Electronics Dual channel pulser

Display 2.4" quarter VGA LCD

Size 132 mm x 82 mm x 34 mm

Weight 300 grams (inc. batteries)

Operating Temp. -10°C to 50°C

Data Logging Capacity for up to 5000 points including A-scans

Computer CygLink allows remote logging and viewing of A-scan graphs. Survey and report generation to PDF file.
Software Graphic analysis of data and statistical calculations. Designed for Windows 7 and Windows 8.

Environmental IP67
Rating Explosive Atmosphere: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire
Protection Association Code (NFPA 70), Article 500, and tested using MIL STD 810G Method 511.5, Procedure I
MIL STD 810G Method 501.6 (high temp +55°C)
MIL STD 810G Method 502.6 (low temp -20°C)
MIL STD 810G Method 507.6 (humidity 95%)
MIL STD 810G Method 512.6 (immersion - 1 metre for 30 mins)
Shock and MIL STD 810G Method 514.7 (vibration - 1 hour each axis)
Impact MIL STD 810G Method 516.7 (shock 20g - 11ms half sine shock pulse, 40g 11ms in each axis)
MIL STD 810G Method 516.7 (26 drops - transit drop 1.22 m)

Compliance CE, British Standard BS EN 15317:2013

(specification for the characterisation and verification of ultrasonic thickness measuring equipment)

Environmental RoHS, WEEE compliant

Warranty 3 years on gauge and 6 months on probe

CYGNUS REGIONAL OFFICES *Specifications are subject to change

Cygnus Headquarters Cygnus USA Cygnus UAE Cygnus Singapore

Cygnus Instruments Ltd Cygnus Instruments Inc. Cygnus Instruments Middle East Cygnus Instruments (S) Pte Ltd
Cygnus House PO Box 6417 P.O. Box 127267 63 Jalan Pemimpin #05-01
30 Prince of Wales Road Annapolis Jebel Ali Free Zone (JAFZA) Pemimpin Industrial Building
Dorchester MD 21401 Dubai 577219
Dorset DT1 1PW USA UAE Singapore
United Kingdom
T: +44 (0) 1305 265 533 T: +1 (410) 267 9771 T: +971 50 3459305 T: +65 6252 5909
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.cygnus-instruments.com W: www.cygnusinstruments.com W: www.cygnus-instruments.com W: www.cygnus-instruments.sg

