Scribd
Upload
8K views6 pages

Door Rate Analysis

The document provides cost estimates for various door and door frame items. It estimates the cost of a 1.0 square meter flush door at 3062 rupees including ISI marked stainless steel hinges and screws. It further estimates adding 1.0 mm thick lamination to the flush door on both sides would cost an additional 1777 rupees per square meter. A lever handle lock set with a 10-inch lever handle, lock body and 60mm cylinder lock is estimated to cost 5974 rupees per piece including material, labor and other charges. Individual cylinder locks are estimated at 933 rupees each. Finally, it provides an estimate of 218874 rupees per square meter for providing and fixing

Uploaded by

Mohd Israil Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
8K views6 pages

Door Rate Analysis

The document provides cost estimates for various door and door frame items. It estimates the cost of a 1.0 square meter flush door at 3062 rupees including ISI marked stainless steel hinges and screws. It further estimates adding 1.0 mm thick lamination to the flush door on both sides would cost an additional 1777 rupees per square meter. A lever handle lock set with a 10-inch lever handle, lock body and 60mm cylinder lock is estimated to cost 5974 rupees per piece including material, labor and other charges. Individual cylinder locks are estimated at 933 rupees each. Finally, it provides an estimate of 218874 rupees per square meter for providing and fixing

Uploaded by

Mohd Israil Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Providing and Fixing ISI maeked flush door shutters Conferming to IS: 2202 (Part-I)

non-decorative type, core of block board construction with 1st class hard wood.
35 mm thick flush door including ISI marked Stainless Steel butt Hinges
with necessary screws.
Rate
Code No. Description Unit Qty. (in Rs.) Amount
Detail cost for 2.2 Sqm
Material
717
35 mm thick flush door of approved Make
(1700+ 16% Watage=1972) Sqm 2.2 1972.00 4338.40
9999 Carriage of Door L.S. 100.00
Fittings for a door of 2.2 Sqm
8220 Stainless Steel Butt Hinges Nos 3 258.00 774.00
Stainless Steel Screws L.S. 100.00
Labour for Fixing Shutter
156 Carpenter Day 0.55 550.00 302.50
114 Beldar Day 0.55 350.00 192.50
Total 5807.40
Add Water Charges @ 1% 58.07
Add CPOH@ 15% 871.11
Cost of 2.2 Sqm 6736.58
Cost of 1.0 Sqm 3062.08
Says Sqm 3062.00
Providing and Fixing ISI marked approved 1.0 mm thick Lamination on flush door shutters on both
sides.
Rate
Code No. Description Unit Qty. (in Rs.) Amount
Detail cost for 2.2 Sqm both side
Material

1.0 mm thick Lamination of


approved Make
717 (1075 per PC) Sqm 2.2X2 528.50 2325.40
9999 Carriage of Door L.S. 50.00
Pesting Material (Fevicol, Tape &
Adhesive etc.) L.S. 500.00
156 Carpenter Day 0.55 550.00 302.50
114 Balder Day 0.55 350.00 192.50
Total 3370.40
Add Water Charges @ 1% 33.70
Add CPOH@ 15% 505.56
Cost of 2.2 Sqm 3909.66
Cost of 1.0 Sqm 1777.12
Says Sqm 1777.00
Add Flush Door Rate for 1.0 Sqm 3062.00
G.Total Flush Door With Lamination 4839.00
Providing and Fixing Lever Handle with lock body & Cylinder Lock of ISI Marked & Approved Make
Code No. Description Unit Qty Rate Amount
Detail Cost for 1 Pc
Material
2464
Lever Handle, Lock body 10" & Cylinder
Lock 60 mm (2566+588+616=3770) Nos. 1 3770.0 3770.0

9999 Carriage of Material L.S. 1 50.0 50.0


Labour
112 Carpenter Day 0.55 600.0 330.0
Sundries (Screws etc.) L.S. 1000.0
TOTAL 5150.0
Add Water Charges@1% 51.5
Add CPOH@15% 772.5
Cost of Each Lock 5974.0
Providing and Fixing Cylinder lock of ISI Marked & Approved Make
Code No. Description Unit Qty Rate Amount
Detail Cost for 1 Pc
Material
2464 Cylinder lock 60 mm Nos. 1 647.0 647.0
(actual+5%)
9999 Carriage of Material L.S. 1 20.0 20.0
Labour
112 Carpenter Day 0.25 550.0 137.5
TOTAL 804.5
Add Water Charges@1% 8.0
Add CPOH@15% 120.7
Cost of Each Lock 933.2
Say 933.0
Providing and Fixing approved Wooden Door Frame in Lift Shaft
Rate
Code No. Description Unit Qty. (in Rs.) Amount
Detail cost for 0.038 Cum or 38 cudm
Material
2466
Hollock (Mirandi Wood) in Scantling
(Cost of 1.0 cum,
40774+5% wastage=42813) Cudm 38 418.00 15884.00
9999 Carriage of Timber L.S. 100.00
Black Japan on Back L.S. 50.00
156 Carpenter Day 0.77 550.00 423.50
114 Balder Day 0.07 350.00 24.50
Total 16482.00
Add Water Charges @ 1% 164.82
Add CPOH@ 15% 2472.30
Cost of 0.036 Cum 19119.12
Cost of 1.0 Cum 531086.67
Says Sqm 218874.00

You might also like