Baumer

W2
Thermowells
Bar stock (Flanged)

Special Features
 Design as per PTC 19.3
 These Thermowells are manufactured from solid bar stock and
installed into the process by using a flanged connection
 This design is suitable for all type of RTD’s, Thermocouples,
Mechanical as well as digital thermometers
 Full penetration welded
 Available in various shapes like Straight, Straight with reduced tip,
partial taper & full taper
 All type of flanges and flange facings are available as per ANSI /
DIN / JIS & BS

Applications
Chemical plants On shore
Petrochemical plants Off shore
Engineering plants Other similar process industries

Thermowell Drawings

A A A
B B B
A
B
C C C
C H H H
H

F F F
F
U D U U
U D D
D
RL

E E E E
LT

G G G
S - Straight R - Straight Reduced Tip P - Partial Taper F - Full Taper
A- Finished Head Size E - Tip Thickness U - Insertion Length
B- Instrument Connection F - Major Diameter RL - Reduced Tip Length
C- Flange G - Minor Diameter LT - Taper Length
D- Bore Diameter H - Extension Length

Thermowell Installation
Thermowell
Design and specifications subject to change without notice

Gasket

Flow
Weld

Process Pipe
31- 08 -12

www.baumer.com Page 1 / 4
 Baumer W2
Thermowells
Bar stock (Flanged)

How To Order Example

Basic Model W2
Type
S - Straight R - Straight Reduced Tip P - Partial Taper F - Full Taper X
Well Material
(It is recommended that the well material and flange material (wetted area) should be same.)
LM AISI 316 SS EP AISI 410 SS LT Monel LV Titanium XX
LN AISI 316L SS LO AISI 316Ti SS LU Inconel 600 LX Nickel
LP AISI 304 SS EO AISI 310 SS ES Inconel 625 LY HRS 446
ER AISI 304L SS LQ Carbon Steel ET Incolloy 800 LZ Alloy 20
EN AISI 321 SS EU Incolloy 825 LS Hastelloy C
Note : Other Materials are available on request.
Flange Material
LM AISI 316 SS EN AISI 321 SS LT Monel LV Titanium XX
LN AISI 316L SS LO AISI 316Ti SS LU Inconel 600 LX Nickel
LP AISI 304 SS EO AISI 310 SS ES Inconel 625 LZ Alloy 20
ER AISI 304L SS LQ Carbon Steel LS Hastelloy C
Note : Other Materials are available on request.
Instrument Connection
4BF ½” BSP (F) 5TF 3/4” BSPT (F) 6NF 1” NPT (F) 3MF M18 x 1.5 (F) 6MF M24 x 1.5 (F) XXX
4NF ½” NPT (F) 5NF 3/4” NPT (F) 6BF 1” BSP (F) 4MF M20 x 1.5 (F) 7MF M27 x 2 (F)
4TF ½” BSPT (F) 5BF 3/4” BSP (F) 6TF 1” BSPT (F) 5MF M22 x 1.5 (F) 9MF M33 x 2 (F)
4FF ½” PF (F) 5PF 3/4” G (F) 6PF 1” G (F)
4PF ½” G (F)
Note : Other Connections are available on request.
Flange Type
1 Blind Flange 2 SORF Flange X
Flange “C” (size & Rating)
Refer Flange table for code selection. XXX
Flange Facing Type
R Raised Face F Flat Face J Ring type joint X
Flange Finish
1 - 125 AARH (Standard) 2 - 63 AARH X
Note : Other Flange finish are available on request.
Extension / Lagging Length “H” (In case of welding neck flange & threaded flange, consult factory.)
Please specify in mm For e.g. : for length 50 mm, mention H50 XXX
Finished Head Size “A” (Refer Table 1.1 for selection of Head Size for Thermowell.)
Please Specify in mm e.g. : For 28 mm Finished head Size, Specify A28 XXX
Type Of Head
Design and specifications subject to change without notice

