FISH FINDERContent Introduction , Attention How To Install The Battery Sonar Sensor Using Induction . Applied Mode... Power Supply Sonar Sensor Introduction Display Interface . Menu Key Introduction Sensitivity Setting . Fish Alarm Setting Depth Alarm Setting . Backlight Chart Speed Setting... Unit Setting Depth Range Setting. . Mode Set Noise Filter . Analysis Of Frequently Asked Questions . ‘The Product Maintenance ‘The Product Specification 23 45 15.16 16-17 i718 9 19:21 2 2B1. Introduction : ‘Thanks for choosing the Fish Finder of our company. his unit is designed for the fishing lovers. The unit ean be used in rivers, lakes,or sea.We offer 12 months’ maintenance with any damages by non-human factors;The specific warranty terms refer to the guarantee lists.To familiarize yourself better with the product's operation and maximize the function Please read the User's Guide carefully for better use-For any possible problems you may encounter during the operation please read the User's Guide for reference,or contact our technical staf The following items are inluded inthe product: 1) A wireless remote sonar sensor 2) A handheld wireless receiving host 3) Acopy of User's Guide 4)A charge cable 2. Attention: “The product disassembly and maintenance are only to be pecformed by our company technical personnel. Any ofthe following situations will be outside of warranty guarantee: 1. Unauthorized disassembly or maintenance. 2, Any man-made damage 3. The handheld host drop into the water. 1 3. How to install the battery Installation steps are as follows: 1.Open the back cover of battery. 2cInstall the battery;be certain to follow the marks on the inside of the box according to the battery indicator symbols. 43.Slide the battery cover towards the top of the unit until itis completely closed. Not 1. There are two ports ofthe charging line, USB port connects SV DC power supplyanother connec the sonar sensor's DC jock. 2. When the probe's battery is lower than 3.2V, the battery indicator symbol on the host sereen will twinkle. It means the probe should stop Working and need vo charge. 3. If there is water inside,please don't charge.to avoid adverse consequences.and it should be sent back to the fatory to get maintenance 18 soon as possible! 4. When charging, charging indicator (re) willbe on; and the light will ‘he off when the batteries are full,ch bl jarging cable oo Charging port Base Sonar Sensor Using Induetion: (tie the sensor to the rod) Probe Depth Probe Area (m) (™) 5 0 0 2 8 20 2 2 7 3 60 33 * a % ‘You can refer the char! This product is designed with usct-tiendliness in mind. Attach the sensor tothe fishing rod’s extreme and throw them into water as you do with float and baits. After switching on the main unit's power on, you ae ready to fish. Sonar technology is used in the product, the sensor transmits ultrasonic waves to the water, and the microprocessor will filter and analyze the fed-back signals. The analysis result will display tothe sereen afer being compiled, The latest dais displayed on the very right ofthe sereen but disappears on the left, The water botiom contours are showed inthe middle as well as water depth, fsh size, and location et. 4. Attention: 1. While the sensor is work, do not hold it at the bottom; otherwise, the 4testing results may be error or even damage to intemal structures and elements. To pick up the sensor working in water, please tke hold ofthe antenna post at the sensor's top. 2. The sonar sensor is designed to work durably in normal service However, due to the wave of ups and dovins inthe water, it may impact Sensors oF make it hit the rocks and other objects, which will result in damages tothe device. Therefore, for water areas with depth less than 2 foot (0.6m), we recommend that you avoid using the unit 5. Applied mode: 1. Sonar Graphie Mode: Fish finder renders real-time conditions ofthe water bottom with sonar raphic. Throw the sensor into water, drag it slowly ata stable speed, anc you can view accurate information displayed on the screen, including Water bottom contour, structure, depth ish location, et 2. Stationary Float Mode ‘Throw the sensor to water nd ft it undisturbed. It will oat onthe water surface, monitoring submarine news 4 real-time method. Information will be automatically updated on the screen as soon as the fish enter the sensor detecting area 6. Sonar sensor introduction: “The sonar sensor