24 VOLT Electric stacker trucks (SX)

1.200 and 1.600 kg capacity

24 VOLT Electric pedestrian pallet truck (PX)
2.000 kg capacity
CLARK ELECTRIC PALLET AND STACKER TRUCKS

875 mm

Low chassis optimizes the view of the

890 mm forks.
The low chassis design is further
enhanced by a tapered battery cover
(PX), allowing optimum visibility of the
forks and load.

PX20 SX12 SX16

2,0t Capacity 1,2t Capacity 1,6t Capacity
Max Lift: 5,210 mm Max Lift: 5,210 mm

Warehouse trucks in Built To Last® design

With the electric pallet truck PX20 and our stacker trucks SX12 and SX16 CLARK, the inventor of the forklift pre-
sents strong and reliable warehouse trucks according to the well known “Built To Last”® Philosophy.
This means the CLARK design provides the user with robust and long lasting electric stacker and pallet trucks.
Whether for loading and unloading of vehicles or heavy material handling in the warehouse, CLARK warehouse
trucks are made for tough applications and can be equipped with batteries up to 375Ah. The optional side battery
removal enables these trucks to be used in two or three-shift applications.
100%
480 mm

100% precise and ergonomic operation

All functions for lifting and lowering are controlled by a newly

developed ergonomic tiller arm. For the operator this means
more time to focus on the application.

The precise proportional control of the hydraulic lift on SX12

and SX16 offers a safe, precise and accurate positioning of the
goods onto warehouse racking.

Outstanding view through the

SX Upright

Manoeuvrable + AC Technology = By extra wide upright rails the best possible visibility
though our uprights could be realized. 480 mm on
Standard uprights and 390 mm on Triple uprights.
best productivity and availability This allows for precise handling and increases
safety during transportation of goods.

The option „Initi-

al-Lift“ gives the SX
trucks the ability to
operate on uneven
grounds and on
small ramps. In
addition it allows the
SX trucks to carry
two pallet loads at
the same time.

530 mm
With a width of just 710 mm and an L2 measurement of only
530mm (Length to fork face), when using a 150 Ah battery,
the PX20 is the perfect choice, particularly to work in narrow
spaces, but also for block storage applications.
STANDARD FEATURES & BENEFITS

Newly developed ergonomic tiller arm

With the tiller arm each movement can be controlled quickly
and easily.

If the tiller arm is released, the arm automatically returns back

to the neutral position, activating the automatic braking.

For left and right-handed operators the SX and PX models are

equally well controlled – all levers and buttons for driving and
lifting functions are arranged on both sides of the ergonomically
designed tiller arm.

AC systems / Powerful driving behaviour

With a maintenance free AC drive motor the CLARK electric
stacker and pallet trucks are dynamic and at the same time
precise.

The Zapi control allows the individual adjustment of the

driving behaviour so the performance can be adapted to the
respective application.

The AC traction motor and the one-piece front cover

allow service technicians fast and easy access to major
components, ensuring high availability and reducing your
maintenance costs to a minimum.

Available additional equipment Available additional equipment

Pallet truck PX Pallet Stacker SX

• Tandem load wheel • Various uprights Simplex, Standard, Hi-Lo, Triple

• Tandem load wheel
• Smart backup alarm (travel alarm) rabbit switch
• Smart backup alarm (travel alarm)
• Key pad (PIN code access) • Key pad (PIN code access)
• Load backrest • Integrated onboard charger
• Load backrest
• Integrated on-board charger
• Integrated onboard charger
• Platform version • Platform version
• Different battery compartments • Wire mesh screen mast guard
• Side battery removal (only for large battery compartment) • Various battery compartments
• Side battery removal (only for large battery compartment)
• Battery change table for side removal (1 battery)
• Battery change table for side removal (1 battery)
THE RIGHT SOLUTION FOR EVERY APPLICATION

Activation for operation with vertical tiller Activation via PIN Code
With a four-digit PIN, the truck
As an optional request a button can be activated even without
for operation with vertical tiller the ignition key.
arm can be installed on the
underside of the tiller head. Thus, only authorized persons
have access to the truck –
Thus, the vehicle can be also an automatic shut down
accurately and sensitively protects against unauthorized
driven through narrow spaces. usage.

For example on lorries, this The driving characteristics can

allows the positioning of euro 1x slow forward movement also be adjusted individually for
pallets as close as possible to 2x slow backward movement each PIN code.
the sidewall.

Uprights on SX12 and SX16 Battery compartments and display

The standard display provides information on operating
hours, battery capacity and also includes a maintenance
indicator.
Developed by CLARK these Various versions of the one piece frame are available
uprights ensure high residual depending on battery capacity. A metal battery hood cover is
capacities even at high lift standard equipment.
heights.
PX20: 150, 250 or 375Ah batteries
A standard built-in upright SX12: 150Ah or 250Ah batteries
damping system reduces SX16: 250Ah or 375Ah batteries
shocks and vibrations
to proctect the upright For the 375Ah battery compartment an
components and the load. additional side battery change is possible
(option).

For easy operation the optional integrated

battery charger allows to recharge the battery
at any mains socket.

Initial lift for SX12 and SX16

The “Initial lift” option allows SX trucks to operate on uneven floors and to move
across small ramps or loading bridges.

The fact that two parts of the truck (battery compartment, as well as the forks) are
lifted, the ground clearance is increased, even with nominal load capacity.
The initial lift is 110 mm (h3).

Your further advantage: The Initial lift allows simultaneous transportation of two
loads at the same time (double-stack loading).

Capacity of the initial lift (separately) 1,200 kg (SX12) or 1,600 kg (SX16).

Load capacity combined 600/600 kg (SX12) or 800/800 kg (SX16).
THE RIGHT SOLUTION FOR EVERY APPLICATION

Optional platform:
Both model series SX and PX can be
equipped with a folding driver platform.
This allows operators to increase safety
and ergonomics during the application.

The upper part of the platform has a

non-slip surface and provides additional
suspension for optimum comfort.

The very low step platform height of only

160 mm also makes it easier to step on
and off the platform every day.

Furthermore the higher position using the

platform improves the all-round visibility in
operation.
Should the driver leave the platform and
thereby raise this slightly, the vehicle
automatically switches to standby mode
and can no longer be moved.

Powerful and compact:

PX and SX models are equipped with
solid forks for a long lifetime.
The central position of the tiller arm offers
optimal manoeuvrability. 160 mm

Heavy duty
forks for a long
lifetime.
CLARK Original Parts
You bought the original
Keep it that way!
The CLARK PartsPRO® System:
is our industry-leading electronic parts and service documentation tool that provides dealers with a
quick and accurate method of identifying parts for every CLARK forklift built since 1961. PartsPRO®
ensures the availability of the most current technical information and has the unique capability to
create parts manuals specific to your mixed CLARK fleet, making it simple to positively identify and
order the correct part(s) from your local CLARK dealer.
The right CLARK part – The First Time, Every Time.
 Note: Photos and illustrations are based on information at time of printing and are subject to change without notice.
Some products may be shown with optional equipment. Model assumption detail variations are possible.

4579072 SX & PX
Dealer:

CLARK EUROPE GmbH

Dr.-Alfred-Herrhausen-Allee 33 · 47228 Duisburg / Germany
Tel: +49 (0)2065 499 13-0 · Fax: +49 (0)2065 499 13-290
[email protected] · www.clarkmheu.com
© 2014 CLARK EUROPE GmbH Printed in Germany