HD Mediabox Quickstart Guide Eng
HD Mediabox Quickstart Guide Eng
INSTALLATION
E HDMI cable
F Network cable
3. Plug Mediabox into cable TV socket
With the help of the coaxial cable G plug the HD Mediabox A into the cable
TV socket (see diagram below in this instruction). Make sure that both ends are
connected properly.
TYPE 2
4
TYPE 3 Choose one of the options of energy
consumption. Press OK for Fast Start
(RECOMMENDED), which will ensure you a
H quick launch of Mediabox and watching TV
within 5 seconds. Press the back button for
ECO mode to reduce energy consumption
when Mediabox is switched off. In the ECO
mode, the launch takes longer (over 1 minute).
Find more information on energy consumption
in the Q&A section further in this manual.
Rear side of Use arrows (Up/Down) on your remote control
modem
to choose a language and press OK.
G 5
F 8
Read through the given terms and press OK After installation, the main menu will appear.
when the I AGREE field is active.
4. Pairing remote control with TV 5. Questions and answers
If you want to control the HD Mediabox and your TV with one device, follow the What to do if my HD Mediabox does not load after the first plug-in?
instructions below: If the HD Mediabox does not load within 10 minutes, disconnect the power cable for 10 seconds.
This will restart the HD Mediabox. The HD Mediabox should load after plugging it in again.
Your TV and HD Mediabox have to be turned on How can I activate and use the replay TV broadcasting?
The activation of Replay TV is described in the user manual of HD Mediabox, all it takes is to confirm the
P oint the HD Mediabox remote control towards the HD Mediabox and press the TV request for recording of shows for your own needs. The window with the request will appear when you
button on the remote control first play an already aired show. Please note that the broadcasting will start recording in the moment of
activation, i.e. you cannot rewind TV broadcasting on the day of activation.
T hen press and hold the OK button and the red button at the same time, until the If you want to play an already aired show, go to the TV guide and pick a show with arrows on your
TV button blinks twice (in red) remote control. Press OK and confirm PLAY FROM THE BEGINNING.
ith the help of numerical keyboard on the remote control type in the code
W How can I use Video Library and Apps?
of your TV All interactive features are available after connecting the HD Mediabox to a UPC modem. You can
connect those devices with an Ethernet cable that is included in the self.installation package. More
Below are codes for the most common TV brands in the Czech and Slovak Republic: information is given in the user manual.
How can I record films and other shows on the HD Mediabox? How can I play them afterwards?
2081, 0842, 4178, 4005, 0648, 2124, 1488, 4126, 2167, 4180, 1660, 1342, 1279, 0617, 1649, 3194,
Samsung 3988, 0067, 0586 You need to connect the HD Mediabox with an external hard drive to be able to record and play TV
shows. You can find the requirements for the storage medium and information on connection on the
LG 2212, 4427, 4047, 1335, 1453, 4116, 4149, 4394, 1872, 0744, 3971, 0067, 1682, 1179, 0586, 2970 next page of this guide.
Sony 2808, 1855, 4181, 1581, 0681, 1681, 1655, 2615, 3721, 1535, 1781, 1040 To record a show, enter the TV guide and pick a show that will be aired. Press the REC button on your
remote control.
Toshiba 1538, 3705, 2805, 2628, 2706, 2762, 2822, 0538, 3749, 0648, 1682, 2138, 0680, 1067, 0225, 1946
To play your recorded shows or to see the scheduled recordings, enter the main menu and go to the
Panasonic 1666, 1680, 1998, 0680, 4531, 3749 LIBRARY section.
2830, 1917, 3644, 4241, 0586, 4238, 1536, 0067, 0669, 2690, 3708, 2843, 1774, 0635, 3016, 1828,
Philips 1525, 3394, 1897, 2738, 2404, 2970, 3820, 2831
How to set up the HD Mediabox if it is connected to the TV with a SCART cable?
If your HD Mediabox is connected to your TV with a SCART cable, not all text fields must be displayed
Sharp 2981, 1689, 3317, 2390, 1616, 2706, 0123, 3820, 3338, 3749, 3381, 2244, 3826
correctly. Therefore you need to optimize the HD Mediabox in the main menu through: TOOLS –
Thomson 0655, 3077, 2705, 0590, 3809, 3679, 4001, 1618, 2745 ADVANCED SETTINGS – OPTIMIZE FOR HDMI – SCART.
How can I influence the speed of HD Mediabox launch, and thus also energy consumption?
It is necessary to try all the codes for the given brand of TV. If you did not find your TV here, additional codes are HD Mediabox offers two options of energy consumption in standby mode, which influences the speed
indicated at www.upc.cz .
of the switching on of the device (MAIN MENU – SETTINGS – FAVORITES – STANDBY MODE).
The pairing will take place in the moment of the TV button blinking twice (in red) 1) QUICK START – RECOMMENDED
HD Mediabox will enter operating mode almost immediately. The energy consumption is higher in this mode.
P ress the button TV off / on. If the TV switches itself off, check other functions 2) ECO
(e.g. sound, channel switching). If everything works, the pairing was completed In the ECO mode, HD Mediabox will switch from standby mode to operating mode after a couple of
successfully seconds. The relaunch takes longer. Energy consumption in this mode is lower.
If the TV does not switch itself off, try typing in another code that is indicated with the TV
device (begin with the second step above).
6. Always something more – recording
TV broadcasting
Capacity between 160 and 500 GB. We do not recommend a hard drive with a higher
capacity. Proper function could not be ensured because of insufficient power supply.
Connect the hard drive into the USB on the rear side of the HD Mediabox. You need
to format the hard drive before the first use. To format the hard drive, press MENU,
then SETTINGS, ADDITIONAL SETTINGS, HORIZON MEDIABOX and FORMAT DISC.
Warning: When formatting a hard drive, all saved files will be permanently deleted.
You can find detailed information on HD Mediabox setup in the detailed manual
on www.upc.cz.
Households:
www.upc.cz/pece-o-zakazniky
or on client service number 241 005 100
Enterpreneurs:
http://business.upc.cz/zivnostnici-podnikatele/
or on client service number 241 005 200