has two parts, One part is sonar, the other is RF, Signal acquisition depends on sonar part, Signal communi tion depends on RF par, LLPower supply The sonar sensor is supplied by a Polymer battery (3.7V). When the battery as run ou, you can recharge it. The method you can reference to the map. Electronic switeh ‘The sonar sensor's bottom has two pins. Its the switch. When the sonar Sensor i8 thrown into water the Sonar sensor will work by using the electrical conductivity of the water conduction. And you should keep it in a dry and insulated place after using, f you store it in a wet or conducted place, the humidity or conductor will eause the sonar sensor power on automatically, Please clean the sonar sensor with clean water and dy tin the sir before storing Sensor Working Theorem: ‘The sensor working theorem isthe electrical conductivity of water. Work process as follows: 1. When the sensor cones to the water, or the two pins touching water, 6the sensor will begin working, 2. When the sensor is dropped out from the water, you can dry the remained water from pin surfac the sensor will stop working automatically Water Switch Terminal Sonar Sensor Maintenane: 1. Do not place the sonar sensor in a wet area when not using, the ‘dampness may tun on the senso itself automatically. The battery will be depleted fast. Also avoid placing it on a metal board? 2. You should keep it in a dry, nonmetal place! The place is far away fiom any metal equipment 3. Clean the water ofthe surface after us. Dry it inthe air before keep it s, How to use the sensor The two holes of the font end are for tying fishing thread. Ifyou desire to use it in the Stationary Float Mode, bind the ishing hook with fight threads to the second hole. However, be informed that if the sensor encounters barriers, the fishing thread can be easily broken while being dragged toughly. For fear of the practice, we advise you not to pull the thread if unnecessary. for fear that you may be unable to segain your sensor due tothe broken thread Altematively, in ease you wish to drag the sensor as you se fit, you may tie another light thread tothe first hole, therefore preventing the failure of receiving your sensor, bind the fishing hook with light threads to the second hole, Be caution not to hang over-weight to the hook line, thus the sensor will be likely to 8submerge, causing the signal terminates Display Interface Introduetio 1.Water Depth Reading|6. Depth Seale 2. Temperature Reading|7. Simulation Mode [3.Fish Teon [4 Bottom Contour [B-Depth Rann: [g. Transducer Power Indicator ‘9. Recevier Power Indicator 8, Menu key introduction: ‘The key design style of the product is simple and easy to operate, itis 8 ‘very convenient to complete the funtion set you are required Folarge key Batley Menukey Direction key Powerkey rower key" , tur on/off the power. Press the switch button for two seconds and then release, the power will be on, the unit stars working, Press the key for three secondls and release, the power will be off: Not } I you want to enter the simulation mode, you must enter the “SENIOR” menu at frst, And then select the simulation title to set 2)From simulation to normal mode, must enter“SENIOR” menu to close. ENT key” , function enter key, 3.*ESC key” , Exit the menu or parameter setting, 4: Enlarge key” , Enlarged underwater display 5.“DIRECTION key” , This key is used for title select parameter setting. 9.Parameter Settings : 0‘There are 3 menu bars, 9 parameters forthe user to choose and set. 9.1 Sensitivity Setting: Sensitivity indicates the intensity of sonar signal. The unit has 20-degree sensitivity for user to seleet. Normally, if you want to get more chances to detect the fish, itis up to choose « higher degree sensitivity. When the ‘water is shallow or exists noise (made by ship's motor etc), you should seleet low sensitivity, Thus the detection will be more accurate Operation as follows : Press" Bi" Menu key , entee"SONAR". Through up/down arrow to seleet. When*SENSITIVITY" parameter is selected,you can through the left! right adjust the"SENSITIVITY"as you want (5~100 % After setting, press“ESC"key, exit the parameter setting. The unit will enter normal work mode, NOTE: 5% isthe lowest , 100% isthe highest, SONAR SENSITIVITY Tots FISH ALARM. q orr > DEPTH ALARM dor > 9.2 Fish Alarm Setting Fish alarm is used to turn on/off the alarm when the unit detects fish, ‘When the fish