Scribd
Upload
3K views

Smaw Assessment Question

The document contains 15 questions about shielded metal arc welding (SMAW) asking about how to prevent issues like porosities, warping, and cracking during the welding process. It asks about welding parameters that produce quality welds, the ideal arc length, causes of poor penetration and fusion, what stress relieving is and why it's performed, advantages of the SMAW process, and factors to consider in electrode selection.

Uploaded by

SuzetteBragaSamuela
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views

Smaw Assessment Question

The document contains 15 questions about shielded metal arc welding (SMAW) asking about how to prevent issues like porosities, warping, and cracking during the welding process. It asks about welding parameters that produce quality welds, the ideal arc length, causes of poor penetration and fusion, what stress relieving is and why it's performed, advantages of the SMAW process, and factors to consider in electrode selection.

Uploaded by

SuzetteBragaSamuela
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Libon Agro- Industrial high School

Libon Albay

Shielded metal arc welding


(SMAW) – 12

SMAW ASSESSMENT
1. High wind velocity can cause porosities in weld. What must be done to prevent this from
happening?

2. What are the welding parameters that must be considered to produce quality weld?

3. What is the ideal length of arc? What is the affect to long arc/

4. What is the affect on the weld if the electrode is held to closely to the material being welded?

5. How would you prevent Welding related injuries?

6. How would you avoid electric shock during welding related injuries?

7. What should be done to prevent warpage or distortion?

8. What causes warpage distortion?

9. What causes of poor penetration and incomplete fusion?

10. What is stress- relieving and why it is performed?

11. What is back step welding and why is this technique applied/
12. How would you prevent the occurrence of slag inclusion and undercut?

13. What are the advantages of SMAW process?

14. Weld thick carbon steel materials has tendency to crack, Why?

15. What factors must be considered in the selection of electrodes/

You might also like