V6.05.

02

Software Version：EasyBuilder Pro V6.05.02.526

New Supported Models

cMT3102X

Corrections

EasyBuilder Pro

1. Fixed the issue where in Operation Log, USB2 related information is not recorded for the
screen hardcopy action.
2. Fixed the issue where settings may change after decompilation. (Affected setting: “Use
alarm color” of numeric object )
3. (cMT) Fixed the issue where user logout does not occur automatically upon expiry when
using the USB security key.
4. (cMT3072X/XH) Fixed the issue where LB-9042 is not effective.
5. (cMT) Fixed the issue related to Trend Display’s channel visibility control. (Issue: channel
visibility cannot be controlled by the register after having adjusting it in the option
dialog.)
6. Fixed the issue where Group Library contents cannot be used in another file.
7. Fixed the issue where actions after writing of a Numeric Input object are executed too
early.
8. Fixed the issue where selecting array addresses as monitor address in Option List is
prohibited by the UI.
9. Fixed the issue where updated MQTT parameters are not retained following reboot.
10. Fixed the conflicts between OPC UA Server and Remote HMI that prevent them to
function normally at the same time
11. Daylight Save Time of PC is taken into account in EasyConverter to avoid missing data.
12. Allowed screenshot to be saved immediately to the external device.

Drivers
1. [Rockwell EtherNet/IP] Fixed the issue where SINT data type is not correctly read.
2. [Schneider Somachine M Series (Ethernet)] Fixed the issue where the tags not used in
POU cannot be read.
3. [Siemens S7-1200/S7-1500 (S7CommPlus, Symbolic Addressing)(Ethernet)] Added
support for WString data type.
 V6.05.02
4. [Siemens S7-1200/S7-1500 (S7CommPlus, Symbolic Addressing)(Ethernet)] Added
password setting support for PLC.
5. [Mitsubishi FX5U –ASCII Mode (Ethernet)/Binary Mode (Ethernet)] Fixed the issue where
float array addresses are mapped incorrectly after import.
6. [KEYENCE KV-8000 (Symbolic) (Ethernet)] Fixed communication issue.
7. [Dersion FFU Series] Added new driver.
8. [MODBUS Server (Ethernet)] Optimized response behavior in multi-client scenario.
9. [LS XEC FEnet(Ethernet), XGI FEnet(Ethernet)] Expanded address range of I,Q,M,U,F,K
data types.
10. [KOYO CLICK V3 MODBUS TCP/IP] Added new driver.
11. [BACnet/IP] Fixed the issue where data may not be read after long term communication
under COV mode.
 V6.05.02

Software Version：EasyBuilder Pro V6.05.02.434

Corrections
1. Fixed the issue where EasyBuilder Pro allows cMT-FHDX models to set PLC Web Browser
related features. At this moment, PLC Web Browser is not supported on cMT-FHDX.
2. Fixed the issue where Unicode related macro functions (UnicodeCat, UnicodeExcluding,
UnicodeLength, Utf82Unicode) cannot be properly executed on HMI.
3. Fixed the issue where macro may stop abnormally after performing the described
operations: Use GetData() to read data from recipe database and then use Setdata() to
write the data to Tag PLC addresses.
4. Fixed the issue where MQTT topic subscriber under manual operation mode can no
longer handle any data once it has processed a message that does not correctly contain
all keys.

Drivers
1. [KONNEX KNXnet/IP] Added [Support multiple connections] option under Tunneling
mode.
2. [Schneider MODBUS RTU] Added new addresses: %I, %Q, %S, %IW, %QW, %SW, %KW,
%IWS, %QWS, %X, %TM_V, %TM_P, %TM_Q.
3. [XINJE MTX XD/XL Series] Added new driver.
4. [MODBUS Server] Fixed an issue that results in incorrect response to commands with
function code 0x06(write single holding register).
 V6.05.02

Software Version：EasyBuilder Pro V6.05.02.370

Corrections

EasyBuilder Pro

1. Fixed the issue where USB related features do not work properly on cMT-SVR.
2. Fixed the issue where Scheduler does not perform actions at the correct time the first
time after clocks change.
3. Fixed the issue where cMT Viewer cannot display Event Display contents when it connects
to a program that is not created using V6.05.02.

Drivers
1. Added the driver Mitsubishi M80 (Ethernet).
2. CODESYS V3 (Ethernet) Added optimum communication protocols.
 V6.05.02

Software Version：EasyBuilder Pro V6.05.02.354

New Feature
1. Added dynamic file name support for extended memory.

Corrections
1. Fixed the issue where the label’s option, ON=OFF (use state 0), of bit lamp/toggle switch
is ineffective.
2. (cMT2078X/cMT3072X/cMT3072XH) Fixed the issue where event log does not show on
the web page.

Drivers
1. Added the driver CHONG HUI Controlwell MD Series.
 V6.05.02

Software Version：EasyBuilder Pro V6.05.02.327

Corrections
1. (cMT Series HMI, cMT Viewer)
Fixed an issue where the screen display may come to an abnormal halt when an
event with the following condition has been triggered.
Condition: The option [Enable continuous beep until acknowledged or recovered]
for sound is enabled.
 V6.05.02

Software Version: EasyBuilder Pro V6.05.02.307

New Supported Models

cMT2078X, cMT2108X, cMT2158X

Models no longer supported

MT6051iP、MT6071iP、MT6103iP、MT6102iQ、MT6070iE、MT6071iE

New Features

EasyBuilder Pro General Features

Feature Description
1. [Macro] Added built-in macro functions: CEIL, FLOOR, ROUND,

INPORT4.
2. [Macro] Added an (optional) parameter for DATE2ASCII function; the

input argument is a separator that is inserted between the

year, month, day (YYYY MM DD) strings.

iP Series

Added support for the following features (categorized by type).

