0% found this document useful (0 votes)
26 views

Prajwal Report

The document describes a structural frame with three members connected by nodes and subjected to loads. It provides node coordinates, member properties, support conditions, applied loads, and bending results for each member.

Uploaded by

Prajwal Pawar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
26 views

Prajwal Report

The document describes a structural frame with three members connected by nodes and subjected to loads. It provides node coordinates, member properties, support conditions, applied loads, and bending results for each member.

Uploaded by

Prajwal Pawar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Nodes

Node ID X (m) Y (m) dX (mm) dY (mm) Rot (rad)


1 0.0 0.0 0.000 0.000 0.000
2 8.0 0.0 -0.000 0.000 0.001
3 14.0 0.0 -0.000 0.000 -0.001
4 17.0 0.0 -0.000 -4.856 -0.002

Sections
Section Name E (kN/mm²) I (mm) A (mm²)
DEFAULT 200.000 0.000 0.050

Members
From To Length (m) Section
1 2 8.000 DEFAULT
2 3 6.000 DEFAULT
3 4 3.000 DEFAULT

Supports
Node Type dx (mm) dy (mm) Rot (rad) Rx (kN) Ry (kN) M (kNm)
2 ROLLER_Y 0.000 0.000 0.000 -0.000 14.997 0.000
3 ROLLER_Y 0.000 0.000 0.000 -0.000 10.854 0.000
1 FIXED 0.000 0.000 0.000 0.000 13.148 19.063

Point Loads
Member Location (m) Magnitude (kN) Angle
2-3 3.000 10.000 90.000
3-4 3.000 5.000 90.000

Distributed Loads
Member Start Location Load Length Start Value End Value
(m) (m) (kN/m) (kN/m)
1-2 0.000 8.000 3.000 3.000
Member 1-2
Location Axial Force Shear Force Bending Slope Deflection_Y Deflection_X
(kN) (kN) Moment (mm) (mm)
(kNm)
0.0L 0.000 13.148 19.063 0.000 0.000 0.000
0.1L 0.000 10.748 9.504 -0.001 -0.251 -0.000
0.2L 0.000 8.348 1.865 -0.001 -0.811 -0.000
0.3L 0.000 5.948 -3.854 -0.001 -1.436 -0.000
0.4L 0.000 3.548 -7.652 -0.001 -1.944 -0.000
0.5L 0.000 1.148 -9.531 -0.000 -2.212 -0.000
0.6L 0.000 -1.252 -9.490 0.000 -2.181 -0.000
0.7L 0.000 -3.652 -7.529 0.001 -1.851 -0.000
0.8L 0.000 -6.052 -3.647 0.001 -1.287 -0.000
0.9L 0.000 -8.452 2.154 0.001 -0.611 -0.000
1.0L 0.000 -10.852 9.875 0.001 -0.009 -0.000

Axial Force Diagram

Shear Force Diagram

Bending Moment Diagram


Member 2-3
Location Axial Force Shear Force Bending Slope Deflection_Y Deflection_X
(kN) (kN) Moment (mm) (mm)
(kNm)
0.0L 0.000 4.146 9.875 0.001 0.000 -0.000
0.1L 0.000 4.146 7.387 0.000 0.286 -0.000
0.2L 0.000 4.146 4.900 0.000 0.439 -0.000
0.3L 0.000 4.146 2.413 0.000 0.505 -0.000
0.4L 0.000 4.146 -0.075 0.000 0.526 -0.000
0.5L 0.000 -5.854 -2.562 0.000 0.549 -0.000
0.6L 0.000 -5.854 0.950 0.000 0.600 -0.000
0.7L 0.000 -5.854 4.463 0.000 0.634 -0.000
0.8L 0.000 -5.854 7.975 -0.000 0.587 -0.000
0.9L 0.000 -5.854 11.488 -0.000 0.397 -0.000
1.0L 0.000 -5.854 15.000 -0.001 -0.000 -0.000

Axial Force Diagram

Shear Force Diagram

Bending Moment Diagram


Member 3-4
Location Axial Force Shear Force Bending Slope Deflection_Y Deflection_X
(kN) (kN) Moment (mm) (mm)
(kNm)
0.0L 0.000 5.000 15.000 -0.001 0.000 -0.000
0.1L 0.000 5.000 13.500 -0.001 -0.293 -0.000
0.2L 0.000 5.000 12.000 -0.001 -0.647 -0.000
0.3L 0.000 5.000 10.500 -0.001 -1.055 -0.000
0.4L 0.000 5.000 9.000 -0.002 -1.510 -0.000
0.5L 0.000 5.000 7.500 -0.002 -2.006 -0.000
0.6L 0.000 5.000 6.000 -0.002 -2.536 -0.000
0.7L 0.000 5.000 4.500 -0.002 -3.092 -0.000
0.8L 0.000 5.000 3.000 -0.002 -3.669 -0.000
0.9L 0.000 5.000 1.500 -0.002 -4.259 -0.000
1.0L -0.000 0.000 0.000 - - -

Axial Force Diagram

Shear Force Diagram

Bending Moment Diagram

You might also like