Scribd
Upload
35 views1 page

Page: 1 of 1: M/S.Ameenji Rubber Pvt. LTD

The document is a test report from a laboratory summarizing the results of mechanical tests conducted on a 3mm thick stainless steel sample submitted by M/S. Ameenji Rubber Pvt. Ltd. The tensile strength, yield strength, and elongation of the sample were all found to meet or exceed the minimum specifications for ASTM A240/240M SS 316L grade material. The sample was determined to meet the mechanical property requirements for this material grade.

Uploaded by

Sainath Amuda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views1 page

Page: 1 of 1: M/S.Ameenji Rubber Pvt. LTD

The document is a test report from a laboratory summarizing the results of mechanical tests conducted on a 3mm thick stainless steel sample submitted by M/S. Ameenji Rubber Pvt. Ltd. The tensile strength, yield strength, and elongation of the sample were all found to meet or exceed the minimum specifications for ASTM A240/240M SS 316L grade material. The sample was determined to meet the mechanical property requirements for this material grade.

Uploaded by

Sainath Amuda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Page : 1 of 1

ULR : TC737920000000304F
Issued To, : M/S.Ameenji Rubber Pvt. Ltd. Report No. : STL/200320002710
Address Date of Receipt : 20/03/2020
Corp Office : 5-5-65/1/A,F-14 S.A. Trade Center
Date of Start : 20/03/2020
First Floor, Ranigunj, Secunderabad-500003
Date of Completion : 20/05/2020
Telangana
Contact Person :Mr. Lakshmi Narayana Report Date : 20/05/2020
Phone : 9676999812
Customer Ref. No. : CRF:632,Date:19/03/2020
Sample Details : SS
Sample Description : 3 mm Thick

Sample Qty. : 01 No
Tests Required : Mechanical Testing

Test Result
S.No. Test Parameters Test Method Units Specifications Results

Mechanical Testing
Mechanical Properties of Metals
1 Tensile Strength ASTM MPa 485 min 536.53
A370-17a
2 Yield Strength ASTM MPa 170 min 301.63
A370-17a
3 % Elongation ASTM % 40 min 55.90
A370-17a
Observation : The above Mechanical Properties are Meetings to ASTM A240/240M SS 316L grade Material

**End of Report**

For SANRAY LABORATORIES PRIVATE LIMITED


Authorized Signatory

REMARKS The sample is submitted by the customer. *IBR Approved Laboratory


The results printed on the report are limited only to the sample submitted.
The report cannot be used for any legal purpose.

You might also like