• Buttons / Lamps • Table
• Combo Button • Data Sampling
• Word Lamp – Bit Combination • Customized File Name
• Numeric Display • Circular Trend Display
• Customized Display Format • Event Log
• Macro Subroutine Scaling • Dynamic Condition
• Charts • Statistics
• Pie Chart • Browser / Viewer
• Dynamic Drawing • File Browser
• Dynamic Scale • Picture View
 V6.05.02
• Recipe Management
• Recipe Database
• Recipe View
• Recipe Import / Export
• System Safety
• Enhanced Security Mode
• Operation Log
• Others
• Flow Block
• Daylight Saving Time
 V6.05.02

cMT / cMT X Series

Feature additions listed in this section are available for cMT / cMT X series models that

support the said features.

Feature Description
1. [Alarm Bar] Added “Option Button Visibility” setting. It provides an
[Alarm Display] option to show/hide the Option Button or to control its
[Event Display] visibility dynamically by a register .
Note: Clicking the Option Button opens the Option dialog.
[Event Bar Chart]

Option Button
2. [File Transfer] Added support for dynamic adjustments of the FTP server
connection parameters.
Note: File Transfer is one of the actions that can be triggered
by Action Trigger / Combo Button.
3. [File Transfer] Added the option [Delete the source file after successful
transfer].
4. [Meter] Added support for visibility setting of the pin point.
5. [System Parameters] Added “Display time for min. press time” settings. Applying
to buttons whose “min. press time” is non zero, it allows a
countdown timer to be shown when buttons are pressed.

Button and the countdown timer

6. [System Parameters] Added “Play next sound after stopping previous” option.
7. [SQL Query] Increased the SQL query command limit to 2000 characters.
8. [Recipe View] Added support for content filter.
 V6.05.02

Recipe View Filter

9. [Enhanced Security Added support for SSL encryption for LDAP mode.
Mode]
10. [System Registers] Added the following system registers related to mounting of
external USB devices.
LW-12492 Last detected USB partition ID
LW-12496 Last detected USB partition size (GB)
LW-12498 Set the partition ID to be used as USB1
LW-12502 Set the partition ID to be used as USB2

The registers may be, for example, used to force an external USB
to mount to a specific location, disk1 or disk 2.
 V6.05.02
All features listed in this section are added on cMT / cMT X series for compatibility with the

behavior of legacy models.

Feature Description
1. [Remote HMI] Increased the maximum allowable to 64.
2. [Option List] Added color setting for the selected row.
3. [Picture View] Added First and Last buttons in the toolbar.
4. [XY Plot] Added picture settings.
[Trend Display]
[Alarm Display]
[Event Display]
[History Data Display]
5. [Media Player] Added [No control] mode.
6. [Video In] Added support for single image capture.
7. [Video In] Added [Use pause control] for the control address. I.e.,
pause command is available.
8. [Alarm Display] Added support for [Scrolling control address] designation.
[Event Display]
9. [Alarm Display] Added support for event acknowledgement by double-click.
[Event Display]
10. [Alarm Display] Added support for event sorting by occurrence count
[Event Display] (real-time mode).
11. [System Parameters] Added the [Enable time synchronization with the external
device when HMI starts] option.
12. [Recipe View] Added support for automatic scrolling to the view that
shows the row specified by the value of RECIPE Selection.
13. [Recipe View] Added color setting for the selected row, for Default style.
14. [Timer(Per-page)] Added support for this object to use timers in individual
windows.
15. [Scheduler] Added support for sound.
16. [Shape] Added support for legacy pattern types (dot and line pattern
types)
17. [System Register] Added support for the following system registers related to
data logs and event logs.
LB-9035 : HMI free space insufficiency alarm
LB-9036 : SD card free space insufficiency alarm
LB-9037 : USB disk 1 free space insufficiency alarm
LB-9038 : USB disk 2 free space insufficiency alarm
LB-9026: delete all data sampling files on HMI memory
 V6.05.02
LB-11950: delete all data sampling files on SD card
LB-11953: delete all data sampling files on USB disk 1
LB-11956: delete all data sampling files on USB disk 2
LB-9034: save event/data sampling to HMI, USB disk, SD card
LB-9023: delete all event log files on HMI memory
LB-11941: delete all event log files on SD card
LB-11944: delete all event log files on USB disk 1
LB-11947: delete all event log files on USB disk 2
LB-9034: save event/data sampling to HMI, USB disk, SD card

cMT X Series

1. Added support for USB2.

IIoT Gateway Series

1. Added support for SQL Query.

cMT Diagnoser

1. Added support for monitoring of tag-based addresses.

2. Added support for monitoring of data in Decimal, Hexadecimal, and Binary formats.

cMT Viewer

1. Added support for connections using non-default ports. The way to use non-default
ports is by entering the offset along with IP address; for example, if offset is 10000,
enter 192.168.1.1:10000 in the IP field. The allowable range of offset is 0~19999. All
ports used will have an offset accordingly.

EasyConverter

1. Added support for integrity check of Operation Log by Command Line Interface.
2. Added support for conversion of data logs and event logs in MS SQL / MySQL database
into CSV files (using Command Line Interface).