alarm is on, it wll alarm if detecting fish. When the fish alarm is off, it won't alarm if detecting fish Operation as follows : Press* f "Menu key , enter SONAR®.Through up/down arrow to select, When*ALARM" parameter is selectedyou can through the Te right adjust ISH ALARM”. Thea you can set fish alarm on/off as you ‘want, After setting, press"ESC”key, exit the parameter setting. The unit will enter normal work mode. SONAR SENSITIVITY 445% D FISH ALARM DEPTH ALARM qorr > 29.3 Depth Alarm Setting 9.4Bachlight Seting Depth alarm is designed for user to set a number (I-99FThof depth. Backlight refers to external light source. The unit has white LED When the detecting depth is equal to or less than the setting, it will backlight, you can use it at night or under weak light. To prolong the alarm,Alerts the user! You can increase the depth or shutoff this function + battery life, please use this funetion only when you really need it to cancel the depth slarm Operation as follows : Operation as follows Press* "Menu key ,entee*DISPLAY": Through up/down arrow 10 Press* Ej "Menu key , enter SONAR” Through up/down arrow to select. s When*BACKLIGHT” parameter is seleeted,you can through When“ALARM"Parameter is selected,you can throu the leftiright the left/right adjust the*BACKLIGHT”as you want, After setting, adjust “DEPTH ALARM”, Then you can sot depth alarm (1-99FT.ofF) _press"ESC"key, exit the parameter setting. The unit will enter normal as you want, After setting, press"ESC"key, exit the parameter setting. work mode. ‘The unit will enter normal work mode, SONAR SENSITIVITY 45% D FISH ALARM DISPLAY BACKLIGHT CHART SPEED t 450% D UNIT SET doerd qorr > DEPTH ALARM om NOTE ; The unit ha 11 level backlight(10% is the darkest,100% is the NOTE: Depth alarm is mainly for navigation. User can set it up brightest 0% is Of)for user to choose. When Backlight off, press any key, according to the actual noods, to avoid running on the rocks. the backlight lamp will light 3 seconds later, automatically shut down. a 49.8Chart Speed Setting Operation as follows Chart Speed is adjust the screen updated speed. The unit has 10 grades Press“ & "Menu key , enter“DISPLAY”.Through up/down arrow to 100%" is the fastest)for user to choose. In general, you should set the Set When“ UNIT SET"parameter is selected, you can set unit as you want, After setting, press“ESC"key, exit the parameter setting. The unit update speed highest. Thus, you can update the detected underwater ! : uae iiesuaanel ee will enter normal work mode. information in time. Operation as follows t DISPLAY Press" "Menu key , enter“DISPLAY”,Through up/down arrow to BACKLIGHT select. When “CHART SPEED ” parameter is selected. Then you can set 50% D + chart speed (10~100% )as you want. After setting press"ESC"key, exit CHART SPEED the parameter sting, The uni wil enter normal work mode 50% D UNIT SET DISPLAY i> BACKLIGHT 50% D NOTE: UNIT SET is divided into imperial(IMP) and metrie( MET). CHART SPEED 4 50a UNIT SET ‘out of the biggest rang, no water bottom contour will be displayed on the deer -. 9.Depth Range Setting Depth range is the biggest depth of detect range. If the detected rang is soreen, In other words, the depth range setting is used to set the water 9.6 Unit Setting bottom contour width of the screen, For example, the water depth is 10 Unit setting refers to set the product measurement unit, Including Depth ‘meters, and the depth range is 20 meters, the water bottom contour width unit and Temperature unit of the display will be 50%.The product has six depth range (3, 6, 9, 18, 18 16SENIOR” Through up/down arrow to ‘Menu key , ent 36, AUTO) for the user to choose. Users ean choose aceording fo the actual water depth. Recommended depth range is set to be deeper than select. When*MODE SET"parameter is selected, you ean through left and closest to the actual depth of water, in order to obtain the best effect Fight artow adjust the “WORK MODE” as you want. of detection NOTE: Operation as follows L This product includes SIMU(simulation mode)and WORK(working Press“ gj "Menu key , enter“SENIOR” Through up/down arrow to 8) secu: WhenDEPTH RANGE” pant scleted, you ean tough | 2Simaton Mode refers to simulation es the depth of water nd fis Pee cu wn fr mens f PMNS eg rege fen and wets pos Bt xs arte i The wit wi ecer normal fo 3.Whether simulation or working mode, reboot automatically enter the ‘work mode last working mode. AIF the product doesnot receive reflected sonar signal in S minutes, (water mete ine does not move).he product will shat off automatically. MODE SET SENIOR qworkp } IDEPTH RANGE] NOISE FILTER qs quow D MODE SET 9.8 Mode SET 7 pat, NOISE FILTER “Mode Set is convenient for users to set the working mode of the product. 