Scribd
Upload
89 views7 pages

Softver Codovi Za RT4

Cheat codes allow certain actions to be performed in the system software. Codes are entered by long pressing the call button and typing the code. Many codes perform undocumented actions that could damage the system, so backing up the hard drive first is strongly cautioned. Some codes control settings like Bluetooth parameters, echo cancellation, microphone gains, and more.

Uploaded by

jovanicmarija
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
89 views7 pages

Softver Codovi Za RT4

Cheat codes allow certain actions to be performed in the system software. Codes are entered by long pressing the call button and typing the code. Many codes perform undocumented actions that could damage the system, so backing up the hard drive first is strongly cautioned. Some codes control settings like Bluetooth parameters, echo cancellation, microphone gains, and more.

Uploaded by

jovanicmarija
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Cheat Codes

Index » Software » Cheat Codes

Cheat Codes

The system allows several "Cheat Codes" (looks like videogame-speak but it is how it is called in the
software) to be entered that do some actions.

The codes are entered via the "call number" dialog. (just insert the codes like you are calling a
number)

In the previous versions (7.xx) , cheat codes were entered on the "Phone number dial" screen. (you
had to "dial the code")
It is now changed.
When you long-press the call button (Green) you get a "Cheat Code" input screen. After typing the
code you need to long-press the hangup (red) button to execute the command.

CAUTION: THE ACTIONS CALLED BY THESE CODES AREN'T DOCUMENTED. ALL INFORMATION
STATED HERE WAS *GUESSED* BY TRIAL & ERROR SO YOU SHOULD BE AWARE THAT ANY OF THESE
CODES CAN RENDER YOUR SYSTEM UNUSABLE OR EVEN DAMAGE IT.

**Do not use any of these codes before making a full backup of your system's hard drive.**

The meaning of some codes was Guessed using this site:


http://phonetic.com/phonetic.cgi?number=874
Just replace the numbers in the url

Some codes appear to be direct orders. Others (The ones that end with #) seem to accept
parameters.

##227562
##CARLOC | CAR_LOCATION#X#Y#Z (restarts)

##22786837
##CARTOVER | Show Carto version
##2335
##CDEJ | CD_EJECT (ejects cd)

##2386#
##CFUN

##256636
##CLNMEM | PURGE FLASH - (XXX) - CAUTION - IT ERASES ALL CONFIGURATION DATA, including
options only possible to set via diag tool! BACKUP YOUR DRIVE BEFORE USING THIS CODE.

##2763
##CPOF

Set ADC gain for BT : BTADC#sign(P(6)=plus, M(7)=moins)#value(-54;+12)

Set DAC Gain for BT : BTDAC#sign(P(6)=plus, M(7)=minus)#value(-102;+24)

##2833529#
##BTDELAY | Set block delay for eVoice lib: 0<delay<160

##283536#
##BTFLEN | Set filter length for echo compensation filter: 1<len<511

##286633#
##BTMODE | set eVoice lib mode (31=all, 27=all except nr,…)

##2867#
##BTNR | Set Noise Reduction attenuation for eVoice lib: 2<atten<20

##28668# | STRING_AUDIO_MOST_COMMAND

##287283#
##BTSAVE | Save or not mic_in, mic_out and echo_in signals on HDD(1 = save, 0= do not save)

