PLC TRAINING PANEL

Mod. PLC-V8/EV

Inside a laboratory for automation technologies, the trainer

mod. PLC-V8/EV is the necessary tool for the high level training
of technicians operating in modern process industry, for
installations maintenance and program designing levels. Totally
carried out with industrial components, the trainer PLC-V8/EV
enables the development of a solid experimentation and a high
content of knowledge on PLC programming and the solution of
more complex problems related to automation, with particular
reference to process control with HMI/SCADA software and to
communication in industrial networks.
AUTOMATION TECHNOLOGIES

The PLC installed in the trainer mod. PLC-V8/EV is one of the

most powerful and used in industry. It provides many digital
inputs and outputs accessible by means of terminals of two
diameters (ø 4 mm and ø 2 mm) present on the front panel of
the trainer. The digital outputs are available as relay outputs
or transistor outputs for all those applications which need TRAINING PROGRAM:
quicker timing. The logic state of the digital inputs and outputs
The trainer PLC-V8/EV enables the theoretical analysis and the
is displayed via LED diodes on the PLC. The analog signals
experiments on the following main exercises:
processing allows it to be used within the industrial regulations
• PLC architecture
in closed-loop PID controls. With two rotating potentiometers,
• Instructions processing: the cycle concept
you can adjust the voltages or currents level at the analog
• Synchronous, asynchronous and priority cycles
inputs.
• 2 rotating potentiometers for setting the analog references
In this way, no external power supply is necessary for the • Ø 4 mm and Ø 2 mm standard safety terminals for the
generation of references. connection of I/O to external devices
The front panel of the trainer PLC-V8/EV shows the silk • Communication Protocol: TCP/IP
screen panel of the diagrams and the inner components of • Industrial communication interface: ProfiNet
the equipment, complete with any name. This wide and clear • Performing times, cycle and reaction
vision of the system increases its teaching value, facilitating the • Boolean Algebra
layout of connections and the development of the exercises. A • KOP and FUP basic programming
3 and ½ – digits digital voltmeter displays the voltage across the • Combinational logic functions
analog inputs and outputs according to the position of a rotating • Sequential logic functions
switch. The programming software in WIN 7 Professional (32/64 • Addressing
Bit) enables the development of programs of exercises with • Timers & counters
PLC in the most used languages of industrial automation KOP, • Clock generators
FUP, according to IEC 61131-3 standards. • Monostable and bistable circuits
• Algebra operation: addition, subtraction, multiplication,
The connection between Personal Computer and PLC is
division
made via supplied Ethernet interface. Moreover, the PLC can
• BCD/binary and Binary/BCD conversions
be connected to industrial networks according to ProfiNet
• Integrated functions of fast counting, frequency
protocols. At last, the development of the exercises is guided
measurement, positioning
effectively by the theoretical/experimental handbooks available
• Program Blocs
26D-E-PL-PLCV8-1

with the trainer.

• PID control with auto-tuning
• Interrupt related to internal and external events
• Programming and use of industrial operators panels
• Industrial networks: ProfiNet

PL 9 ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia, 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected]
 Typical application • Output state display: YES (LED diodes)
• Mechatronics modules • Analog inputs: 2 voltage/current
• Range of the analog input voltage: 0..10 Vdc
PID regulations • Range of the analog input current: 0÷20 mA
• Process control (Level, flow, pressure, temperature) • Analog outputs: 1 voltage\current
• Range of the analog output voltage: ±10 Vdc
PLC and PC Communication • Range of the analog output current: 0..20 mA
• Inputs/Outputs diagnosis • Ethernet cable for connection to PC included
• Internal states diagnosis • Single-phase power supply cable
• I/O and internal variables forcing
• PLC networks (Master/Slave)
Power supply: 230 Vac 50 Hz single-phase
(Other voltage and frequency on request)
TECHNICAL SPECIFICATIONS: Dimensions: 415 x 400 x 150 mm
• Tabletop metal box with press-formed aluminium section Net Weight: 10 kg
structure
• Side handles, not protruding, for easy transport in the
laboratory
• Front panel, in insulating material, with silk screen LABORATORY KIT mod. KPLC-8/EV
representation of the diagrams and inner components of the It is also available a laboratory kit consisting of:
equipment - No. 6 PLC trainer panels mod. PLC-V8/EV
• 24 Vdc/2 A power supply for control of the digital inputs and
outputs. With electronic protection against short-circuits and
overloads.
• 24 Vac/2 A power supply relay outputs control with fuse
AUTOMATION TECHNOLOGIES

protection against overloads

• 1 3 and 1/2-digit digital voltmeter for measurement of the
voltage present across the inputs or the analog output 0.1
Vdc resolution.
• 1 Rotating switch for voltmeter input selection
• 2 analog inputs V/I: 0÷10 Vdc, 0÷20 mA
• 1 analog output V/I: ±10 Vdc, 0÷20 mA
• 14 Digital standard inputs of which 6 special for fast counting
• Digital inputs simulator with permanent and pulse state
switches INCLUDED
• 10 24 Vdc digital outputs of which 2 with f=100 kHz pulses PLC PROGRAMMING SOFTWARE
• Safety terminals, standard ø 4 mm and ø 2 mm for connection Software for developing PLC programs using KOP and FUP
of the inputs and outputs to external devices. languages and for creation of basic HMI screens. Windows 7
Professional (32 bit/64 bit) programming environment.
Digital outputs interfacing
• With 10 Aac/2 Adc relay THEORETICAL-EXPERIMENTAL
• Transistor for fast applications HANDBOOK AND APPLICATION GUIDE

PLC characteristics
TECHNICAL HANDBOOK ON DVD WITH
• Power Supply: 24 Vdc CONTROLLER SPECIFICATIONS, OPERATION,
• Hardware clock: YES MAINTENANCE AND COMMUNICATION
• Backup time: 240 h INSTRUCTIONS
• Working record: 50 kbyte
• Data record: 2 Mbyte OPTIONAL
• Speed: 0,1 μs for binary instruction
TOUCHSCREEN OPERATOR PANEL
• Programming interface: TCP/IP • Mod. T8-IOP/EV or, as an alternative
• Network interface: PROFINET • Mod. T7-IOP/EV
• Digital inputs: 14 at 24 Vdc; potential separation; protection
from polarity inversion. Bit, byte, word addressing, from HMI SUPERVISION SOFTWARE Mod. SV/EV
which 6 with fast counting functions Industrial HMI software with graphic pages, suggested for
• Input state display: YES (green LED) supervision and servicing practices when using operator panels.
26D-E-PL-PLCV8-1

Windows 7 Professional (32 bit/64 bit) programming environment.

• Digital outputs: 10 at 24 Vdc/0,5A; galvanic separation
from CPU; immunity against short-circuits. Bit, byte, word
addressing from which 2 with f = 100 kHz pulses
4-PORT RJ45 SWITCH - 24 Vdc Mod. CSM/EV

ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia, 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected] PL 10