Recently, I was asked this question:

 Is it possible to put something like a timer on .ppt slides showing the time count down?
It is possible and there are several ways to do it. Some ways are more complicated than
others.

I prefer to use something that is simple, quick to make and easy to edit.

Click on 20 Second Timers to download 7 templates .

I have also put together four step-by-step guides to make very simple timers that you can use with
your presentations.

Parts of the Screen

The animation ribbon and the animation pane are both very important and will be used frequently
when making timers. On the animation ribbon you will also see two boxes called animation
duration and animation delay. Without these features, it wouldn’t be possible to create these timers.
Take a look at the screenshot below if you want to see where they are located on the screen.

Screenshot of PowerPoint 2013 with important parts of the screen labelled

The selection pane is also a very important part of the PowerPoint. The image below shows you
where you can find the menu on the home ribbon to open the selection pane.

Screenshot of PowerPoint 2013 with important parts of the screen labelled

Four different ways to create a timer in PowerPoint.

How to create a wheel timer in PowerPoint

Step One: Insert a doughnut shape and change its size, fill color, line color and add any desired
effects.

Step Two: Select the shape and assign it an exit (red) animation. Go to the animations ribbon and
select the wheel animation.

Step Three: On the animations ribbon, change the animation duration. Instead of 02:00 (2

Seconds), change it to 20:00 (20 Seconds).

Step Four: Open the animation pane and select start with previous. A zero (0) will appear next to
the animation. This means the animation will begin automatically when the slide is shown.

Step Five: Start your presentation. Your timer will automatically start and the wheel will begin to
disappear.

How to create a bar timer in PowerPoint

Step One: Insert a rounded rectangle and change its size. I chose a height of 1 cm and

a width of 30 cm.

Step Two: On the format ribbon, click on align objects and select align objects center (with
the align to slide option checked).

Step Three: Change the fill color, the line color and any desired effects.

Step Four: Copy the shape. Change the fill color but keep the same line color. Stack the new shape
over the original shape.
Step Five: Go to the animation ribbon and select the exit (red) animation called wipe. Click
on effect options to change the direction of the animation. Choose from left.

Step Six: Open the animation pane and select start with previous. A zero (0) will appear next to
the animation. This means the animation will begin automatically when the slide is shown.

Step Seven: On the animations ribbon, change the animation duration. Instead of 02:00 (2

Seconds), change it to 20:00 (20 Seconds).

Step Eight: Start your presentation. Your timer will automatically start and the color of the bar will
appear to change from the left.

How to create an hourglass timer in PowerPoint

Step One: Insert an isosceles triangle and change its size, fill color, line color and add any desired
effects.

Step Two: Copy the shape and rotate it. Click on rotate objects and select flip vertical.

Step Three: Move the shape so both points of the triangles meet. Change the color of upper triangle.

Step Four: Select the upper triangle and go to the animation ribbon. Select

the emphasis (yellow) animation called fill color. Click on effect options and choose the color of
the lower triangle. Change the animation duration from 02:00 (2 Seconds) to 20:00 (20 Seconds).

Step Five: Select the lower triangle and go to the animation ribbon. Select

the emphasis (yellow) animation called fill color. Click on effect options and choose the color of
the upper triangle. Change the animation duration from 02:00 (2 Seconds) to 20:00 (20 Seconds).

Step Six: Open the animation pane and select start with previous for both animations. A zero

(0) will appear next to the first animation. No number will be shown next to the second animation.
They will happen at the same time.

Step Seven: Start your presentation. Your timer will automatically start and the color from the upper
triangle will change and appear in the lower triangle as if it were an hour glass.

How to create a numerical countdown timer in PowerPoint

Step One: Insert a shape and change its size, fill color, line color and add any desired effects. In the
video I have used a circle but you can use any shape.
 Circles, Rectangles and Diamonds are common shapes for a timer. However,
you could
also use a thought bubble (cloud callout) to show how much thinking time
there is,
or a speech bubble (oval callout) to show how long someone should speak
for.
Step Two: Insert text into your shape. Click on your shape, then go to the insert ribbon. Click
on draw horizontal text box and then click on your shape again. A cursor appears. Type in the
number 20 and format your text by choosing the text size and color. Delete 20 and replace it
with 0. (The reason for doing this is to make sure double digits fit within your shape.)

