Scribd
Upload
69 views1 page

Ds DMH 600 Ptfe Virgin

This document provides the mechanical, physical, thermal, and chemical properties of DMH 600 PTFE virgin. Key properties include a density of 2150 kg/m3, a Shore D hardness of 55 +/- 3, a tensile strength greater than or equal to 27 MPa, an elongation at break greater than or equal to 250%, a thermal conductivity of 0.8 m*h*K, a coefficient of thermal expansion of 19 K-1 * 10-5, and resistance to most chemicals with the exceptions of halogenides, elemental fluorine, CF3, and molten alkali metals. The document also lists DMH GmbH as the manufacturer and provides contact information.

Uploaded by

Muhammad Ejaz Qureshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

Ds DMH 600 Ptfe Virgin

This document provides the mechanical, physical, thermal, and chemical properties of DMH 600 PTFE virgin. Key properties include a density of 2150 kg/m3, a Shore D hardness of 55 +/- 3, a tensile strength greater than or equal to 27 MPa, an elongation at break greater than or equal to 250%, a thermal conductivity of 0.8 m*h*K, a coefficient of thermal expansion of 19 K-1 * 10-5, and resistance to most chemicals with the exceptions of halogenides, elemental fluorine, CF3, and molten alkali metals. The document also lists DMH GmbH as the manufacturer and provides contact information.

Uploaded by

Muhammad Ejaz Qureshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DMH 600 PTFE virgin

Mechanical, Physical and Thermal Properties

properties condition standard unit unit


colour white white
density/specific gravity 23 °C DIN 53479 kg/m³ 2150 g/cm³ 2,15
hardness 23 °C/3 sec. ISO 868 Shore D 55 ±3 Shore D 55 ±3
hardness 23°C/15 sec. ISO 868 Shore D 53 ±3 Shore D 53 ±3
ball indentation hardness 23 °C DIN 53456 H 135/30 MPa 23 ±5 psi 3335 ±725
tensile strength 23 °C ASTM D 4745-11a MPa ≥ 27 psi ≥ 3916
elongation at break 23 °C ASTM D 4745-11a % ≥ 250 % ≥ 250
compressive strength 23 °C DIN 53455 MPa ≥4 psi ≥ 580
J * 10³ J * 10³
thermal conductivity DIN 52612 m*h*K 0,8 m*h*K 0,8
coefficient of thermal
expansion 25 °C - 200 °C K-1 * 10-5 19 K-1 * 10-5 19
coefficient of friction * 23 °C µ 0,08 µ 0,08
minimum service temperature °C -200 °F -328
maximum service temperature °C 260 °F 500
young's modulus 23 °C DIN 53457 MPa 540 psi 78500
* coefficient of friction dry dynamic Steel 16MnCr5 v=0,6m/s; p=0,05 MPa; t=5h

Chemical Properties

Filled PTFE
Resistant to almost all chemicals
Not resistant to halogenides, elemental fluorine, CF3, molten alkali metals
Foodstuff applications FDA approval

Detailed information concerning chemical resistance see DMH Chemical Resistance Guide

DMH GmbH revision: 04-2020

DMH Dichtungs- und Maschinenhandel GmbH


A-8772 Traboch Industriepark West 11
T: +43 (0)3833/200 60-0 F: +43 (0)3833/200 60-500
E: [email protected] www.dmh.at

You might also like