Manufactured
CYGNUS GAUGE
WARRANTY in the UK
CB24UK ISS 3
NEW CYGNUS 4+ GENERAL PURPOSE KEY FEATURES MULTI-MEASURING MODE CYGNUS PROBES AND CABLES
MULTI-MODE THICKNESS GAUGE Ÿ Multiple-Echo for reliable, accurate through coating Multiple-Echo uses three back wall echoes and measures Cygnus Stainless Steel INOX Probes
measurements remaining metal thickness while ignoring coatings. All (Single Crystal Probes)
measurements are error checked using 3 return echoes to
The NEW Cygnus 4+ is a small Ÿ Single-Echo and Echo-Echo measuring modes with twin give repeatable, reliable results. Accepted by all major The INOX probes have an updated ergonomic design and
and tough multi-mode ultrasonic crystal probes for extreme corrosion and back wall pitting classification societies. Uses single crystal probes for easier to read frequency, identification and serial number.
thickness gauge which features linear accuracy (and no probe zero required). All frequencies of INOX probes have a black face and a
an A-scan display and simple to Ÿ A-scan display colour coding system to identify probe frequencies. Used
use sequential data logging. in Multiple-Echo mode, these probes require no zeroing,
Ÿ MSI™ (Measurement Stability Indicator) used in have a high linear accuracy, are ideal for general thickness
Single-Echo and Echo-Echo measurement modes gauging, for use on pipes and have replaceable wear
Designed for the harshest of
membrane for long life.
environments, with a simple to Ÿ Simple linear data logging
use keypad, intuitive menus and
a colour LCD display which can Ÿ Large bright colour LCD screen with back light
be viewed in all lighting
conditions. Ÿ Deep-coat mode, measure through coatings up to 20 mm
thick
The twin shot injection moulded enclosure has a soft
but durable TPE outer skin which is comfortable to Ÿ Wrist mountable
hold and protects against bumps while the hard
Ÿ Min/max measurement limit functions with visual and S2C, S3C &
internal shell offers maximum strength and
vibrate alert S5C Probes
environmental protection certified to the demanding
US MIL STD 810G standard. Ÿ Intuitive easy to use menu
Cygnus Multiple-Echo Diagram
The unit still relies on Multiple-Echo to provide simple Ÿ Extremely rugged enclosure – shock and impact to US
and accurate measurements, with the added benefit MIL STD 810G Cygnus Stainless Steel INOX Probes
of Echo-Echo and Single-Echo using twin crystal Echo-Echo uses two back wall echoes and measures (Twin Crystal Probes)
probes for extreme corrosion. Echo-Echo for Ÿ Environmental sealing to IP67 – US MIL STD 810G remaining metal thickness while ignoring coatings up to 1
measurements on painted metals but with heavy back mm thick using twin crystal probes for improved detection Used in Echo-Echo and Single-Echo modes for a focussed
wall corrosion / pitting and Single-Echo for Ÿ Cygnus echo strength bars to assist quick of back wall corrosion and pitting. ultrasound beam for improved measurability on extreme
measurements back wall corrosion and pitting.
measurements on uncoated surfaces with heavy front
Single-Echo uses one back wall echo, measures
face and/or back-wall corrosion and attenuative Ÿ Buttons integral with the TPE moulding and designed for remaining metal thickness on uncoated surfaces and is
materials such as cast metals or plastics / minimum 100,000 depressions. ideal for areas with extreme front face or back wall
composites. corrosion and pitting. Effective on highly attenuative
materials such as cast metals, plastics and composites.
DATA LOGGING KEY FEATURES T5B Probe

Ÿ Versatile data logging which allows measurements and MEASUREMENT STABILITY INDICATOR
A-scans to be saved (MSI™)
Ÿ 5,000 measurement points (including A-scan) per record This feature helps ensure only stable measurements are T7A Probe
All Cygnus thickness gauges are supplied with a displayed in Echo-Echo and Single-Echo modes.
Ÿ Records are saved to a removable SD card Displayed measurements change from red to green and a
3 YEAR Cygnus Gauge Warranty as standard Cygnus Cables
vibrate alert indicates a stable and accurate reading.
Ÿ Selectable auto-log feature
Using standard industry connectors the probe lead uses a
custom made over moulded cable that offers superior
Ÿ Records easily transferred via gauge USB port to Cyglink
CYGLINK SOFTWARE flexibility and resistance to oils and ultraviolet light. The
CYGNUS GAUGE software where they can be exported to a CSV file or a cable will not stiffen after exposure to ultraviolet light.
WARRANTY
PDF report.
CygLink is a Windows® application which is used to
transfer information from the Cygnus 4+ thickness gauge to
a computer. The information can then be used as a PDF STANDARD KIT CONTENTS
report or CSV file which can be analysed, stored and
exported. Cygnus 4+ ultrasonic thickness gauge; padded carry case;
operating manual; adjustable neck strap and loops; wrist
strap; accessory pouch; spare membranes; surface and
membrane couplant; test block; 3 x AA batteries; mini USB -
USB cable and instruction manual optional Krusell® belt
clip.

