BACKHOE LOADERS

B100 C I B110 C I B115 C

02 THE RANGE
 03

Right for your needs.

Many business operations will have a need for a loader that
offers the versatility to do a lot more than just move bulk
material. Typical alternative applications will include grading
and levelling, the ability to grab heavy items such as trunks and
concreate pillars plus a tractor unit with the traction and power
to push materials or items into place or out of the way.
With a 4 in 1 bucket, a backhoe loader will deliver this exceptional
performance with just the one attachment. Choose a 6in1 bucket
and you have the option to flip down adjustable pallet forks, ideal
for handling palletised loads without the need for a dedicated
vehicle.
The backhoe can be equipped with a wide choice of buckets to
match excavation, water course clearance, trenching and other
demands. Post hole borers, hydraulic hammers and countless
other tools can all be fitted. The long reach of both the standard
and telescopic dipper, up to a massive 6965mm, allows long
reach and digging depth comparable to many conventional
dedicated excavators. Add to this the new revised cab featuring a
new heated seat and up to ten LED lights and exterior side lights
on the cab roof, there are no performance compromises with a
New Holland backhoe loader.

Models Engine Loader lift capacity Max. backhoe Hydraulic

power Straight/Tool Carrier reach flow
(hp) (kg) (mm) (l/min)
B100 C 98 3550/3450 6965 151/165
B110 C 111 3550/3450 6965 151/165
B115 C 111 3380 6965 165
04 OVERVIEW

Mechanical or
pilot-hydraulic

In-built versatility.
backhoe control

New Holland backhoe loaders are your versatile choice for

loading, grading, grabbing, lifting, excavating, digging, planting,
post hole boring and, well the list goes on. Businesses from
agriculture through to horticulture, landscaping through
to drainage and irrigation need versatile and cost effective
equipment. With a backhoe loader there are loader and backhoe
specification choices. The all-wheel steer B115 C boasts powerful
performance in challenging conditions with no compromise on
agility. Entry level B100 C models are affordable but come with
a high standard specification to suit a wide range of needs.
Available through selected New Holland Agriculture dealers, the
latest C series backhoe loader is one investment that will never
be short of work.

Heated seat

Fixed or extendable
backhoe dipper

Backhoe craning
capacity up to 1423kg

Fixed or side-shift
backhoe

Four-wheel drive
standard with selectable
two-wheel drive
Mechanical Powershuttle
or Automatic PowerShift™
transmission
 05

Up x10 LED
work lights
Class leading in-cab
noise levels matched
to proven New Holland
ergonomics

Excellent all-round
visibility

Tier 4B F5H 3.4 litre

four-cylinder engine

TC Tool Carrier
front loader

Three steering
modes on equal Up to 3.5 tonnes
wheel B115 C lifting capacity
06 OPERATOR ENVIRONMENT

Welcome aboard.
A good cab will offer good operator comfort, excellent ergonomics and plenty of room to speed switching between loader and backhoe
operation. A great cab will combine this with excellent all-round visibility, first class heating and ventilation with low noise and
vibration levels.
With the newly refreshed cab on New Holland backhoe loaders, you get all the small additional details that make the cab extra special.
Room for tools and oddments as well as personal items. A high grip floor covering to help prevent the operator slipping when entering
with muddy footwear. A powerful lighting package featuring up to ten optional LED lights giving true 360 degree light pattern thanks
to the roof mounted side lights. Large retractable sunshades, cup holders, glove box and a deluxe pneumatic heated seat. To top it
off, the engine exhaust pipe has been relocated to the right side of the cab to provide a clear view of the loader arm.

• Improved in-cab storage

• Spacious cab allows easy seat transition to operate the backhoe • Good visibility is a key design priority, C series backhoe loaders
• A choice of entry level mechanical and deluxe heated pneumatic benefitting from extremely slim cab pillars, front and rear
suspension seats are available
• Low 77dB(A) in-cab noise level
 07

• A pillar exhaust mount for • Key controls mounted on side to allow operation from both forward and backhoe seat positions
clear view of loader • Uncluttered side console housing all necessary buttons
• The dashboard is easy to read with the seat in either its forward or reverse position

• Single multifunction proportional • Powerful heating and ventilation with • Up to ten LED work lights including roof
control lever for all loader controls standard air conditioning ensures mounted side lights are available
• 4 in 1 or 6 in 1 bucket opening, diff lock operator comfort throughout the day
and transmission de-clutch functions
are also activated from the lever

• Backhoe joystick towers adjust in all directions for the most • Up and over rear window, light and easy to open and close
comfortable position
08 AXLES AND TRANSMISSION

PowerShift™ or Powershuttle, you decide.