K Hex Headed* L Round Headed M Round Headed With Spanner Slots. X

* Maximum “U” Length below Flange will be 250 mm.
Bore Diameter “D”
A 6.6 mm B 7 mm C 8.5 mm D 9 mm
X
E 10.5 mm F 11 mm G 13 mm H 13.5 mm
Note : Refer Table 1.3 of Thermowell Design Procedure for dimensions as per PTC 19.3
31- 08 -12

www.baumer.com Page 2 / 4
 Baumer W2
Thermowells
Bar stock (flanged)

Major Diameter “F” Example

S R P F
Major Diameter “F” Major Diameter Of Step ‘F’ Major Diameter Of Taper ‘F’ Major Diameter Of Taper ‘F’
XXX
Please specify in mm Please specify in mm Please specify in mm Please specify in mm
e.g. : for 22 mm, mention F22 e.g. : for 22 mm, mention F22 e.g. : for 22 mm, mention F22 e.g. : for 22 mm, mention F22 OR
XXX
Minor Diameter Of Step ‘G’ Minor Diameter Of Taper ‘G’ Minor Diameter Of Taper ‘G’ OR
Please specify in mm Please specify in mm Please specify in mm
e.g. : for 18 mm, mention G18 e.g. : for 18 mm, mention G18 e.g. : for 18 mm, mention G18
XXXXX

Length Of Step ‘RL’ Length Of Taper ‘LT’

Please specify in mm Please specify in mm
e.g. : for 100 mm step length from tip, e.g. : For taper length
specify RL100 from tip of 150 mm, specify LT150

Note : Refer Table 1.3 of Thermowell Design Procedure for dimensions as per PTC 19.3
Tip Thickness “E” XX
Standard Tip Thickness is 5 mm. e.g. : Specify E5 for 5 mm Tip Thickness For others, please specify in mm.
INSERTION LENGTH “U”
Please specify in mm e.g. : for 250 mm, mention U250
Note : Refer Table 1.4 of Thermowell Design Procedure for dimensions as per PTC 19.3 XXXX

Options
GG Plug and chain in SS TC Counter flange with studs, nuts & gasket XX
FW Electro polishing CW Marking by Laser
CX Marking by Engraving SX SS Tag Plate
Lining & Coatings (User to specify thickness during enquiry)
FI PTFE Lining* EW Zirconium Oxide Coating
FM Silicon Carbide Coating EX Stellite Coating
GK Rubber Lining* EY PTFE Coating
GJ Tungsten Carbide Coating
* Lining will be on wetted area of straight type wells only.
Overlay On Flange RF (User to specify thickness during enquiry)
LS Hastelloy ‘C’ LT Monel LV Titanium LX Nickel
LR Hastelloy ‘B’ LU Inconel 600 LW Tantalum LZ Alloy 20
Sleeve Material (Wall Thickness : 1 mm)
GM Hastelloy ‘C’ FQ Monel FT Tantalum (0.4 mm)
FO Hastelloy ‘B’ FR Inconel 600 FV Alloy 20
FP Nickel FJ Titanium
Tests & Certification
C1 Radiography for Bore Concentricity C8 Certification for Hydrogen Service
C2 IBR Certification C9 Certification for Oxygen Service
Design and specifications subject to change without notice

C3 Mechanical Test T1 Chemical Composition Test

C4 Ultrasonic Test T2 3.1B Material Conformity Certificate
C5 PMI Test T3 Radiography for Welding
C6 IGC Test T4 Dye Penetration Test
C7 Wake Frequency Calculations as per PTC 19.3# TF Conformity as per NACE standard
#Please Specify Fluid, Max. Pressure, Temperature & Flow velocity for wake frequency calculations as per PTC 19.3
Ordering Example:
W2 . X . XX . XX . XXX . X . XXX . X . X . XXX . XXX . X . X . XXX OR XXX OR XXXXX . XX . XXXX . XX
31- 08 -12

Note : Specifications and dimensions given in this product catalogue represents the state of engineering at the time of printing.
Modifications may take place and materials specified may be replaced by others without prior notice.

www.baumer.com Page 3 / 4
 Baumer W2
THERMOWELLS Thermowells
Bar stock (Flanged)