7 t it rn the ps qiow D Operation as follows, a 189.9 NOISE FILTER 1) This function is divided into off. lows medium, highs four levels offis detaut-The feature will enhance or educe the random noise of the display. 2) this feature is tumed off, all the acoustic signa inthe water will be displayed, ifthe adjustment to the low, will show all the matching ofthe ultrasoni reflection, if the adjustment to the megium, only the sound ‘wave signal of moderate intensity is displayed, and if the regulator is adjusted to the high, only the strongest signal of the group is displayed, MODE SET qworkp NOISE FILTER A, Can not power on 1L ) Please make sure the battery power is enough, and the battery is 9 correctly installed. 2 Please confirm that the environment temperature is above - 20°C (4 degrees F wenheit). When use the product in a cold environment, make sure that the whole working temperature is appropriate B, Depth indicator 1) Please confirm the water depth i in the range of | to 36 meters, the depth refers to the distance from the sensor to the water bottom, 2 ) Please confirm the water wave is small, the sensor floating on the water, and the state of water surfuceis stable 5) The water is too shallow. This is because of the sonar physical characteisti, the depth below 1 meter is within the blind spots of sonar. ‘Therefore, we recommend that wsers don't wse the unit in the smal enclosed water such as swimming pool or kegs. 4) Fishing on ice or "shoot-through” the hull of a boat, the number of depth readings will be unstable or displayed as "=" please confirm there {is no bubble between the hull or the ice and water. For the bubble will cause the fish finder not to work normally. 5) When Fishing on ice, depth indicator displays "--" .It maybe the environment temperature is lower than - 20 °C (-4 degrees Fahrenheit). ‘The internal sensor will stop the sonar pulse emission. 20C. Echo signal intermittent or depth display instable cannot detect the fish 11) Make sure the sonar sensor vertically downward 2) Underwater vegetation system is complicated,it will lead to the depth * reading disorder. Ifyou are sure of the reson, advise to sop use inthis retion. 3) Oil contamination would form a layer of thin film around the surface ‘ofthe sensor, it wll afect the normal werk. Please clean the stains of he sensor surface 4) The electrical noise of ship will effet the sensor to work normally. If encounter such a situation, please replace the senso, let i far fom the ship moto. 5) Please check the battory voltage. The battery voltage lower will ‘weaken the transmission poworof senso. 6) Check the sensitivity sting, ty to increase the sensitivity 7) Sensor may be in the rapids made by the ship. Ifs0, you should replace the sensor installation location to avoid the effet by the apis. 8) Speed over $ kit will lead to this situation, Please reduce the speed ! a |i oxder for your fish finder more atractive and durable, we recommend you follow the below steps 1. For the shell Cleaning the product's outer ease with a cloth dipped mild detergent except the sereen, and then dry itup. 2. For the Lens Use a piece of sof cloth o clean the lens. A litle fresh water or eyeglass cleaner can be used if needed fstubbom dirt or ol stains remain on the screen, do not be wiped with force , not serach the surface ‘This ation maybe seratch the Tens 3. For storage Never place your product in a wet or high-temperature or low temperature environment or on « metal board, Store the product in an insulation and dy place. Remove the battery before storage! -4Working temperature The tow temperature will eause damage to the electronie part, the ‘working environment temperature not lower than -20. °C (-4 degrees Farenheit ‘The product specification:1. Display Display: TFT LCD Display Size: $8x45mm Display Dot Number : 320°240 Backlight: White LED Backlight Sonar & Radio Depth Range: 2-148F¥0.6-36M Sonar Frequency: 125KHZ, Sonae Bear Angle: 90 degree Racio Frequency: 246 Operational Temperature: -20 70°C 3. Power Supply: Mainframe "AAA, Transducer: Polymer battery 3.7V