Scribd
Upload
132 views

Doosan Power Systems India PVT Limited: Magnetic Particle Examination Report

This 3 sentence summary provides the key details from the magnetic particle examination report: The report documents the magnetic particle examination of the SIMS-YOKE equipment for M/s Bandel TPS, which was tested after stress relieving. No rejectable indications were found during the 100% examination using red dry particle testing with an AC magnetizing current of 220 amps. The equipment was approved based on meeting the acceptance standards of ASME Section VIII Division I.

Uploaded by

Balkishan Dyavanapelly
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
132 views

Doosan Power Systems India PVT Limited: Magnetic Particle Examination Report

This 3 sentence summary provides the key details from the magnetic particle examination report: The report documents the magnetic particle examination of the SIMS-YOKE equipment for M/s Bandel TPS, which was tested after stress relieving. No rejectable indications were found during the 100% examination using red dry particle testing with an AC magnetizing current of 220 amps. The equipment was approved based on meeting the acceptance standards of ASME Section VIII Division I.

Uploaded by

Balkishan Dyavanapelly
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

DOOSAN POWER SYSTEMS INDIA PVT LIMITED

No :
  MAGNETIC PARTICLE EXAMINATION REPORT DATE :
CUSTOMER : M/s BANDEL TPS EQUIPMENT : SIMS – YOKE
CUSTOMER P.O.No. : ------ DRAWING No. :
PROJECT : UNIT #5, 210MW PART No. :
:   PART NAME :
QAP.No./FQP No : FQP WELD JOINT DETAIL :
DATE OF
QAP. STAGE No. : AFTER Stress Relieving :
EXAMINATION
PROCEDURE No : REV:
ACCEPTANCE STANDARD : ASME SEC VIII Div I  
MATERIAL & THICKNESS :  
LIGHTING
STAGE OF TEST :  AFTER SR :
EQUIPMENT
EXTENT OF TEST :  100 %
SURFACE CONDITION :  SMOOTH LIGHT INTENSITY : LUX

SURFACE TEMPERATURE. :  22 ⁰C  


MPI EQUIPMENT TYPE : YOKE CURRENT FLOW : AC /DC
MODEL : PARTICLE : VISIBLE - DRY
  CIRCULAR
MAGNETISING METHOD : POWDER MAKE : MAGNA FLUX

PROD/POLE DISTANCE :  3 – 4 INCH COLOUR : RED


MAGNETISING CURRENT 220 AMPS BATCH NO :
SENSITIVITY CHECK :  
GROOVED TEST BLOCK :  ASTM TEST BLOCK  
FIELD INDICATOR :  
INTERPRETATION :

RECORD OF REJECTABLE INDICATIONS : 

DISPOSITION :

 EXAMINED BY
 

AUTHORISED INSPECTOR / INSPECTING AUTHORITY


NDE LEVEL II

FORMAT No:QC/F/06

You might also like