Scribd
Upload
540 views

CT20 Performace Specifications - v0.1

This document provides preliminary specifications for the Christensen CT20 Core Drill from Atlas Copco Exploration Drilling including: - Depth capacity for wireline and conventional coring of up to 2,450 meters and 1,600 meters respectively. - Components like the hydraulic chuck assembly, rod holder, drill base supports, mast and feed system, power unit, drillhead and spindle. - Performance specs for the main hoist, wireline, power unit, hydraulic system, drillhead and spindle speeds. - Standard equipment, options, dimensions, weights and other technical details.

Uploaded by

gustavo caicedo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
540 views

CT20 Performace Specifications - v0.1

This document provides preliminary specifications for the Christensen CT20 Core Drill from Atlas Copco Exploration Drilling including: - Depth capacity for wireline and conventional coring of up to 2,450 meters and 1,600 meters respectively. - Components like the hydraulic chuck assembly, rod holder, drill base supports, mast and feed system, power unit, drillhead and spindle. - Performance specs for the main hoist, wireline, power unit, hydraulic system, drillhead and spindle speeds. - Standard equipment, options, dimensions, weights and other technical details.

Uploaded by

gustavo caicedo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Atlas Copco Exploration Drilling

Christensen CT20 Core Drill


Preliminary
CT20 PERFORMANCE SPECIFICATIONS Preliminary
Depth capacity coring (wireline or conventional) Chuck assembly
N wireline 2 450 m (8030 ft) Type: hydraulic open, spring closed
H wireline 1 600 m (5250 ft) Maximum inside diameter: 120,6 mm (4,75 in)
P wireline 1 055 m (3440 ft) Holding capacity: 178 kN kg (40 000 lb)
Depth are based on vertical water filled hole
Rod Holder
Main hoist Type: hydraulic open, gas spring closed
Single line capacity: Bare drum 178 kN (40 000 lb) Maximum inside diameter: 210 mm (8,3 in)
Line speed: @ max displacement 0,6 m/sec (117 ft/min) Holding capacity: 200 kN (45000 lb)
@ min displacement 1,17m/sec (232 ft/min)
Cable size: XX m (118 ft) x 24 mm (61/64 in) Drill base supports
Self supporting chassis, designed to be mounted on a truck
Wireline Support: 4 hydraulic jacks
Capacity: 4 600 m (15 000 ft) of 4,76 mm (3/16 in) Pad diameter: xx / xx mm (in)
2 600 m (8 530 ft) of 6,35 mm (1/4 in) Travel length: xxx mm (in)
Line pull: bare drum: 28,5 kN (6 380 lb)
full drum: 5,1 kN (1 151 lb) Weight
Line speed: bare drum 1,38 m/sec (272 ft/min) Compleate rig: 15 000 kg (33 070 lb)
full drum 5,1 m/sec (1 004 ft/min) Depends on version and options

Mast and feed system Dimensions (L – W – H)


Feed travel: 3,5 m (11,5 ft) Transport xxxx – 2500 – 4100 (mm)
Feed speeds: fast and slow with variable control
Mast dump: 2 m (6,56 ft) Standard equipment
Thrust: 91 kN (20 460 lb) -Hydraulic mast dump -Hydraulic rod holder (PW)
Pull: 200 kN (45 000 lb) -Drill speed gauge -Multi display (MWD)
Drilling angle: 45 to 90 degrees - Safety guards (with inter-lock) -Fuel tank 900 l (238 gal)
Rod pull length: 6,09 m (20 ft) - User-friendly control panel - High Altitude Kit
-Hydraulic oil reservoir fill pump - Hydraulic Mud Mixer
Power unit & filtration - Hydraulic Mud Mixer
Manufacture: Cummins - Make and brake with joy-stick - Cat walks
Model: QSL 9 Tier III (Tier IIIB will be available) - Ladder kit - Safety system for W.A.H.
Volume: 8,8 liter 6 cyl. WL winch with Level-wind and Parking Brake
Power: xxx kW (xxx hp)
RPM: 1800 Options
Engine type: Diesel turbocharged/after cooled - Hyd pressure filters -Sound reduced engine sides
Cooling: Water -Trido 220 - Tier IIIB (from 2011)
Electrical system: 24 V (Alternator 24 V, xxx Amp) - Rod Rack (capacity 2000 m N standing, 90-80 deg)
- Crawler mounted (to be designed, targeted delivery early 2011)
Hydraulic system
Primary pump: xx MPa – xxx l/min (xxxx psi – xx gal/min)
Secondary pump: xx MPa – xxx l/min (xxxx psi – xx gal/min)
Auxiliary pump: xx MPa – xx l/min (xxxx psi – xx gal/min) All weights and dimensions are approximations and are subject
Hydraulic oil cooling: Air to change

Drillhead and spindle speeds


Power: hydraulic motor – variable speed/reversible
Final drive: 5 in chain driven in oil bath – 2,1 ratio
Spindle (inner diameter): 120,6 mm (4,75 in)
Range selection: manual control from operator’s station
Hydraulic slide away

(v0.1)

Atlas Copco Craelius


Birstagatan 13
SE-195 82 Märsta
SWED

You might also like