Scribd
Upload
264 views

Moduflex Power Core (12kW) Rev01

The Moduflex+ series is a customizable modular power system designed using high efficiency rectifier modules and an intelligent controller. It provides monitoring and management for applications such as telecom infrastructure and data centers. Key features include hot-swappable rectifier modules, a scalable cabinet design, high power density, and over 96% efficiency. The system has a capacity range of 12kW, inputs that can accept single or three-phase voltages, and outputs of up to 48Vdc. It is designed for operating temperatures from -20°C to +75°C.

Uploaded by

Steven Se
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
264 views

Moduflex Power Core (12kW) Rev01

The Moduflex+ series is a customizable modular power system designed using high efficiency rectifier modules and an intelligent controller. It provides monitoring and management for applications such as telecom infrastructure and data centers. Key features include hot-swappable rectifier modules, a scalable cabinet design, high power density, and over 96% efficiency. The system has a capacity range of 12kW, inputs that can accept single or three-phase voltages, and outputs of up to 48Vdc. It is designed for operating temperatures from -20°C to +75°C.

Uploaded by

Steven Se
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT DESCRIPTION

The Moduflex+ series is designed using Enetek’s state of art high efficiency switchmode rectifier modules and
intelligent controller, complete with the respective load and battery distribution, AC incoming as well as surge
protection. The solution can be customized accordingly to specific requirements.

The user friendly SMU01 controller, coupled with its compact size and simple-to-operate interface, is highly
adaptable and provides the monitoring and management of the system solution.

APPLICATIONS KEY FEATURES


• Macro cell BTS • Hot-Swap Rectifier Modules
• Microwave • Modular, Scalable Cabinet Design
• LTE / WiMax
• High Power Density
• FTTX
• Broadband Access • Highly Efficient @ >96%
• Optical Fibre Transmission System • Front-to-back Airflow
• IDC (Internet Data Centres) • Excellent EMC Performance
• Wide Input Voltage Range
• Wide Temperature Range
• Compliant with Global Standards
TECHNICAL SPECIFICATIONS
MODEL Moduflex+
Capacity Range 12kW
INPUT SPECIFICATIONS
1-Phase 230Vac
Mains Input Configuration 3-Phase 230Vac (∆)
3-Phase 400Vac+N (Y)
Power Factor ≥ 0.99
Frequency 45Hz to 65Hz
THD < 5% (50% to 100% load)
Soft Start
Input Protections Surge Protection
Overvoltage Protection
OUTPUT SPECIFICATIONS
Nominal Output Voltage 48.0Vdc
Output Power 12kW
Efficiency >96%
BATTERY DISTRIBUTION
Battery Low Voltage Disconnect BLVD @ 200A
Battery Distribution 4 x 27mm width 80A-125A 1P MCB (Configurable)
LOAD DISTRIBUTION
Low Low Voltage Disconnect LLVD is optional
Load Distribution 12 x 18m width 6A-63A 1P MCB (Configurable)
CONTROLLER and RECTIFIER TYPE
Rectifier Module ETR+ range of rectifier modules
Controller Module SMU01 (refer to datasheet)
ENVIRONMENTAL
Operating Temperature Range -20oC to +75 oC (de-rates above 55 oC)
Storage Temperature Range -40oC to +70 oC
Operating: 5% to 98% RH non-condensing
Relative Humidity
Storage: 0% to 98% RH non-condensing
Acoustic Noise <58dB @ full load, 40 oC
PHYSICAL
Dimensions WxDxH 482 x 390 x 222.25 (mm) (5U)
Net Weight ~15kg (excluding rectifier modules)
DESIGN STANDARDS
Electrical Safety EN/IEC60950
EMC EN55022/CISPR22 Class B, EN61000-4-2/-3/-4/-5/-11

Due to continuous product development, specifications are subject to change without prior notice Rev01

You might also like