0% found this document useful (0 votes)
74 views

Gate IP / DP: Key Features

The Q.gate IP/DP test controller can connect to up to 32 measurement modules via two high-speed UARTs and synchronize and record measurements from up to 256 variables. It has an Ethernet interface for configuration, data output, and optional Profibus-DP fieldbus interface. The test controller provides data buffering, FTP server/client functionality, and supports high data rates over Ethernet. Programming of control functions is done through the graphical test.con tool.

Uploaded by

Hammad Hussain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
74 views

Gate IP / DP: Key Features

The Q.gate IP/DP test controller can connect to up to 32 measurement modules via two high-speed UARTs and synchronize and record measurements from up to 256 variables. It has an Ethernet interface for configuration, data output, and optional Profibus-DP fieldbus interface. The test controller provides data buffering, FTP server/client functionality, and supports high data rates over Ethernet. Programming of control functions is done through the graphical test.con tool.

Uploaded by

Hammad Hussain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Q.

gate IP / DP Test Controller

Key Features:
 Connection of up to 32 Q.bloxx modules
via 2 UARTS, Baud rate up to 24 MBaud each UART
Recording of up to 256 variables (real format 4 Byte)

 Synchronization and time stamp of measurement values


IRIG based master slave principle on RS485 standard
DCF77, AFNOR etc, GPS time and position data, SNTP over
Ethernet

 Ethernet interface for configuration and data output


FTP, TCP/IP, UDP
optional fieldbus interface Profibus-DP, 12 Mbps

 FTP Server and FTP Client functionality


configurable function

The Q.series has been designed for the demanding measurements  High data rate over Ethernet
found in today’s industrial measuring and testing environments. 128 real variables with 1 kHz (block transfer)
Applications range from single, stand-alone solutions to networked, 16 real variables with 10 kHz (block transfer)
multi-channel systems in real-world areas such as component 64 real variables with 300 Hz (online)
testing, engine testing, process performance testing, materials
testing, and structural monitoring.  Data buffer memory 16 MByte
Data buffer at block transfer of measurements,
The range and flexibility of the modules allows for an optimized different logger possibilities, extendable by USB device
solution for each and every measurement and control point:
 PAC functionality
 Dynamic signal acquisition up to 100 kHz per channel Sequences, data logger, PID-controller, transfer functions,
 inputs and outputs for all types of signals and sensors mathematic, numeric, Boolean combinations, functions generator
 Galvanic isolation (up to 1200V) of inputs and outputs
 Galvanic isolation
 Multi-channel, High-density packaging
of power supply and interfaces
 Intelligent signal conditioning on every channel.
 Electromagnetic Compatibility
All modules connect to a Q.series test controller (Q.gate, Q.pac or according EN 61000-4 and EN 55011
Q.station) for synchronization and buffering, and data exchange
between the test controller and automation system is handled via  Power supply 10…30 VDC
Ethernet TCP/IP , EtherCAT, Profibus-DP, CANopen, or through
 DIN rail mounting (EN 60715)
additional industrial fieldbus standards.

Ethernet
TCP / IP

Gantner Instruments Incorporated  www.gantnerinstruments.com  [email protected]


9835 Carroll Centre Road, Suite 100 Toll Free: (877) 725-6997 (877 QBLOXXS) Toll Free Fax: (800) 303-9381
San Diego, CA 92126 USA Direct: (858) 537-2060 Direct Fax: (858) 537-2064
Q.gate IP / DP Test Controller

Host Interface Ethernet


Protocols TCP/IP, UDP, PING, ASCII, Modbus TCP/IP
Services DHCP, FTP-Server, FTP-Client, e-Mail-Send-Client (SMTP)
Baud rate 10/100 Mbps
Data rate max. 800 kByte/s
Number of simult. Clients 10
Isolation voltage 500 V

Host Interface Profibus-DP (Q.gate DP only)


Standard RS 485
Data format 8E1
Baud rate 9.6 kbps up to 12 Mbps
Connectable devices max. 32 without, max. 127 with repeater
Isolation voltage 500 V

Host Interface USB


Version USB 2.0
Data rate typ. 100 kByte/s
Devices Data storage, formatted with FAT or FAT 32

Slave Interfaces RS 485


Number of interfaces 2
Standard RS 485
Data format 8E1
Protocol Local Bus
Baud rate 9,6 kbps up to 24 Mbps
Connectable devices max. 16 modules at one UART line
Isolation voltage 500 V

Data Memory
RAM 16 MByte (optional 90 MByte), cycle buffer
Flash 128 MByte

Synchronization of a Multi Test Controller System


Interface RS485 Standard

Mode Master Slave principle, IRIG standard

DCF77, AFNOR etc, GPS over IRIG standard

GPS NMEA over RS232

SNTP over Ethernet

Gantner Instruments Incorporated  www.gantnerinstruments.com  [email protected]


9835 Carroll Centre Road, Suite 100 Toll Free: (877) 725-6997 (877 QBLOXXS) Toll Free Fax: (800) 303-9381
San Diego, CA 92126 USA Direct: (858) 537-2060 Direct Fax: (858) 537-2064
Q.gate IP / DP Test Controller

Operating System Independent


Standardized interface Ethernet (FTP/Berkeley-Socket)

Power Supply
Power supply 10 up to 30 VDC, over voltage and overload protection
Power consumption approx. 3 W

Environmental
Operating temperature -20°C up to +60°C
Storage temperature -40°C up to +85°C
Relative humidity 5 % up to 95 % at 50°C, non condensing

Mechanical
Case Aluminum and ABS
Dimensions (W x H x D) (27 x 120 x 125) mm
Weight approx. 250 g
Mounting DIN EN-rail

PAC Functionality
Cycle time ≥1 ms

Processing cyclic or synchronized with data acquisition

Gantner Instruments Incorporated  www.gantnerinstruments.com  [email protected]


9835 Carroll Centre Road, Suite 100 Toll Free: (877) 725-6997 (877 QBLOXXS) Toll Free Fax: (800) 303-9381
San Diego, CA 92126 USA Direct: (858) 537-2060 Direct Fax: (858) 537-2064
Q.gate IP / DP Test Controller

Programming Tool test.con

Using test.con for programming of the PAC-function in a graphical way:

Valid from March 2012. Specification subject to change without notice


gantner-q.gate-ip-ec-dp.pdf (Version 0616)

Gantner Instruments Incorporated  www.gantnerinstruments.com  [email protected]


9835 Carroll Centre Road, Suite 100 Toll Free: (877) 725-6997 (877 QBLOXXS) Toll Free Fax: (800) 303-9381
San Diego, CA 92126 USA Direct: (858) 537-2060 Direct Fax: (858) 537-2064

You might also like