Scribd
Upload
61 views

Linearblockcoding

This document discusses linear block codes. [1] Linear block codes add redundancy to data by encoding it into blocks of n coded bits from k information bits. [2] A generator matrix is used to systematically encode messages into codewords. [3] The parity check matrix can be used to calculate the syndrome to detect errors in received codewords.

Uploaded by

Pavuluri Sairam
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
61 views

Linearblockcoding

This document discusses linear block codes. [1] Linear block codes add redundancy to data by encoding it into blocks of n coded bits from k information bits. [2] A generator matrix is used to systematically encode messages into codewords. [3] The parity check matrix can be used to calculate the syndrome to detect errors in received codewords.

Uploaded by

Pavuluri Sairam
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

CONTENTS

Introduction
Linear block codes
Generator matrix
Systematic encoding
Parity check matrix
Syndrome and error detection
Minimum distance of block codes
Applications
Advantages and Disadvantages
INTRODUCTION

The purpose of error control coding is to enable the


receiver to detect or even correct the errors by introducing
some redundancies in to the data to be transmitted.

There are basically two mechanisms for adding


redundancy:
1. Block coding
2. Convolutional coding
LINEAR BLOCK CODES

The encoder generates a block of n coded bits from k information


bits and we call this as (n, k) block codes.
The coded bits are also called as code word symbols.
Why linear???
A code is linear if the modulo-2 sum of two code words is
also a code word.
 n code word symbols can take 2𝑛 possible values. From
that we select 2𝑘 code words to form the code.
 A block code is said to be useful when there is one to one
mapping between message m and its code word c as
shown above.
GENERATOR MATRIX

 All code words can be obtained as linear combination of basis vectors.


 The basis vectors can be designated as {𝑔1 , 𝑔2 , 𝑔3 ,….., 𝑔𝑘 }
 For a linear code, there exists a k by n generator matrix such that
𝑐1∗𝑛 = 𝑚1∗𝑘 . 𝐺𝑘∗𝑛

where c={𝑐1 , 𝑐2 , ….., 𝑐𝑛 } and m={𝑚1 , 𝑚2 , ……., 𝑚𝑘 }


BLOCK CODES IN SYSTEMATIC FORM

In this form, the code word consists of (n-k) parity check bits
followed by k bits of the message.
The structure of the code word in systematic form is:

The rate or efficiency for this code R= k/n


G = [ 𝐼𝑘 P]
C = m.G = [m mP]
Message
part Parity part

Example:
Let us consider (7, 4) linear code where k=4 and n=7
𝒈𝟎 1101000
m=(1110) and G = 𝒈𝟏 = 0110100
𝒈𝟐 1110010
𝒈𝟑 1010001

c= m.G = 𝒎𝟏 𝒈𝟏 + 𝒎𝟐 𝒈𝟐 + 𝒎𝟑 𝒈𝟑 + 𝒎𝟒 𝒈𝟒

= 1.𝒈𝟏 + 𝟏. 𝒈𝟐 + 𝟏. 𝒈𝟑 + 𝟎. 𝒈𝟒
c = (1101000) + (0110100) + (1110010)
= (0101110)
Another method:
Let m=(𝑚1 , 𝑚2 , 𝑚3 , 𝑚4 ) and c= (𝑐1 , 𝑐2 , 𝑐3 , 𝑐4 , 𝑐5 , 𝑐6 , 𝑐7 )
1101000
c=m.G= (𝑚1 , 𝑚2 , 𝑚3 , 𝑚4 ) 0110100
1110010
1010001

By matrix multiplication we obtain :


𝑐1 =𝑚1 + 𝑚3 + 𝑚4 , 𝑐2 =𝑚1 + 𝑚2 + 𝑚3 , 𝑐3 = 𝑚2 + 𝑚3 + 𝑚4 , 𝑐4 =𝑚1 ,
𝑐5 =𝑚2 , 𝑐6 =𝑚3 , 𝑐7 =𝑚4

The code word corresponding to the message(1110) is (0101110) .


