www.ascosintering.

com Asco Sintering ISO 9001:2000

TRANSVE ULTIMAT IMPACT APPARENT

RSE YIELD E TENSILE STRENGT HARDNESS YOUNG'S EQUIVALENT
DENSITY RUPTURE STRENGTH STRENGT ELONGATI H FT-lbs ROCKWELL MODULUS MPIF
MATERIAL g/cm3 psi (A) psi(A) H psi(A) ON % (A,B) (A,E) (F) 10^6 psi (A) SPECIFICATION ASCO DESIGNATION APPLICATIONS

IRON 7.0 72000 22000 32000 5 15 HRB 70 21.0 F-0000-17 Soft magnetic applications.

CARBON STEEL 6.9 76000 28000 38000 1.5 5 HRB 55 19.5 F-0005-25 Moderate strength and machinability
7.0 140000 80000 80000 <0.5 4 HRC 25 20.5 F-0005-70 HT High strength
7.0 100000 40000 57000 1 5 HRB 70 20.5 F-0008-35 Good strength
7.1 145000 90000 95000 < 0.5 5 HRC 35 21.5 F-0008-85 HT Highest strength and wear

COPPER STEEL 6.7 95000 45000 50000 < 1.0 5 HRB 60 17.5 FC-0205--40 Medium strength structural parts
6.8 120000 86000 90000 < 0.5 4.5 HRC 31 18.5 FC-0205-80HT Heat treatment for wear and strength
6.7 125000 55000 60000 < 1.0 5 HRB 73 17.5 FC-0208-50
6.8 130000 91000 90000 < 0.5 4.5 HRC 35 18.5 FC-0208-80HT

NICKEL STEEL 6.9 100000 30000 50000 2.5 12 HRB 59 19.5 FN-0205-25 Heat treatable nickel steel
6.9 160000 110000 120000 < 0.5 4.5 HRC 29 19.5 FN-0205-105HT provides high strengh,
6.9 105000 40000 55000 1.5 8 HRB 71 19.5 FN-0208-35 wear and impact.
6.9 150000 124000 120000 < 0.5 4.5 HR 31 19.5 FN-0208-105HT
7.0 120000 40000 60000 3 14.5 HRB 71 20.5 FN-0405-35
7.0 200000 103000 135000 < 0.5 6.5 HRC 31 20.5 FN-0405-130HT

HYBRID LOW 7.1 230000 140000 150000 < 1.0 9 HRC 36 21 FLN-4205-140HT Heat treated low alloy steel
ALLOY STEEL 7.1 260000 145000 170000 <0.5 10 HRC 38 21 FLN2-4405-160HT provides high strength and wear
7.2 280000 160000 190000 <0.5 10 HRC 40 22.5 FLN2-4405 ASCO-180HT-UTS
7.0 175000 110000 120000 1.5 11 HRB 90 N/A FLN4C-4005 ASCO-110 Yield strength As-sintered low alloy steel
7.2 182000 125000 135000 1.6 16 HRB 96 N/A FLN4C-4005 ASCO-125 Yield strength provides high impact strength

SINTER HARDENING 6.9 280000 100000 140000 <0.5 10 HRC 33 N/A FLNC-4408 (MOD) Cost effective low alloy steel
7.0 190000 N/A 100000 < 1.0 9 HRC 31 20.5 FLC-4608-90 HT provides high strength and wear
7.0 260000 135000 140000 <0.5 10 HRC 30 N/A FL-5305 ASCO-130HT-UTS
7.2 280000 150000 160000 <0.5 11 HRC 33 N/A FL-5305 ASCO-160HT-UTS

Sheet1 Confidential Page 1

 www.ascosintering.com Asco Sintering ISO 9001:2000

TRANSVE ULTIMAT IMPACT APPARENT

RSE YIELD E TENSILE STRENGT HARDNESS YOUNG'S EQUIVALENT
DENSITY RUPTURE STRENGTH STRENGT ELONGATI H FT-lbs ROCKWELL MODULUS MPIF
MATERIAL g/cm3 psi (A) psi(A) H psi(A) ON % (A,B) (A,E) (F) 10^6 psi (A) SPECIFICATION ASCO DESIGNATION APPLICATIONS

