Scribd
Upload
113 views2 pages

Network Theory Ii Assignment

This document contains 20 questions related to network theory and filter design. The questions cover topics such as: - Drawing characteristic curves for low pass and high pass constant K filters - Designing low pass and high pass prototype filters given cutoff frequency and load impedance specifications - Calculating cutoff frequency and characteristic impedance for pi and T filter sections - Defining composite, notch, and m-derived filters - Designing constant K band pass and band stop filters - Designing low pass and high pass composite filters using T-sections - Defining attenuation and the relation between neper and decibel units - Designing symmetrical T-attenuators and bridge T-attenuators given specified attenuation and

Uploaded by

Qutubkhan Kheraluwala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views2 pages

Network Theory Ii Assignment

This document contains 20 questions related to network theory and filter design. The questions cover topics such as: - Drawing characteristic curves for low pass and high pass constant K filters - Designing low pass and high pass prototype filters given cutoff frequency and load impedance specifications - Calculating cutoff frequency and characteristic impedance for pi and T filter sections - Defining composite, notch, and m-derived filters - Designing constant K band pass and band stop filters - Designing low pass and high pass composite filters using T-sections - Defining attenuation and the relation between neper and decibel units - Designing symmetrical T-attenuators and bridge T-attenuators given specified attenuation and

Uploaded by

Qutubkhan Kheraluwala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DECCAN COLLEGE OF ENGINEERING & TECHNOLOGY

Dar-Us-Salam, Nampally, Hyderabad-01


B.E II/IV - III – SEM (CBCS) ECE-A&B, 2020-2021
Subject: Network Theory – II Assignment

1. Draw the Characteristic Curves of Constant K Low Pass Filter.


2. Draw the Characteristic Curves of Constant K High Pass Filter.
3. Calculate the Values of Inductor and Capacitor of a Proto Type Low Pass Filter Composed
of Pi section to operate with a terminating load of 600 ohm and to have a Cutt-off
frequency of 3 KHz.
4. A Proto Type High Pass Filter has a Cutt-off frequency of 10 KHz and Nominal impedance
is 600 ohms. Calculate the element values of L and C?
5. Find the Cutt-off frequency of filter section

L = 20 mH , 2C = 200PF

6. Find the Characteristic Impedance of the Pi Section Shown Below

2L = 200 mH , C = 20PF

7. Define Composite Filter?


8. Define Notch Filter?
9. Drawbacks of Constant K Filter.
10. Advantages m – Derived filter.
11. Design a Constant K Band Pass a Cut-off frequencies 4 KHz, 10 KHz and Nominal
Impedance is 500 ohm.
12. Design a Constant K Band stop a Cut-off frequencies 5 KHz, 15 KHz and Nominal
Impedance is 600 ohm.
13. Design a Low pass Composite Filter to meet the following Specifications: fc=2000Hz,
Infinite Frequency is 2050 Hz, Rk=500 ohms. Use T-section to develop the Composite
Filter.
14. Design a High pass Composite Filter to meet the following Specifications: fc=3000Hz,
Infinite Frequency is 2050 Hz, Rk=600 ohms. Use T-section to develop the Composite
Filter.
15. Define Attenuation and Express the relation between Nepers and Decibels.
16. Design the Symmetrical T-Attenuator that offers 50dB attenuation when the load is 450
ohm.
17. If the design impedance and attenuation of a symmetrical Bridge T – Attenuator be 610
ohm and 45dB respectively, design the symmetrical Bridge T – Attenuator
18. Define Inverse Network?
19. Define Series and Shunt equalizer.
20. Define Symmetrical and Asymmetrical Attenuator?

You might also like