Scribd
Upload
57 views1 page

Modular Speaker System: 700 Including Feet

The MX-5 is a modular speaker system designed for dedicated home cinemas with acoustically transparent screens. It has a frequency range of 40 Hz to 20 kHz and power handling of 100-300 watts RMS for the LCR speakers and 200-350 watts RMS for the subwoofer. The LCR speakers are 2-way with an 8-inch woofer and 1-inch tweeter while the subwoofer is a bass reflex design with an 11-inch woofer.

Uploaded by

Jimit Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views1 page

Modular Speaker System: 700 Including Feet

The MX-5 is a modular speaker system designed for dedicated home cinemas with acoustically transparent screens. It has a frequency range of 40 Hz to 20 kHz and power handling of 100-300 watts RMS for the LCR speakers and 200-350 watts RMS for the subwoofer. The LCR speakers are 2-way with an 8-inch woofer and 1-inch tweeter while the subwoofer is a bass reflex design with an 11-inch woofer.

Uploaded by

Jimit Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MX-5

MODULAR SPEAKER SYSTEM

Designed for dedicated home cinemas with an


acoustically transparent screen

Minimum screen size 16:9 HDTV 92” (2037 x 1146mm)


Minimum screen size 21:9 scope 90” (2101 x 900mm)

2040
700
including
feet
540

315
190

MX-5 LCR

Frequency Range 40 Hz - 20 kHz

Power Handling 100 - 300 Watts RMS recommended amplifier power

Sensitivity 92 dB (2.83V / 1m)

Impedance 8 Ohms

Configuration 2-Way

Low Frequency Driver Single 205mm (8”) paper cone driver. 38mm (1½”) voice coil wound on high powered aluminium former, with ventilated magnet
assembly and copper shorting ring for low distortion
High Frequency Driver 26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw
waveguide

MX-5 Subwoofer

Frequency Range 30 Hz - 200 Hz

Power Handling 200 - 350* Watts RMS recommended amplifier power


*The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers.
Sensitivity 90 dB (2.83V / 1m)

Impedance 4 Ohms

Configuration Bass reflex, down firing vent

Low Frequency Driver Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former, with
vented magnet assembly

MX5 Specifications Sheet_008


krix.com
ADELAIDE | 14 Chapman Road, Hackham, SA, 5163, Australia T +61 8 8384 3433 F +61 8 8384 3419 [email protected] Pg. 1 of 1

You might also like