New Holland offers its backhoe loaders with switchable two or four wheel drive, a Powershuttle forward / reverse mechanical
transmission or automatic PowerShift™ transmission. The all-wheel steer B115 C has equal size front and rear wheels with selectable
front, all-wheel and crab steer modes.

The right front axle for the job The right rear axle for the job
• The heavy duty front axle on B100 C and • The rear axle on all two-wheel steer models is fitted with a fully locking rear differential,
B110 C models has an open differential engaged via a button on the loader joystick
• A tight turn radius can be maintained in
all conditions
 09

Mechanical four-speed Powershuttle Automatic four-speed PowerShift™

• Floor mounted gear lever with steering column mounted • Steering column mounted lever for shuttle and speed
electro–hydraulic forward / reverse shuttle selection
• Four gears with transmission de-clutch button incorporated • Fully modulated gear shifting with speed matched forward
in the gear lever and reverse
• Affordable, dependable and easy to use • Ease of use matched to low maintenance demand
• Ideal choice where the backhoe will see more use than front • Ideal transmission choice for extensive front loader duties
loader • Loader joystick fitted with transmission de-clutch button to
divert full power to hydraulics as required
• Selectable two or four-wheel drive

Two wheel steering Four-wheel steering Crab steering

Four-wheel steer B115 C

New Holland B115 C models can be operated in one of three steering modes:
• Conventional front-wheel steering is ideal for normal loading and transport applications
• All-wheel steer delivers excellent manoeuvrability with no impact upon stability
• Crab steer is ideal for working up close to a trench or obstacle and can be useful when working over sensitive terrain to reduce
trafficking
• The all-wheel steer B115 C delivers excellent traction with limited slip differentials in both the front and rear axles. Power is
automatically diverted to all wheels in adverse conditions with no need for any operator input
• Self-adjusting, the oil immersed disc brakes are designed to offer dependable performance. Mounted within the reduction hubs,
the brakes can be easily serviced with no need to strip the axle
10 LOADER AND BACKHOE

The figures tell you everything.

With a New Holland backhoe loader, there is no compromise B100C
Models B115C TC
in performance. Dependent upon model, the front loader can B110C TC
be fitted with a front bucket of either 0.9m3, 1.0m3 or 1.15m³ Loader specifications Tool Carrier Tool Carrier
capacity and raise loads of 3380kg - 3550kg to heights of up to Lift capacity (kg) 3450 3380
3520mm. Hinge pin height (mm) 3460 3520
The backhoe has a digging depth down to 4665mm increasing
B100C - B110C -
up to 5880mm with the telescopic dipper. The bucket breakout Models B100C
B115C
force is as high as 5970daN, the dipper breakout coming Backhoe specifications Short Extended Long Extended
in at 3225daN or 2390daN if extended. With a New Holland
Digging depth (mm) 4385 5625 4665 5880
backhoe loader there is absolutely no compromise in
Max. bucket breakout force (daN) 5970 5970 5970 5970
performance.
Max. reach (mm) 5580 6315 5830 6965

Front loader - TC Tool Carrier loader designs

TC Tool Carrier loader arm features:
• Mechanical parallel lift and lower
• Greater reach than straight arm
• Ideal for pallet and loading duties

Common standard loader features

• Auto-glide loader suspension
- automatically activates / deactivates at speeds
above / below 9.2kph / 7.6kph
- improves material retention over uneven terrain
- enables faster load cycle times
- higher travel speeds for reduced journey times
• Return to dig and float modes
• Choice of standard, 4 in 1 or 6 in 1 buckets
• All buckets have bolt-on teeth for easy renewal

Versatile bucket options

• Versatile 4 in 1 bucket is suitable for work to include dozing
and grading, bulk materials handling and work as a grab
• The 6 in 1 design adds adjustable forks for pallet work, lifting
open loads and working with a strop
 11