Flange Table With Connection Codes

AS PER DIN 2527 AS PER DIN 2642 AS PER ANSI B 16.5 AS PER BS - 10
DN PN CODE DN PN CODE DN PN CODE NOMINAL RATING/ NOMINAL
6 A01 6 A61 10 A90 SIZE CLASS CODE SIZE TABLE CODE
10 A02 10 A62 15 A91 150 B09 D B84
16 A03 16 A63 20 A92 300 B10 E B85
25 A04 25 A64 25 A93 ½” 600 B11 ½” F B86
10 40 A05 65 40 A65 32 10 A94 900 B12
64 A06 64 A66 40 A95 H B87
1500 B13 J B88
100 A07 100 A67 50 A96
2500 B14 K B89
160 A08 160 A68 65 A97
150 B15 D B90
250 A09 250 A69 80 A98
400 A10 400 A70 300 B16 E B91
AS PER DIN 2633 ¾” 600 B17
6 A11 6 A71 ¾” F B92
DN PN CODE 900 B18
10 A12 10 A72 H B93
16 A13 16 A73 10 A81 1500 B19 J B94
25 A14 25 A74 15 A82 2500 B20
20 A83 K B95
15 40 A15 80 40 A75
64 A16 64 A76 25 A84 NOMINAL RATING
CODE
32 16 A85 /CLASS NOMINAL
100 A17 100 A77 SIZE TABLE CODE
SIZE
160 A18 160 A78 40 A86 150 B21
50 A87 D B96
250 A19 250 A79 300 B22
65 A88 E B97
400 A20 400 A80 1” 600 B23
80 A89 1” F B98
6 A21 AS PER JIS - B 2210 900 B24
10 A22 AS PER DIN 2635 H B99
1500 B25
20 16 A23 NOMINAL RATING J C01
CODE DN PN CODE 2500 B26
25 A24 SIZE /CLASS K C02
10 A99 150 B27
40 A25 5K B57 D C03
15 B01 300 B28
6 A26 10A 10K B58 20 B02 E C04
1 1/4” 600 B29
10 A27 40K B59 25 B03 1¼” F C05
900 B30
16 A28 5K B60 32 40 B04 H C06
1500 B31
25 A29 15A 10K B61 40 B05 J C07
25 40 A30 2500 B32
40K B62 50 B06 K C08
64 A31 65 B07 RATING
5K B63 NOMINAL
CODE
100 A32 80 B08 SIZE /CLASS NOMINAL
20A 10K B64 TABLE CODE
160 A33 SIZE
40K B65 150 B33
250 A34 D C09
300 B34
400 A35 NOMINAL RATING E C10
CODE 1 ½” 600 B35
DN PN CODE SIZE /CLASS 1 ½” F C11
900 B36
6 A36 5K B66 H C12
1500 B37
10 A37 25A 10K B67 J C13
2500 B38
32 16 A38 40K B68 K C14
150 B39
25 A39 5K B69 D C15
40 A40 300 B40
32A 10K B70 E C16
6 A41 2” 600 B41 2” F C17
40K B71
10 A42 900 B42 H C18
5K B72
16 A43 1500 B43 J C19
40A 10K B73
25 A44 2500 B44 K C20
40K B74
40 40 A45
NOMINAL RATING
64 A46 NOMINAL RATING CODE NOMINAL
CODE SIZE /CLASS TABLE CODE
100 A47 SIZE /CLASS SIZE
160 A48 150 B45
5K B75 D C21
250 A49 300 B46 E C22
50A 10K B76
400 A50 2½” 600 B47 2½”
Design and specifications subject to change without notice

40K B77 F C23

6 A51 900 B48 H C24
5K B78
10 A52 1500 B49 J C25
65A 10K B79
16 A53 2500 B50 K C26
25 A54 40K B80
150 B51 D C27
50 40 A55 5K B81
300 B52 E C28
64 A56 80A 10K B82
3” 600 B53 3” F C29
100 A57 40K B83 H C30
900 B54
160 A58 J C31
1500 B55
250 A59 K C32
2500 B56
400 A60
31- 08 -12

Note : Specifications and dimensions given in this product catalogue represents the state of engineering at the time of printing.
Modifications may take place and materials specified may be replaced by others without prior notice.

www.baumer.com Page 4 / 4