Scribd
Upload
35 views

Performance Standard

1. The document outlines new reference values and performance standards for various aspects of machine operation, including engine speed, hydraulic pressure, attachment speeds, travel speeds, and more. 2. It provides target values and acceptable ranges for over 17 measurement items related to the machine's mechanical, electrical, and hydraulic systems when operating in SP mode. 3. The standards are intended to establish consistent benchmarks for evaluating machine performance during inspections or repairs.

Uploaded by

Firman andika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Performance Standard

1. The document outlines new reference values and performance standards for various aspects of machine operation, including engine speed, hydraulic pressure, attachment speeds, travel speeds, and more. 2. It provides target values and acceptable ranges for over 17 measurement items related to the machine's mechanical, electrical, and hydraulic systems when operating in SP mode. 3. The standards are intended to establish consistent benchmarks for evaluating machine performance during inspections or repairs.

Uploaded by

Firman andika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

New Machine Performance Judgment Standards SH120

New Machine Performance Judgment Standards

New Machine Performance Judgment Standards


Reference Values (SH130-5)
SP Mode (with Sumitomo standard bucket)
Reference
Item Unit
value
Idling 1050±10
No load A mode 1700±10
1 Engine speed min-1
No load H mode 1850±10
No load SP mode 2000±10
Standard 35.1±2.0
Main relief
Pressure boost 37.2±2.0
Up 38.4±2.0
Boom relief
Down 34.2±2.0
Open 38.5±2.0
Arm relief
Close 38.6±2.0

Open 39.0±2.0
Bucket relief
2 Pressure in each section Close MPa 38.5±2.0
Swing relief Left and right 30.3±2.0
Left and right, front
Travel relief 39.2±2.0
and back
4th pump relief 20.6±2.0
Pilot pump 3.9±1.0
For crusher
Option relief
For breaker
Boom cylinder retraction 5 max.
Natural fall distance (posi-
tion change) for each cylin- Arm cylinder extension 10 max.
3 mm
der with no load (in 10 Bucket cylinder retraction 15 max.
min.)
Overall bucket tip falling 250 max.
Up (stroke 580) 3.1±0.6
Boom (bucket open)
Down (stroke 580) 2.3±0.6
Open 2.3±0.6
4 Attachment speed Arm sec.
Close 2.8±0.6
Open 2.0±0.6
Bucket
Close 2.4±0.6
5 Swing speed (one rotation) Left and right sec. 4.2±0.6
6 Swing brake angle (180°) Left and right deg. 50° or lower
Swing motor leakage
7 L/min 11
amount

3 NST-08-02-010EN
1
New Machine Performance Judgment Standards
SP Mode (with Sumitomo standard bucket)
Reference
Item Unit
value
sec/6
3.7±0.6
High speed m

Travel speed (6 m travel Forwards and back- km/h 5.8±0.6


8
speed) wards sec/6
6.4±1.2
Low speed m
km/h 3.4±0.6

Travel sprocket speed (10 High speed 11.3±0.8


9 sec
rotations) Low speed 19.1±2.4

Travel turning amount Forwards and back- High speed


10 mm 1000 max.
(20 m off travel amount) wards Low speed
11 Shoe tension amount mm 230 - 260
Travel motor leakage
12 L/min 6
amount

Swing ball race bearing Up and down 1.1 max.


13 mm
movement distance Left and right 4.1 max.
Bucket tip movement
14 Left and right mm 60 max.
amount
Compression 419
15 Recoil spring dimensions mm
Free 478
Travel high speed
Pressure boost
Coil resistance of each Coil resistance temper-
16 Swing brake Ω 41
solenoid valve ature 20 ℃
Lever lock
Power save
SP mode 571±20
No load H mode 571±20
Hydraulic pump A mode 500±20
17 Electromagnetic propor- mA
tional valve milli-amp SP mode 600±20
2 reliefs H mode 600±20
A mode 537±20

NST-08-02-010EN 4
2

You might also like