Scribd
Upload
124 views

Summative-Test-3-5 Tve Exploratory

This document contains a summative test for a class on agriculture and carpentry. The test has multiple choice, matching, and fill-in-the-blank questions about wood types, lumber measurements, joint types, and carpentry terminology. It will be used to evaluate student learning on these topics related to woodworking and construction.

Uploaded by

Mjnicole Marteja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
124 views

Summative-Test-3-5 Tve Exploratory

This document contains a summative test for a class on agriculture and carpentry. The test has multiple choice, matching, and fill-in-the-blank questions about wood types, lumber measurements, joint types, and carpentry terminology. It will be used to evaluate student learning on these topics related to woodworking and construction.

Uploaded by

Mjnicole Marteja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Republic of the Philippines

Department of Education
Region I
San Carlos City Division
Speaker Eugenio Perez National Agricultural School

SUMMATIVE TEST#4.3

Name : ___________________________________ Grade & Section : ____________


Teacher : _________________________________

SUMMATIVE TEST 4.3 SCORE: ____________

I. Direction: Identify the correct answer in each statement.


 
1.______________ come from coniferous trees whose seeds are en
closed in cones such as in pine and fur.
2. _____________ is a by-product of lumber.
3. ______________ come from deciduous tree with broad leaves.
4. _______________ are used for furniture making and other nail set
and covered with putty or wood plastic.
5. _______________ are used to beautify and improve the quality of
the project.
 
II. MATCHING TYPE: Match column A with the correct answer on column B. Write the letter of the correct
answer before the number.

A B
 
_____ 1. An indispensable material a. hardwood
In carpentry. b. plywood
_____ 2. It comes from deciduous tree c. water based
with broad leaves . d. wood
_____3. It is a by-product of lumber. e. shellac
_____4. It uses water as a solvent.
_____5. It is a resinous substance.
SUMMATIVE TEST 4.4 SCORE: ____________
Direction: Choose the letter of the best answer from the
choices below. Write the letter of your answer before the number.

SUMMATIVE TEST 4.4

___ 1.It is an approximate calculation or judgment of the value,number, quantity or extent of


something .
a. Board feet c. Purchasing
b. Estimate d. Quality

___ 2. What is the board feet of 2” x 4” x 12’?


a. 5 Bf. c. 6 Bf.
b. 7 Bf. d.8 Bf.

___ 3. How many inches in 4 feet?


a. 24 c. 32
b. 48 d. 54

___ 4. How many millimeters in 3 inches?


a. 7.62 c. 762
b. 72.6 d. 76.2

___ 5.Jester bought 5 pieces of lumber. The dimesion of each is 3” x 4” x 10”. How much will
she pay for the 5 pieces of lumber ,if the cost per board foot is P 25.00?
a. 38 c. 54
b. 83 d. 90

___ 6. What is the board feet of 6” x 9” x 12”?


a. 2.5 c. 4.5
b. 3.4 d. 5.5

___7. What is the board feet of 6” x 8” x 10’?


a. 20 c. 30
b. 40 d. 50

___ 8. Given 2” x 5” x 14”. How much will you pay if you bought 10 pieces of lumber and cost per board is
P50.00?
a. P 250.00 c. P365.00
b. P 460.00 d. P485.00

___ 9. How many centimeters in 5 inches?


a. 12.7 cm c. 127 cm
b. 12.5 cm d. 1.25 cm

___10.Carl bought 8 pieces of lumber which is 2” x 7” x 12’. How many board feet
of lumber did he buy?
a. 112 bd. ft. C..98 bd. ft.
B. 56 bd. ft D. 124 bd. ft.
SUMMATIVE TEST 4.5 SCORE: ____________

Direction: Read each item carefully and choose the letter of the best answer from the
choices below. Write the letter of your answer on the space provided for.
 
___ 1. These are typically used in making book shelves,they support the shelf
without the benefit of any additional fasteners, any glue or hardware s
simply holds the shelf in place.
a. Dado Joint b. Dowel Joint c. Lap Joint d. Miter Joint
___ 2. It is the backbone of almost any wood joinery method you’ll find.
a. Dado Joint b. Dowel Joint c. Lap Joint d. Miter Joint
___ 3. It simply refers to the process of joining two pieces of a project by
overlapping them.
a. Dado Joint b. Dowel Joint c. Lap Joint d. Miter Joint
___ 4. It is usually perpendicular joint made by fastening together parts with the
ends cut at an angle.
a. Dado Joint b. Dowel Joint c. Lap Joint d. Miter Joint
___ 5. It is a sturdy joint for connecting wood pieces. Basically it uses a square
peg into a square hole.
a. Dowel Joint c. Through– Dovetail Joint
b .Mortise and Tenon Joint d. Tongue and Groove Joint
___ 6. This very strong joint is also sometimes known as a lapped, English, or
plain dovetail.
a. Dowel Joint c. Through– Dovetail Joint
b .Mortise and Tenon Jointd. Tongue and Groove Joint
___ 7. It is a method of fitting similar objects together, edge to edge, used mainly
with wood, in flooring, parquetry, panelling, and similar constructions.
a. Dowel Joint c. Through– Dovetail Joint
b .Mortise and Tenon Jointd. Tongue and Groove Joint
___ 8. How many degrees do you need to draw in making Miter joint?
a. 45 degrees b. 55 degrees c. 65 degrees d. 40 degrees
___ 9. The tenon length is usually about ______ the depth of the piece of timber it is being inserted into. Now
you must mark your tenon width and it should be around ______the thickness of the timber.
  a. 2/3rds depth and 1/3rd c. 1/3rds depth and 1/3rd
th th
b. 1/4 depth and 1/4 d. 1/4th depth and 3/3rd
___ 10. It is used to clear away the waste wood. your tenon width and it should
is being inserted into. Now you must mark
a. chisel b. hammer c. pencil d. wood

You might also like