Backhoe
Standard features include:
• Curved arm design for easier loading over trailer sides and obstacles
• Long life pivots with ground level greasing points
• Wide pad stabilisers with adjustable footing
• Powerful bucket and dipper breakout for optimum performance
Key backhoe specification choices include:
• Fixed or extendable dipper arm option
- fixed dipper offers 4710mm dig depth
- telescopic dipper extends dig depth to 5785mm
• Fixed centre or hydraulic side shift option
• Direct fit or quick coupler bucket choice
• Object Handling kit available. EU certified to allow handling
of suspended items

• Conventional pilot controls for the backhoe provide good

feedback and response from the hydraulics

• With full proportional control, pilot backhoe control joysticks

are fully adjustable
• Selectable ISO or SAE operating patterns

• Object Handling kit adds lifting hook, safety valves to both boom and dipper and overload protection

• Hydraulic side shift allows precise backhoe positioning

and enables the operator to optimise bucket visibility when
excavating a trench or working alongside an obstacle
12 HYDRAULICS

Hydraulics to meet
every demand.
To exactly match end user needs, New Holland backhoe loaders are offered with a choice of
hydraulic pump designs. In addition, an auxiliary hydraulic circuit is available to power attachments
to include hydraulic breakers and soil augers.
Two hydraulic pump designs are offered:

Twin gear pump Variable displacement pump

• Simple • Only active when there is a demand for oil
• Constant flow • Flow rate proportional to demand
• Fast warm up • Reduces fuel consumption
• Straightforward service and maintenance • Reduced oil temperature due to flow on
• For general use. Suits applications with demand
limited roading • Ideal for intensive backhoe operation and
• Maximum flow 151l/min @ 2200rpm frequent roading
• Maximum operating pressure 205bar • Variable flow from 6 to 165l/min
• Maximum operating pressure 205bar

• A variable displacement hydraulic pump only delivers flow on demand, saving fuel when roading and in applications such as dozing
and grading
 13

• An optional auxiliary hydraulic circuit delivers 0-135l/min

• Ideally suited to working soil augers, large grabs and hydraulic breakers
14 ENGINE AND CHASSIS

Powerful economy.
Developing 98, 111hp dependent upon model, the FPT Industrial F5H 3.4 litre four-cylinder engine in backhoe loaders is the same
unit proven in New Holland T5 tractors. Complaint with stringent Tier 4B emission regulations, the engines have an advanced
throttle control system. This allows the operator to adjust how the engine responds to throttle inputs from smooth to fast.

Powered by FPT Industrial

New Holland are not going it alone when it comes to Tier 4 technology, they can draw on the experience of their in-house engine
development specialist: FPT Industrial.
Pioneers: Common Rail technology developed by FPT Industrial at their R&D excellence center in Arbon, Switzerland in the 1980s
and brought it to the masses in 1997 on the Alfa Romeo 156. They were the very first to introduce it on agricultural machines on
the TS-A tractor. Pioneering. Always.
Cleaner: For the eighth consecutive year, CNH Industrial has topped the Dow Jones Sustainability World and Europe Indexes for
the Industrial Engineering sector. Cleaner. Everywhere.
Proven: FPT Industrial has pioneered SCR technology since 1995 and has already produced over 1 million SCR engines during the
last eight years for the agricultural, construction and haulage industries. Reliability. Confirmed.
 15

Compact HI-eSCR after-treatment emission system

New Holland sister company FPT Industrial developed the F5H
engine to meet tough emission regulations without the need
for a Diesel Particulate Filter. By combining proven Selective
Catalytic Conversion with exhaust gas recirculation, an F5H
engine can be operated at low loads for an extended period
without needing to regenerate a blocking a DPF filter.

