Scribd
Upload
917 views

Project Report Format EEE

The document provides guidelines for formatting and structuring a thesis or project report, including: - Order of contents such as title page, declaration, abstract, chapters, references - Paper size, margins, line spacing, fonts - Numbering pages and including a table of contents - Formatting figures, tables, and diagrams - Including a soft copy on a CD-ROM - Styles for references and citing sources in the text - Guidelines for preparing and binding the final thesis

Uploaded by

Vasu Thakur
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
917 views

Project Report Format EEE

The document provides guidelines for formatting and structuring a thesis or project report, including: - Order of contents such as title page, declaration, abstract, chapters, references - Paper size, margins, line spacing, fonts - Numbering pages and including a table of contents - Formatting figures, tables, and diagrams - Including a soft copy on a CD-ROM - Styles for references and citing sources in the text - Guidelines for preparing and binding the final thesis

Uploaded by

Vasu Thakur
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 8

Order of the contents

1. Title page
2. Declaration
3. Certificate
4. Acknowledgement
5. Project Approval Sheet
6. Table of contents with page numbers
7. List of figures with page numbers
8. List of tables with Page numbers
9. List of Abbreviations
10. Abstract
11. Main text
12. Bibliography or list of references
13. Appendices
 
Size: International standard paper size A4 (297x210mm) should be used.
 
Page number: Page should be numbered consecutively and clearly. No page number
should be indicated on title page, supervisors certificates, declaration and
acknowledgement, however pages are to counted from title page. From title page to
abstract page Greek numbers should be used. From main text to end of thesis Indian
numerals should be used. All typing should be on right hand pages only.
 
Margin: Top 1.0”, Bottom 1.0” Left 1.5” Right 1.0”
 
Line spacing: 1.5
 
Font: Times new roman, size 12/14 for text, larger fonts may be used for headings &
subheadings.
 
Folded diagram/charts: These should be arranged so as to open to the top and right.
 
Landscape chart/ fig: Bottom of chart/ fig should be on right side.
 
CD-ROM: All thesis/ report should include soft copy on CD-ROM accompanied with
thesis/report in pocket pasted on inside of back cover.
 
Text: Before producing the final copies of a thesis/project report the candidate should
ensure that all the spelling, grammar, punctuation and bibliography is complete and
exact.
 
 
Title Page
 
 
TITLE OF THE PROJECT
 
 
A Project Report submitted in partial fulfillment of the
requirement for the degree of
  
Degree of Bachelor of Technology
In
Electrical & Electronics Engineering
Under the Supervision of
XYZ
(Assistant Professor)

By
ABC
(University Roll Nos.)

To

Head of the Department


(Electrical & Electronics Engineering)

Dev Bhoomi Institute of Technology


Dehradun Uttarakhand-24008
 
May 2020
 
 
DECLARATION
 

This is to certify that Thesis/Report entitled “…………………………”which is submitted by


in partial fulfillment of the requirement for the award of degree B.Tech. in Electrical &
Electronics Engineering to Dev Bhoomi Institute of Technology Dehradun, UTU Dehradun
Uttarakhand comprises only my original work and due acknowledgement has been made in the
text to all other material used.
 
 
 
Date: Name of Student
 
 

 
APPROVED BY

Head of the Department


 

 
Certificate

 This is to certify that thesis/Report entitled “…………………….” which is submitted by


………………………… in partial fulfillment of the requirement for the award of degree B.Tech.
Electrical & Electronics Engineering to Dev Bhoomi Institute of Technology Dehradun, UTU
Dehradun Uttarakhand is a record of the candidate own work carried out by him under my/our
supervision. The matter embodied in this thesis is original and has not been submitted for the award
of any other degree.
 
 
Date: Supervisor
 
 
ACKNOWLEDGEMENT

I would like to take this opportunity to express my deep sense of gratitude to all who

helped me directly or indirectly during this thesis work.

First of all, I would like to express my deepest gratitude to my thesis supervisor,

(ABC) for his enormous help and advice and for providing inspiration which can not be

expressed with words. I would not have accomplished this thesis without his patient care,

understanding and encouragement. His advice, encouragement and critics are source of

innovative ideas, inspiration and causes behind the successful completion of this thesis work.

The confidence shown on me by him was the biggest source of inspiration for me.

I would like to express my deep gratitude to Head of Department of Electrical &

Electronics Engineering at Dev Bhoomi institute of Technology, for providing access to the

good integration of intellectual properties, technical support and facilities.

I am deeply thankful to DBIT Management for providing facilities for

accomplishment of this dissertation

Date:
Name
Roll Number
PROJECT APPROVAL SHEET

This is to certify that the dissertation titled

“Title of the Thesis/Report”

By

XYZ

is approved for the degree of Bachelor of Technology.

Guide Name & Signature

Internal examiner name & Signature

External Examiner Name & Signature

Date:
TABLE OF CONTENTS
Declaration
Certificate
Acknowledgement
Project Approval Sheet
List of Figures
List of Tables
List of Abbreviations
Abstract

Chapter 1

Chapter 2
----

References
Appendices
A.
B.
Abstract: An abstract should be 300-500 words in English.
 
Main Text: Candidate are strongly advised to discuss with their supervisor the style
of writing of the thesis/project report before writing begins. The Stages of
investigation and writing are likely to be according to the nature of the
subject and should be worked out in consultation with supervisor.
However the text should be divided in the chapters and each chapter,
headings and subheadings should be numbered like x.y.z.A.B….. where x
stands for chapter number y stands for headings and z,A,B.. etc stands for
subsequent subheadings. Chapter heading should be edited at center
while heading and subheadings should be edited at left. There should be
separated uniformity in headings and subheadings. Main chapter heading
should be in capital letters. Each paragraph should be started from the
next line of heading and subheadings. The general guidelines for chapters
are as follows, references should be quoted by authors name or by S.No.
 
 
 
Reference: All the references should be arranged alphabetically or serially as the
case may be for quoting in text.
 
 
For Journals:
Kerr, G.T. : Chemistry of Crystalline Aluminositicate; The J. Phy. Chem.,
April 1968, vol.73, no.3 pp1385-1386.
 
Garside, J. et-al; Industrial crystallization from solution; Chem.. Engg.
Sci., 1985, vol. 40, no.2, pp. 3-26.
 
For books:
MeCabe and Smith; Unit Operations in Chemical Engg., 4th ed., TMH,
pp.812-814.
 

Thesis/project report preparation & binding;


 
Thesis/reports should normally be bound using temporary binding to facilitate the
incorporation of amendments which might be required by the examiners. After
examination thesis should be hard bound to resist damage or knocking. Twing-ring,
spring-back and spiral binders are not acceptable, as thesis bound in these ways
frequently do not survive longer.

You might also like