Scribd
Upload
60 views

Lab 7: Redistribution

Uploaded by

sugapriya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
60 views

Lab 7: Redistribution

Uploaded by

sugapriya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Lab 7: Redistribution

Task

1. Configure IP Address as per given in topology.


2. Configure OSPF Area's as per given in topology and provide router id as per router number (like
1.1.1.1 for R1) and configure OSPF through interface only in Area 20.
3. Make sure R5 and R6 able to ping R1. (Do possible changes according to you).
4. Configure EIGRP as per given in topology. Make sure EIGRP AS number is 100.
5. Enable RIP as per given in topology. Make sure RIP v2 configure.
6. Basic redistribution between RIP and OSPF. (All subnets will be redistribute)
7. Basic redistribution between OSPF to EIGRP (all subnets will be redistribute and exclude R6 for
Redistribution).
8. All the Loopback will be manual summarize.

After Completion of this task, verify routes and ping all the routers each other.
Lab 7: Redistribution
Solution
 Task 2: Configure OSPF Area's as per given in topology and provide router id as per router
number (like 1.1.1.1 for R1) and configure OSPF through interface only in Area 20.

R1

router ospf 1
router-id 1.1.1.1
network 10.0.12.0 0.0.0.255 area 0
network 10.0.13.0 0.0.0.255 area 0

R2

router ospf 1
router-id 2.2.2.2
network 10.0.12.0 0.0.0.255 area 0
network 10.0.24.0 0.0.0.255 area 10

R3

router ospf 1
router-id 3.3.3.3
network 10.0.13.0 0.0.0.255 area 0
network 10.0.34.0 0.0.0.255 area 10

R4

router ospf 1
router-id 4.4.4.4
network 10.0.24.0 0.0.0.255 area 10
network 10.0.34.0 0.0.0.255 area 10

R5

interface Serial0/0
ip ospf 1 area 20

R6

interface Serial0/0
ip ospf 1 area 20
Lab 7: Redistribution
 Task 3: Make sure R5 and R6 able to ping R1. (Do possible changes according to you).

R2

router ospf 1
area 10 virtual-link 4.4.4.4

R3

router ospf 1
area 10 virtual-link 4.4.4.4

R4

router ospf 1
area 10 virtual-link 3.3.3.3
area 10 virtual-link 2.2.2.2

 Task 4: Configure EIGRP as per given in topology. Make sure EIGRP AS number is 100.

R3

router eigrp 100


network 10.0.37.0 0.0.0.255
no auto-summary

R6

router eigrp 100


network 10.0.67.0 0.0.0.255
no auto-summary

R7

router eigrp 100


network 10.0.37.0 0.0.0.255
network 10.0.67.0 0.0.0.255
network 10.0.70.0 0.0.0.255
network 10.0.71.0 0.0.0.255
no auto-summary

R10

router eigrp 100


network 10.0.70.0 0.0.0.255
network 10.0.110.0 0.0.0.255
Lab 7: Redistribution
network 10.10.1.0 0.0.0.255
network 10.10.2.0 0.0.0.255
network 10.10.3.0 0.0.0.255
network 10.10.4.0 0.0.0.255
no auto-summary

R11

router eigrp 100


network 10.0.71.0 0.0.0.255
network 10.0.110.0 0.0.0.255
network 11.11.1.0 0.0.0.255
network 11.11.2.0 0.0.0.255
network 11.11.3.0 0.0.0.255
network 11.11.4.0 0.0.0.255
no auto-summary

 Task 5: Enable RIP as per given in topology. Make sure RIP v2 configure.

R2

router rip
version 2
network 10.0.0.0
no auto-summary

R5

router rip
version 2
network 10.0.0.0
no auto-summary

R8

router rip
version 2
network 10.0.0.0
no auto-summary

R9

router rip
version 2
Lab 7: Redistribution
network 9.0.0.0
network 10.0.0.0
no auto-summary

 Task 6: Basic redistribution between RIP and OSPF. (All subnets will be redistribute)

R2

router ospf 1
redistribute rip metric 1 subnets

router rip
redistribute ospf 1 metric 1

R5

router rip
redistribute ospf 1 metric 1

router ospf 1
redistribute rip metric 1 subnets

 Task 7: Basic redistribution between OSPF to EIGRP (All subnets will be redistribute and
exclude R6 for Redistribution).

R3

router eigrp 100


redistribute ospf 1 metric 1 1 1 1 1

router ospf 1
redistribute eigrp 100 metric 1 subnets

 Task 8: All the Loopback will be manual summarize.

R9

interface FastEthernet0/0
ip summary-address rip 9.9.0.0 255.255.248.0

R10

interface Serial0/0
ip summary-address eigrp 100 10.10.0.0 255.255.248.0
Lab 7: Redistribution
interface Serial0/1
ip summary-address eigrp 100 10.10.0.0 255.255.248.0

R11

interface Serial0/0
ip summary-address eigrp 100 11.11.0.0 255.255.248.0

interface Serial0/1
ip summary-address eigrp 100 11.11.0.0 255.255.248.0

You might also like