• Output choice of 98 and 111hp

• New side mounted for exhaust stack for improved visibility
• Engine shut-down protection in the event of low oil pressure
plus high coolant or transmission oil temperatures
• 132 litres fuel and 42 litre AdBlue capacity
• Three throttle settings, soft, normal and fast are offered. The
operator can select the throttle setting best suited to the
application

600

500

More time working

Hours

• 600hr* engine service intervals

F5H engine Competitors

* when AMBRA UNITEK engine oil is used only

Chassis
All backhoe models benefit from a full frame chassis, its exceptional
strength diverting all stress through the robust frame with no load
on the engine or transmission.
• Robot welded full length frame chassis
• No stress on engine or transmission
• Plate reinforced stress points
• Cast backhoe slider interface
• Open design to facilitate maintenance
16 SERVICE AND BEYOND THE PRODUCT

Spend time saving money.

A key to equipment performance and longevity is routine care. New Holland has designed the backhoe loader so it takes the minimum of
time to carry out routine checks. Service intervals are also fixed at 600 and 1000 hours, with easy access to all key fuel, engine, transmission
and hydraulic filters. Extensive New Holland dealer network for full support is always handy.

• One piece hood for full engine access • Battery disconnect and remote jump start terminals easily
• All key daily checks grouped together accessible

• All key lubrication points on the loader and backhoe have ground level access
• Making key service items accessible from ground level makes the job simpler, faster and safer
• Maintenance free disc brakes are standard
 17

New Holland Services.

Finance tailored to your business Trained to give you the best support
CNH Industrial Capital, the financial services company of Your dedicated New Holland dealer technicians receive regular
New Holland, is well established and respected within the training updates. These are carried out both through on-line
agricultural sector. Advice and finance packages tailored to courses as well as intensive classroom sessions. This advanced
your specific needs are available. With CNH Industrial Capital, approach ensures your dealer will always have the skills
you have the peace of mind that comes from dealing with a needed to look after the latest and most advanced New Holland
financing company that specialises in agriculture. products.

New Holland App New Holland Style

Product apps - NH Weather - PLM Calculator - PLM Academy Want to make New Holland a part of your everyday life? Browse the
comprehensive selection on www.newhollandstyle.com. A whole
range of items are available including hard wearing work clothing
and a vast selection of scale models, together with so much more.
New Holland. As individual as you.
18 SPECIFICATIONS

Models B100 C B110 C B115 C

New Holland Engine* FPT Industrial F5H FPT Industrial F5H FPT Industrial F5H
No. of cylinders /valves 4/4 4/4 4/4
Capacity (cm3) 3400 3400 3400
Aspiration Turbocharged Turbocharged Turbocharged
Injection Common rail Common rail Common rail
ECOBlue ™ Compact HI-eSCR system (selective catalytic reduction) l l l
Compliant with engine emissions regulations Tier 4B / Stage 4 Tier 4B / Stage 4 Tier 4B / Stage 4
Rated engine power ISO TR14396 - ECE R120 [kW/hp(CV)] 72/98 82/111 82/111
Rated engine speed (rpm) 2200 2200 2200
Maximum engine power ISO TR14396 - ECE R120 [kW/hp(CV)] 84/114 89/121 89/121
Maximum torque ISO TR14396 @ 1400rpm (Nm) 453 460 460
Fuel tank capacity (l) 131 131 131
Electrical
12 Volt alternator (Amps) 160 160 160
Battery capacity (CCA / Ah) 900 / 95 900 / 95 900 / 95
Transmission
Powershuttle transmission (40kph) l l –
Type (FxR) 4x4 mechanical 4x4 mechanical –
Forward / Reverse maximum speed (kph) 39 / 46 39 / 46 –
PowerShift™ transmission (40kph) O O l

Type (FxR) 4x3 electronic 4x3 electronic 4x3 electronic

Forward / Reverse maximum speed (kph) 40 / 26 40 / 26 42 / 29
Axles
Front axle type Open diff Open diff Open / Limited slip diff
Front axle oscillation (°) +/- 11 +/- 11 +/- 11
Rear axle (mm) 100% lockable 100% lockable Open / Limited slip diff
Turning radius - 2 wheel steer mode, 4WD engaged, without brakes
External tire (mm) 4300 4300 7830
Bucket edge (mm) 5600 5600 8550
Hydraulic system
Pump type standard Twin gear Twin gear Variable displacement
Pump type optional Variable displacement Variable displacement –
Twin gear pump flow @ 2200rpm (l/min) 151
Variable displacement pump flow @ 2200rpm (l/min) 165
Maximum pressure level (bars) 205 205 205
Brakes
Type Power brakes Power brakes Power brakes
Brake disc, quantity x area (cm3) 4 x 309 4 x 309 6 x 182
Cab
Cab with FOPS - Level 2 l l l