PARITY CHECK MATRIX (H)

 When G is systematic, it is easy to determine the


parity check matrix H as:
H = [𝐼𝑛−𝑘 𝑃𝑇 ]
 The parity check matrix H of a generator matrix is
an (n-k)-by-n matrix satisfying:
T
𝐻(𝑛−𝑘)∗𝑛 𝐺𝑛∗𝑘 =0
 Then the code words should satisfy (n-k) parity
check equations
T T
𝑐1∗𝑛 𝐻𝑛∗(𝑛−𝑘) = 𝑚1∗𝑘 𝐺𝑘∗𝑛 𝐻𝑛∗(𝑛−𝑘) =0
Example:
Consider generator matrix of (7, 4) linear block code
H = [𝐼𝑛−𝑘 𝑃𝑇 ] and G = [ 𝑃 𝐼𝑘 ]

The corresponding parity check matrix is:


1 0 0 1 0 1 1
H= 0 1 0 1 1 1 0
0 0 1 0 1 1 1
𝟏 𝟎 𝟎
1101000
G. 𝐻 𝑇 = 0110100
𝟎 𝟏 𝟎
𝟎
𝟏
𝟎
𝟏
𝟏
𝟎
=0
1110010
1010001 𝟎 𝟏 𝟏
𝟏 𝟏 𝟏
𝟏 𝟎 𝟏
SYNDROME AND ERROR DETECTION
 For a code word c, transmitted over a noisy channel, let r be
the received vector at the output of the channel with error e

c r = c+e
+
e

e i= 1, if r ≠c
0, if r=c

Syndrome of received vector r is given by:


T
s = r.H =(𝑠1 , 𝑠2 , 𝑠3 , … … . . , 𝑠𝑛−𝑘 )
Properties of syndrome:

 The syndrome depends only on the error pattern and


not on the transmitted word.
T T T T
s = (c+e).H = c.H + e.H = e.H
 All the error pattern differ by atleast a code word
have the same syndrome s.
Example:
Let C=(0101110) be the transmitted code and r=(0001110) be the
received vector.
s=r. 𝐻 𝑇 =(𝑠1 , 𝑠2 , 𝑠3 )
𝟏 𝟎 𝟎
=(𝑟1 , 𝑟2 , 𝑟3 , 𝑟4 , 𝑟5 , 𝑟6 , 𝑟7 ) 𝟎 𝟏 𝟎
𝟎 𝟎 𝟏
𝟏 𝟏 𝟎
𝟎 𝟏 𝟏
𝟏 𝟏 𝟏
𝟏 𝟎 𝟏

The syndrome digits are:


𝑠1 = 𝑟1 + 𝑟4 + 𝑟6 + 𝑟7 = 0
𝑠2 = 𝑟2 + 𝑟4 + 𝑟5 + 𝑟6 = 1
𝑠3 = 𝑟3 + 𝑟5 + 𝑟6 + 𝑟7 = 0
The error vector, e=(𝑒1 , 𝑒2 , 𝑒3 , 𝑒4 , 𝑒5 , 𝑒6 , 𝑒7 )=(0100000)
*
C= r + e
= (0001110)+(0100000)
= (0101110)
*
where C is the actual transmitted code word
MINIMUM DISTANCE OF A BLOCK CODE
Hamming weight w(c ) : It is defined as the number of non-zero
components of c.
For ex: The hamming weight of c=(11000110) is 4
Hamming distance d( c, x): It is defined as the number of places where
they differ .
The hamming distance between c=(11000110) and x=(00100100) is 4
 The hamming distance satisfies the triangle inequality
d(c, x)+d(x, y) ≥ d(c, y)
 The hamming distance between two n-tuple c and x is equal to the
hamming weight of the sum of c and x
d(c, x) = w( c+ x)
For ex: The hamming distance between c=(11000110) and x=(00100100)
is 4 and the weight of c + x = (11100010) is 4.
 Minimum hamming distance dmin : It is defined as the smallest
distance between any pair of code vectors in the code.
For a given block code C, dmin is defined as:
dmin=min{ d(c, x): c, x€C, c ≠ x}

 The Hamming distance between two code vectors in C is equal


to the Hamming weight of a third code vector in C.
dmin = min{w( c+x):c, x €C, c≠x}
= min{w(y):y €C, y≠ 0}
= w min
APPLICATIONS

 Communications:
Satellite and deep space communications.
Digital audio and video transmissions.
 Storage:
Computer memory (RAM).
Single error correcting and double error detecting code.
ADVANTAGES DISADVANTAGES

 It is the easiest and  Transmission bandwidth


simplest technique to requirement is more.
detect and correct errors.

 Error probability is  Extra bits reduces bit rate


reduced. of transmitter and also
reduces its power.
Thank you……

You might also like