CygLink Software Screenshot

NEW CYGNUS 4+ GENERAL PURPOSE KEY FEATURES MULTI-MEASURING MODE CYGNUS PROBES AND CABLES
MULTI-MODE THICKNESS GAUGE Ÿ Multiple-Echo for reliable, accurate through coating Multiple-Echo uses three back wall echoes and measures Cygnus Stainless Steel INOX Probes
measurements remaining metal thickness while ignoring coatings. All (Single Crystal Probes)
measurements are error checked using 3 return echoes to
The NEW Cygnus 4+ is a small Ÿ Single-Echo and Echo-Echo measuring modes with twin give repeatable, reliable results. Accepted by all major The INOX probes have an updated ergonomic design and
and tough multi-mode ultrasonic crystal probes for extreme corrosion and back wall pitting classification societies. Uses single crystal probes for easier to read frequency, identification and serial number.
thickness gauge which features linear accuracy (and no probe zero required). All frequencies of INOX probes have a black face and a
an A-scan display and simple to Ÿ A-scan display colour coding system to identify probe frequencies. Used
use sequential data logging. in Multiple-Echo mode, these probes require no zeroing,
Ÿ MSI™ (Measurement Stability Indicator) used in have a high linear accuracy, are ideal for general thickness
Single-Echo and Echo-Echo measurement modes gauging, for use on pipes and have replaceable wear
Designed for the harshest of
membrane for long life.
environments, with a simple to Ÿ Simple linear data logging
use keypad, intuitive menus and
a colour LCD display which can Ÿ Large bright colour LCD screen with back light
be viewed in all lighting
conditions. Ÿ Deep-coat mode, measure through coatings up to 20 mm
thick
The twin shot injection moulded enclosure has a soft
but durable TPE outer skin which is comfortable to Ÿ Wrist mountable
hold and protects against bumps while the hard
Ÿ Min/max measurement limit functions with visual and S2C, S3C &
internal shell offers maximum strength and
vibrate alert S5C Probes
environmental protection certified to the demanding
US MIL STD 810G standard. Ÿ Intuitive easy to use menu
Cygnus Multiple-Echo Diagram
The unit still relies on Multiple-Echo to provide simple Ÿ Extremely rugged enclosure – shock and impact to US
and accurate measurements, with the added benefit MIL STD 810G Cygnus Stainless Steel INOX Probes
of Echo-Echo and Single-Echo using twin crystal Echo-Echo uses two back wall echoes and measures (Twin Crystal Probes)
probes for extreme corrosion. Echo-Echo for Ÿ Environmental sealing to IP67 – US MIL STD 810G remaining metal thickness while ignoring coatings up to 1
measurements on painted metals but with heavy back mm thick using twin crystal probes for improved detection Used in Echo-Echo and Single-Echo modes for a focussed
wall corrosion / pitting and Single-Echo for Ÿ Cygnus echo strength bars to assist quick of back wall corrosion and pitting. ultrasound beam for improved measurability on extreme
measurements back wall corrosion and pitting.
measurements on uncoated surfaces with heavy front
Single-Echo uses one back wall echo, measures
face and/or back-wall corrosion and attenuative Ÿ Buttons integral with the TPE moulding and designed for remaining metal thickness on uncoated surfaces and is
materials such as cast metals or plastics / minimum 100,000 depressions. ideal for areas with extreme front face or back wall
composites. corrosion and pitting. Effective on highly attenuative
materials such as cast metals, plastics and composites.
DATA LOGGING KEY FEATURES T5B Probe

Ÿ Versatile data logging which allows measurements and MEASUREMENT STABILITY INDICATOR
A-scans to be saved (MSI™)
Ÿ 5,000 measurement points (including A-scan) per record This feature helps ensure only stable measurements are T7A Probe
All Cygnus thickness gauges are supplied with a displayed in Echo-Echo and Single-Echo modes.
Ÿ Records are saved to a removable SD card Displayed measurements change from red to green and a
3 YEAR Cygnus Gauge Warranty as standard Cygnus Cables
vibrate alert indicates a stable and accurate reading.
Ÿ Selectable auto-log feature
Using standard industry connectors the probe lead uses a
custom made over moulded cable that offers superior
Ÿ Records easily transferred via gauge USB port to Cyglink
CYGLINK SOFTWARE flexibility and resistance to oils and ultraviolet light. The
CYGNUS GAUGE software where they can be exported to a CSV file or a cable will not stiffen after exposure to ultraviolet light.
WARRANTY
PDF report.
CygLink is a Windows® application which is used to
transfer information from the Cygnus 4+ thickness gauge to
a computer. The information can then be used as a PDF STANDARD KIT CONTENTS
report or CSV file which can be analysed, stored and
exported. Cygnus 4+ ultrasonic thickness gauge; padded carry case;
operating manual; adjustable neck strap and loops; wrist
strap; accessory pouch; spare membranes; surface and
membrane couplant; test block; 3 x AA batteries; mini USB -
USB cable and instruction manual optional Krusell® belt
clip.