Work light package: 10 halogen / 10 LED l/O l/O l/O

Mechanical Comfort seat l l l

Pneumatic suspension Deluxe seat O O O

Air conditioning O O O

Noise level - internal / external [dB(A)] 77 / 102 77 / 103 77 / 103

Vibration levels - upper limbs / abdomen (m/s2) 2.5 / 0.5 2.5 / 0.5 2.5 / 0.5
Tyres
Front tyre diameter (inches) 18 or 20 18 or 20 28
Rear tyre diameter (inches) 26 or 28 26 or 28 28
Operating weight
With standard backhoe and 6-in-1 bucket (kg) 8120 8120 8370
With extendible backhoe and 6-in-1 bucket (kg) 8800 8800 9100
l Standard O Optional – Not available * Developed by FPT Industrial
 19

R R R
T

N
O U
G
H S S S

M
F F F
Q P P P
N N N
T T T

O O O
L
G G G
U U U

C H H H V

D IQ Q Q
M M M

L L L
A A A B B B C C C V V V

J J J D D D I I I
K K K E E E
Z Z Z
Z

Dimensions B100C - B110C B100C - B110C TC B115C TC

A - Ground distance over front axle (mm) 1870 1975 1975
B - Wheelbase (mm) 2175 2175 2200
C - Pivot distance over rear axle (mm) 1325 1325 1340
D - Max. distance over rear axle (with 915 mm backhoe bucket) (mm) 1780 1780 1795
E - Overall lenght (mm) 5825 5930 5970
F - Height to top of boom (mm) 3875 3875 3930
Q - Back ramp angle (°) 23 23 22
P - Cab height (mm) 2950 2950 3000
I - Loader bucket width (mm) 2250 2250 / 2400 2400
J - Stabilizer width on ground (mm) 2300 2300 2275
K - Width at tires (mm) 2325 2325 2390

Loader specifications B100C - B110C TC B115C TC

Design Tool Carrier Tool Carrier
Bucket size - general purpose type (m3) 1.0 1.15
Maximum loader breakout force (daN) 6545 5410
Lifting capacity to maximum height (kg) 3450 3380
L - Digging depth (mm) 120 90
M - Bucket roll back angle on ground (°) 43 45
N - Reach at full height (mm) 830 750
O - Maximum operating height (mm) 4250 4310
G - Hinge pin height (mm) 3460 3520
H - Maximum dump height under bucket at 45° (mm) 2750 2745

Backhoe specifications B100C B100C - B110C - B115C

Arm type Short Short Extended Long Long Extended
Bucket Breakout force (daN) 5970
Arm digging force (daN) 3765 2595 3225 2390
R - Digging reach at max. height (mm) 2265 3240 2490 3485
S - Bucket rotation (°) 203
T - Digging height (mm) 5425 6175 5615 6350
U - Dumping height (mm) 3570 4325 3765 4500
V - Digging reach at ground level (mm) 5580 6315 5830 6965
Z - Digging depth (mm) 4385 5625 4665 5880
New Holland Top Service:
customer support and customer information.

Top Availability Top Speed Top Priority Top Satisfaction

If you need information, or have Express parts delivery: when you Fast-track solution during the We drive and track the solution
an out of hours question, ring our need it, where you need it! season: because your harvest you need, keeping you informed:
toll-free number*. All day, every can’t wait! until you are 100% satisfied!
day, we are just a call away.

For more details, ask your New Holland dealer!

* Calls to the Top Service team are free from landlines in the United Kingdom and Republic of Ireland. UK-based mobile
calls are also free, but Republic of Ireland mobile users should call 01 2421881 and this will be charged at your standard
network rate.

lubricants
AT YOUR OWN DEALER

New Holland prefers

www.newholland.com/uk - www.newholland.com/ie

The data indicated in this folder are approximate. The models described here can be subjected to modifications without any notice by the manufacturer. The drawings
and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for any further information. Published by
New Holland Brand Communications. Bts Adv. - Printed in Italy - 06/19 - (Turin) - 194000/INB