INFILTRATED STEEL 7.3 166000 60000 87000 3 10 HRB 89 23.5 FX-1008-50 Copper infiltration provides
7.3 189000 115000 120000 < 0.5 6.5 HRC 43 23.5 FX-1008-110HT machinability and toughness
7.3 156000 70000 80000 1 7 HRB 90 21 FX-2008-60 As heat treated it provides
7.3 159000 74000 100000 < 0.5 5 HRC 36 21 FX-2008-90HT wear resistance and toughness

HI-PERFORMANCE 7.0 300000 110000 150000 1.75 20 HRC 33 N/A ASCO Hi-Strength 1 High strength & good ductility
ALLOYS 6.9 300000 110000 152000 1.5 15 HRC38 N/A ASCO Hi-Strength 2 High strength, impact, & hardness
7.5 N/A 113000 155000 1.5 16 HRC38 N/A ASCO Hi-Impac 1 High strength, impact, & hardness
7.5 N/A 95000 130000 3.5 34 HRC20 N/A ASCO Hi-Impac 2 Very high impact. High Strength
7.5 N/A 65000 90000 7.5 110 HRB85 N/A ASCO Hi-Impac 3 Best impact resistant PM Material

Sheet1 Confidential Page 2

 www.ascosintering.com Asco Sintering ISO 9001:2000

TRANSVE ULTIMAT IMPACT APPARENT

RSE YIELD E TENSILE STRENGT HARDNESS YOUNG'S EQUIVALENT
DENSITY RUPTURE STRENGTH STRENGT ELONGATI H FT-lbs ROCKWELL MODULUS MPIF
MATERIAL g/cm3 psi (A) psi(A) H psi(A) ON % (A,B) (A,E) (F) 10^6 psi (A) SPECIFICATION ASCO DESIGNATION APPLICATIONS

STAINLESS STEEL 6.4 108000 34000 41000 0.5 5 HRB 59 15.5 SS-316N1-25 Good strength and corrosion propertie
300 SERIES 6.4 86000 32000 39000 0.5 3.5 HRB 62 15.5 SS-303N1-25
6.9 N/A 46000 68000 10 35 HRB 70 20 SS-303N1-38 Best machinability for stainless
6.9 N/A 24000 48000 20 55 HRB 35 20 SS-303L-15 good corrosion resistance
6.9 N/A 45000 70000 13 48 HRB 65 20 SS-316N2-38 High corrosion resistance and
6.9 N/A 30000 57000 21 65 HRB 45 20 SS 316L-22 good mechanical properties

STAINLESS STEEL 6.5 113000 93000 105000 < 0.5 2.5 HRC 23 18 SS-410-90HT Hardenable and magnetic
400 SERIES 7 N/A 30000 50000 15 65 HRB 50 24 SS-434L-24 Less corrosion resistance

MONEL 8.7 N/A 34000 79000 48 N/A HRB 60 26 ASTM B164 Extremely ductle/Highly corrosion resista
COPPER 8.3 N/A 10000 28000 25 45 HRH 30 13.5 C-0000-7 Contacts and heat sinks
BRASS 7.6 57000 15000 27000 14 12 HRH 80 12 CZP-3002-13 Structural and appearance
7.6 52000 13500 23000 9 27 HRH 73 12.5 CZP-2002-11
8.0 71000 16500 31500 16 25 HRH 88 13.5 CZP-3002-14
8.0 70000 17000 35000 18 45 HRH 82 14.5 CZP-2002-12
NICKEL SILVER 7.9 50000 18000 26000 10 22 HRH 86 13.5 CNXP-1816 Cosmetic and structural

SOFT-MAGNETIC 7.0 72000 22000 32000 5 15 HRB 70 21.0 F-0000-17 Magnetically responsive
7.0 N/A 32000 45000 10 N/A HRB 45 20.5 FY-4500 used for armatures, pole
7.5 N/A 25000 40000 15 68 HRB 40 16 FN-5000 pieces and rotors

FULL DENSITY 7.6 N/A N/A N/A N/A N/A HRC 35-60 N/A SS-440 C ASCO-HD-440 C High density for food processing
STAINLESS and medical applications
440 C

Sheet1 Confidential Page 3