Scribd
Upload
56 views3 pages

Monitor The Incoming Paging in GSM

The document discusses paging groups in GSM networks. Paging groups allow mobile stations to monitor incoming pages only during specific times, allowing them to sleep and conserve battery at other times. Mobile stations will only monitor pages when the paging group assigned to that station is transmitted. Paging blocks consist of 4 time slots over 4 frames and can be used to page 4, 3, or 2 users depending on whether IMSI or TMSI identifiers are used. Groups of users in the same paging block are referred to as a paging group.

Uploaded by

SamehTaresh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views3 pages

Monitor The Incoming Paging in GSM

The document discusses paging groups in GSM networks. Paging groups allow mobile stations to monitor incoming pages only during specific times, allowing them to sleep and conserve battery at other times. Mobile stations will only monitor pages when the paging group assigned to that station is transmitted. Paging blocks consist of 4 time slots over 4 frames and can be used to page 4, 3, or 2 users depending on whether IMSI or TMSI identifiers are used. Groups of users in the same paging block are referred to as a paging group.

Uploaded by

SamehTaresh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TelecomStudy18

Monitor the Incoming Paging in GSM


-
July 05, 2015

Paging Groups
−The MS will monitor the incoming paging in only specific
times,
and the rest of the time it will remain in sleeping mode.
−In this way we save the MS battery and we decrease the UL
interference on the system.
−The MS will monitor the incoming paging when the “Paging
Group” assigned for this MS is transmitted only.
−The CCCH block can be used by either PCH or AGCH.
−When the CCCH block is used for paging it will be called
“Paging
Block”
−The Paging Block consists of 4 consecutive Time slots lie
in 4
consecutive frames.
−The Paging Block can be used to page 4/3/2 users according
to IMSI
or TMSI is used when paging the MS ( Length IMSI = 2 TS, Length
TMSI =
1 TS)

−The group of users belong to the


same paging block will be called
“Paging Group” 

GSM

Post a Comment

Popular posts from this blog


Troubleshooting for GSM KPIs (SD Block & SD Drop)
-
April 24, 2015

KPIs to be monitored: ·             SD Blocking ·             SD Drop SDCCH


Channel: ·    SDCCH channel is a dedicated channel which is using for
LAC updation, Call Setup, SMS in Ideal mode. It works in UL & DL SD …

READ MORE

Ericsson 2G OSS Command


-
October 10, 2014

Command Description RLDHP:CELL=ALL; CELL DYNAMIC HR


ALLOCATION DATA DBTSP:TAB=AXEPARS; DATABASE TABLE FILE
PRINTOUT STATUS PLLDP; PROCESSOR LOAD DATA RAEPP:ID=ALL; …

READ MORE

RXLEV in GSM
-
April 06, 2014

RXLEV is a number from 0 to 63 that corresponds to a


dBm value range. 0 represents the weakest signal and
63 the strongest   RSSI below -110 dBm are generally …

READ MORE


Powered by Blogger

Theme images by Michael Elkan

Archive
Labels

Search Postal Code


https://www.countryzipcode.com

You might also like