##28865#
##BTVOL | Set BT far ampl volume for eVoice lib: 0<value<30

32 - EC - Echo Cancellation

##32#264# | SET_EC_CONFORT_NOISE_ADJUST
##32#2641# | SET_EC_CONFORT_NOISE_PARAM_1

##32#2642#
##EC | SET_EC_CONFORT_NOISE_PARAM_2

##32#2644#
##EC | SET_EC_CONFORT_NOISE_GAIN

##32#281#
##EC#CT1#| SET_EC_CONVERGENCE_TIME_1

##32#282#
##EC#CT2#| SET_EC_CONVERGENCE_TIME_2

##32#32# | STRING_ECHO_CANCELLATION_VALUE

##32#38#
##EC#DT# | SET_EC_DETECTION_THRESHOLD

##32#54# | STRING_ECHO_CANCELLATION_LENGTH

##32#63# | STRING_ECHO_CANCELLATION_OFF

##32#65#
##EC#NL# | SET_EC_NOISE_LEVEL

##32#66# | STRING_ECHO_CANCELLATION_ON

##32#67# | STRING_NOISE_REDUCTION_VALUE

##32#7#
##EC#S# | SET_EC_SOM_VALUE

##32#7283
##EC#SAVE | SET_EC_SAVE

##32#78#
##EC#ST# | SET_EC_SIDE_TONE

##32668# | Next Start with first boot condit.(=1 one time, =P permanent)
##38376# | DEBUG_D

##4#538# | SET_VGT_VALUE

##42668# | STRING_MIC_GAIN_CONTROLER

##474# GPH Graphics Test and diagnostics


- ##474#<test type>#<Parameters>

GPH GPH#0#2 for vehicle (BR) ##GPH#0#5 for bench

<Test Type>
0 Display type
0 ??
1 ASR (?)
2 VDO
3 Philips?
4 ??
1 ??
2 RGB
##474#2#<RED>#<GREEN>#<BLUE> (0-255)

3 Test Patterns
1
2
3 Photo?? (maybe the development team?)
4
5
6
7
8
9
10
11
12

4 Display info
1
5 Map display calculations
1
2
3
4
5
6
7
8
9
10
11
12
13

##494636#7#
##HWINFO#S#| HWINFO_SYSTEM refresh time in secs (=0 stop,=empty automatic)

##494636#8#
##HWINFO#T#| HWINFO_RADIO refresh time in secs (=0 stop,=empty automatic)

##5333529#
##LDDELAY| LD_DELAY in secondes

##562337 loader - FORCE LOADER - (XXX) You will need to use the Software Upgrade CD after
insering this code.

##562722 locq22 - LOC_Q2_2002 - LOC_Q2_2002 #1 Chatellerault #2 Paris


- resets location

##628229# NavBbx NAV_BLACK_BOX


- C_NavMMI::EvtCheatCodeNavBbx(void) - mmis.out

##62897
##NAVWP | Choose if we pass near way points or through Way Points (0 = through, 1 = near)

##722738 | DVD_REGION_CODE_ATTEMPTS

##724# | SET_MIC_ADC_VALUE

##734# | SET_MIC_DAC_VALUE
##734263# | DVD_REGION_CODE

##746628
##SIMNAV | ONOFF_SIMU_NAV

##767392
##SMSEXC | SEND_SMS_FOR_EXC

##777326
##SPRECO | SPEECH_RECOGNITION - (Speech Recognition RECO Test)

##77742# | SR_VAD_CMD_SILENT_THRESHOLD

##77743# | SR_VAD_DGT_SILENT_THRESHOLD

##77748# | SR_VAD_USR_SILENT_THRESHOLD

##77772# | SR_VAD_CMD_SPEECH_THRESHOLD

##77773# | SR_VAD_DGT_SPEECH_THRESHOLD

##77778# | SR_VAD_USR_SPEECH_THRESHOLD

##778378#
##SPTEST | SPEECH_RECOGNITION_TEST

##779564
##SPYLOG | SEND_SPY_LOG_BY_IRDA

##779362
##SPYENA | SPY_ENA

##779347
##SPYDIS | SPY_DIS

##779738
##SPYSET | SPY_SET

##779256
##SPYCLN | SPY_CLEAN
##7792886#
##SPYAUTO | NAV_SPY

##779476
##SPYGSM | SPY_GSM

##822586
##TABLUM | CALIBRATION_TAB_LUM

##826633
##VANOFF | SIMU_VAN_OFF

##837
##VER | DISPLAY_VER_TYPE

##874
##UPG

##884296
##VTH2Z6 | VTH_TO_Z6

You might also like