Scribd
Upload
74 views

Mod. SW7/EV: PLC Programming, Simulation and Supervision Software

Software mod. SW7/EV is a PLC programming, simulation, and supervision software that can be used offline by simulating a PLC via the software or online by connecting to a PLC training panel. It includes programming languages like AWL, KOP, FUP, and SCL. The software allows testing programs offline before transferring them to an actual PLC. It also provides examples for exercises and enables students to learn PLC programming. The software requires a Windows PC and can optionally connect to a PLC training panel or advanced supervision software.

Uploaded by

lusoegyi 1919
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views

Mod. SW7/EV: PLC Programming, Simulation and Supervision Software

Software mod. SW7/EV is a PLC programming, simulation, and supervision software that can be used offline by simulating a PLC via the software or online by connecting to a PLC training panel. It includes programming languages like AWL, KOP, FUP, and SCL. The software allows testing programs offline before transferring them to an actual PLC. It also provides examples for exercises and enables students to learn PLC programming. The software requires a Windows PC and can optionally connect to a PLC training panel or advanced supervision software.

Uploaded by

lusoegyi 1919
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PLC PROGRAMMING, SIMULATION AND

SUPERVISION SOFTWARE
Mod. SW7/EV

SI
Software mod. SW7/EV is a software of configuration,
programming, simulation, control and diagnostics; it can be
used in OFFLINE mode (PLC simulated via software) or with PLC
trainer mod. PLC-V7/EV.
It offers the availability of a lot of standard libraries concerning:
• Logical combination of bits
• Timers
• Counters
• Comparison operations
• Mathematical functions
• Transfer operations
AUTOMATION TECHNOLOGIES

• Conversion operations
• Logical combination by word
• Shiftment and rotation
• PID Control

It includes the following programming languages: The software block of PLC simulation enables to test the
• Instruction list (AWL) program (OFFLINE) before it is transferred onto the actual
• Contacts (KOP) device. The software is also provided with the following
• Logic (FUP) examples of exercises carried out:
• Graph • Logic gates
• SCL • Function modules
It complies with standard DIN EN 6.1131-3. • Starting an asynchonous motor
The simulation of PLC is managed by a specific software block • Reversal of rotation in an asynchronous motor
included in the program where all the operating modes of an • Star/delta starting of an asynchronous motor
actual PLC are integrated. • Star/delta reversal of rotation
This software enables to create some HMI pages with a basic • Linear position control
library of objects and elements (line, ellipse, circle, I/O field, • Starting a Dahlander motor
pushbutton, bar graph, curves on Cartesian chart, etc…). Installing • Motor with two separate coils
also the (optional) supervision software of advanced level mod. • Starting an asynchronous wound-rotor motor
SV/EV will enrich the library with graphic elements concerning
various sectors (Chemistry, Industry, Building, HVAC etc…).
PC SYSTEM REQUIREMENTS
TRAINING PROGRAM • Processor: Core i5, 2.4 GHz, or equivalent
Software mod. SW7/EV enables students to learn the • Working storage:
programming of PLCs by explaining the theoretical and - 3 GB for 32-bit operating system
experimental analysis of the following exercises: - 8 GB for 64-bit operating system
• Architecture of a PLC, synchronous cycles, asynchronous • Hard disk: 250 GB S-ATA HDD
cycles and cycles with priority • Graphics: min. 1280 x 1024
• Run-time, cycle time and response time • Screen: 15” SXGA + display (1400 x 1050)
• Boolean algebra (NO and NC contact, logical functions) • USB port
• Programming in AWL, KOP, FUP, GRAPH, SCL languages • Ethernet port
26D-E-SI -SW7-0

• Functions of combinational and sequential logic • O.S.: Windows 7 SP1 (32-bit or 64-bit)
• Addressing operations
• Timers & counters
• PID control
• Creation of HMI pages

ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected] SI 5
Offline mode: the PLC is simulated via software
SI

Online mode: the software is connected with the


AUTOMATION TECHNOLOGIES

PLC training panel mod. PLC-V7/EV

SUPPLIED WITH
SOFTWARE PROGRAMMING HANDBOOK ON DVD-ROM
AND CD-ROM WITH EXAMPLES OF PROGRAMMING

OPTIONAL
26D-E-SI

• PLC TRAINING PANEL MOD. PLC-V7/EV


• PLC SUPERVISION SOFTWARE -
ADVANCED LEVEL MOD.SV/EV

SI 6 ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected]

You might also like