Step Three: Copy your shape several times. If you are making a 20 second timer, you need
to copy the shape 20 times. The easiest way to do this is to hold down CTRL and press D 20
times. This duplicates the shape 20 times. (If you hold down D instead of pressing it 20 times, it is
more difficult to judge how many copies you have made.)

Step Four: Rename the shapes in the selection pane so they are easier to recognize.

Step Five: Move your shapes and rename them. Change all the circles labelled 0 to 20, 19, 18, 17,
16, 15 etc.

Step Six: Select all the shapes and go to the animation ribbon. Select

the exit (red) animation called clear (disappear). Open the animation pane and make sure the
animations are in descending order. (20, 19, 18, 17, 16, 15 etc.) If they are not, just drag them to
move them up the list.

Step Seven: When you right-click on an animation in the animation pane you have three
choices.

1. On click of – You need to click with the mouse for the animation to happen.
2. Start with previous – The animation happens at the same time as the animation before it. If
there are no animations before it, then the animation will be automatic when that slide is viewed.
3. Start after previous – The animation won’t happen until the animation before it has been
completed.

Option 3 works well if you only have the numerical timer. Number 20 will be the first animation,
select start with previous. A 0 will appear next to it and the animation will be automatic. With all the
following animations select start after previous and set the animation delay to 01:00 (1 second).

This mean the first animation will be automatic, the second animation will
be one
second later (+1 second delay), the third animation will be two seconds
later
(+1+1 seconds delay) and the fourth animation will be three seconds later
(+1+1+1 seconds delay).
Option 3 doesn’t work well if you combine a numerical countdown with a wheel timer or a bar
timer.

In this case use option 2 and make sure you select start with previous for all animations. The
example video shows option two.

Number 20 is the first animation. Set the animation delay to 00.25 (25 centiseconds or a 1/4 of a
second).

(If the first animation is set to 00.00, you may not see the number 20 when the slide starts)

Number 19 is the second animation. Set the animation delay to 01.25 seconds (1 second and a 1/4
of a second).

Number 18 is the third animation. Set the animation delay to 02.25 seconds (2 1/4 seconds).

Number 17 is the fourth animation. Set the animation delay to 03.25 seconds (3 1/4 seconds).

Number 16 is the fifth animation. Set the animation delay to 04.25 seconds (4 1/4 seconds).

Although you have told PowerPoint to start all the animations at the same
time with option 2, by making the delay progressively bigger for each
animation you create a 1 second delay between each animation.
(If 0 doesn’t need an animation, remove it.)

Step Eight: Stack all the circles on top of each other, with 20 at the top and 0 at the bottom. You can
do this by moving each circle with the mouse, or you can align objects. Select all the objects and go
to format ribbon.  Select align objects and click on align objects center followed by align objects
middle (with the align select objects option checked.) All of the shapes will now be stacked on top
of each other.

Step Nine: Drag a box around all the shapes with the mouse to move them. If you click on the top
shape, you will only move the top shape. Move the countdown timer to where you want to position it
on the slide.

Step Ten: Start your presentation. Your timer will automatically start and the numbers will appear to
countdown from 20 to 0.

Extra Tips

Creating longer timers

The animation duration is used for the wheel, bar and hour glass timers. The animation duration is
set in seconds, so:

A one-minute timer = 60 seconds

A two-minute timer = 120 seconds
A three-minute timer = 180 seconds
A four-minute timer = 240 seconds
A five-minute timer = 300 seconds

Change the animation duration to a larger number to create a longer timer.

The maximum number that can be typed into the animation duration box on the animation

ribbon is 59 seconds.

This isn’t a problem. Open the animation pane. Right-click on your animation and select timing.  In
the timing dialog you can change the animation duration setting up to 10 minutes.

Automatic Transitions

When the countdown timer has finished you can move to the next slide manually (with the mouse or
the keyboard) or by using automatic transitions.

Take a look at the screenshot below if you want to see an example of the automatic transition
settings. If the countdown timer is 20 seconds, set the automatic transition for 20 seconds.
 Screensh
ot of PowerPoint 2013 with important parts of the screen labelled
Contact tekhnologic if you have any more questions.

Take care!