CygLink Software Screenshot

SPECIFICATION
Materials Sound velocities between 1,000 m/s - 9,000 m/s - covers virtually all common engineering materials

Accuracy ±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with
Cygnus Instruments calibration procedure
Cygnus 4+ General Purpose
Resolution Multiple-Echo mode - 0.1 mm or 0.05 mm Multi-Mode Ultrasonic Thickness Gauge
Single-Echo and Echo-Echo modes - 0.01 mm

Probes Single crystal probes: Twin crystal probes:

Ÿ6 mm - 5 MHz (S5A) Ÿ5 mm - 7.5 MHz (T7A) New generation of ultrasonic thickness gauges
Ÿ13 mm - 2.25 MHz (S2C (standard)), Ÿ8 mm - 5 MHz (T5B (standard))
3.5 MHz (S3C) or 5 MHz (S5C) Ÿ13 mm - 2 MHz (T2C (for attenuative materials such as incorporating Multiple-Echo, Echo-Echo and
Ÿ19 mm - 2.25 MHz (S2D) cast metals, plastics and composites))
Single-Echo measuring modes
Measurement Single crystal probes: Twin crystal probes in Single-Echo: Twin crystal probes in Echo-Echo:
Range in Steel Ÿ3 mm - 250 mm with Ÿ2.5 mm - 250 mm with Ÿ5 mm - 50 mm with
2.25 MHz probe (S2C/D) 2 MHz probe (T2C) 2 MHz probe (T2C)
Ÿ2 mm - 150 mm with Ÿ1.5 mm - 200 mm with Ÿ4 mm - 50 mm with
3.5 MHz probe (S3C) 5 MHz probe (T5B) 5 MHz probe (T5B)
Ÿ1 mm - 50 mm with Ÿ0.8 mm - 50 mm with Ÿ3 mm - 25 mm with
5 MHz probe (S5C/A) 7.5 MHz probe (T7A) 7.5 MHz probe (T7A)
Connector Twin Lemo 00

Power 3 x AA batteries

Battery Life 10 hours minimum

Electronics Dual channel pulser

Display 2.4" quarter VGA LCD

Size 132 mm x 82 mm x 34 mm

Weight 300 grams (inc. batteries)

Operating Temp. -10°C to 50°C

Data Logging Capacity for up to 5000 points including A-scans

Computer CygLink allows remote logging and viewing of A-scan graphs. Survey and report generation to PDF file.
Software Graphic analysis of data and statistical calculations. Designed for Windows 7 and Windows 8.

Environmental IP67
Rating Explosive Atmosphere: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire
Protection Association Code (NFPA 70), Article 500, and tested using MIL STD 810G Method 511.5, Procedure I
MIL STD 810G Method 501.6 (high temp +55°C)
MIL STD 810G Method 502.6 (low temp -20°C)
MIL STD 810G Method 507.6 (humidity 95%)
MIL STD 810G Method 512.6 (immersion - 1 metre for 30 mins)
Shock and MIL STD 810G Method 514.7 (vibration - 1 hour each axis)
Impact MIL STD 810G Method 516.7 (shock 20g - 11ms half sine shock pulse, 40g 11ms in each axis)
MIL STD 810G Method 516.7 (26 drops - transit drop 1.22 m)

Compliance CE, British Standard BS EN 15317:2013

(specification for the characterisation and verification of ultrasonic thickness measuring equipment)

Environmental RoHS, WEEE compliant

Warranty 3 years on gauge and 6 months on probe

*Specifications are subject to change

Manufactured
in the UK
CB24UK ISS 3