Scribd
Upload
232 views1 page

Typical Slab Details

The document provides details on the slab types, steel reinforcement, and thickness for different slab configurations in a construction project. Slab type S1 is a one-way slab with 8mm main steel bars at 175mm centers and 8mm distribution bars at 175mm centers, with a thickness of 125mm. Slab type S2 is a two-way slab with the same steel configuration as S1 and a thickness of 125mm. Slab type SC for staircases has 12mm main bars at 125mm centers, 8mm distribution bars at 175mm centers, and a thickness of 150mm.

Uploaded by

Srigopi Chand Ramineni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
232 views1 page

Typical Slab Details

The document provides details on the slab types, steel reinforcement, and thickness for different slab configurations in a construction project. Slab type S1 is a one-way slab with 8mm main steel bars at 175mm centers and 8mm distribution bars at 175mm centers, with a thickness of 125mm. Slab type S2 is a two-way slab with the same steel configuration as S1 and a thickness of 125mm. Slab type SC for staircases has 12mm main bars at 125mm centers, 8mm distribution bars at 175mm centers, and a thickness of 150mm.

Uploaded by

Srigopi Chand Ramineni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SLAB TYPE STEEL ALONG SHORT SP AN FOR TWO W AY SLAB STEEL ALONG LONG SPAN FOR TWO W A Y SLAB

STEEL ALONG LONG SPAN FOR TWO W A Y SLAB SLAB


MAIN STEEL FOR ONE W A Y SLAB DISTRIBUTION STEEL FOR ONE W AY SLAB THICKNESS
S1(ONE W AY) 8MM@ 175MM C/C 8MM @ 175MM C/C 125 MM
S2 (TWO W AY) 8MM@ 175MM C/C 8MM @175MM C/C 125 MM
S.C (STAIR CASE) 12MM@ 125MM C/C 8MM @ 175MM C/C 150 MM
SIGNA TURE OF STRUCTURAL ENGINEER:
Note: PROJECT: PLACE: STRUCTURAL CONSULTANTS:
1.Grade of concrete mix shall be M20 conforming to IS:456-2000. ARCHITECT:
GUNTUR.
2.Reinforcement shall be high strength deformed bars of grade Fe500 SCALE: NOT TO SCALE
VAP ENGINEERS (I) PVT LTD.
conforming to IS 1786-1985. TITLE:
DRAWN BY: V ASANTHA EMERALD GARDENS,
TYPICAL FLOOR ROOF SLAB DETAILS. MADHURI [email protected]
3.Clear cover to reinforcement shall be 20mm. CHECKED BY: G1 CLASSIC APARTMENTS.
4.Alternate bars to be cranked at L/5 from support. DWG.NO: GSQ/GNT/805-TFRSBD.
SRIMANNARAYANA.CH
MADHAPUR,HYDERABAD
5.Extra bars to be provided for a length 0.3L on either side of supports on top face REV . NO: DESCRIPTION: REV . BY DA TE E mail:
in between crank bars. SHEET.NO:1 17-12-14 Mobile No : +91-98481-97807

You might also like