Saral 300: Compact, Accurate and Reliable
Saral 300: Compact, Accurate and Reliable
Metrology Highlights
Ÿ Saral 300 sets the benchmark for metrology in its class and Ÿ Meter reading in the absence of mains power
exhibits stable metrological characteristics under diverse Ÿ Integrated base and cover
conditions in the field Ÿ Current and temperature profiled to help detect loose
connections and attempts to burn
Ÿ Walkby meter reading over BLE (Optional)
2.00
Average error Class 0.2 limit Class 1 limit
1.50
1.00
0.50
Simplicity
Error %
-2.00
0% 1% 10% 100% 1000%
Benefits
Revenue protection Ÿ Revenue protection against tamper and fraud
Ÿ Revenue protected against wrong connections such as Ÿ Peak and o -peak tari management
reversal, interchange of earth/neutral, or partial earthing Ÿ Stringent ingress protection, can be used outdoors
Ÿ Extensive forensic information for detection and analysis of Ÿ Low cost of ownership
tamper attempts
Ÿ Locking arrangement for incoming mains cable, to inhibit
wiring tampers
Compliance
Standards IS 13779, IS15959 for ICS and
CBIP 325 for magnet
Mechanical
Dimension W x H x D 126 mm x 222 mm x 92 mm
Enclosure material
Meter case: LEXAN 143/ 943 or equivalent
Terminal block: LEXAN 500R/equivalent
Weight: 0.78 kg (approx.)
Sealing provision One wire seal and one paper seal between body and terminal block, two on
terminal block cover
Environmental
Ingress protection IP 54
Insulation class Protective class II
Temperature
Operating: -10 °C to +60 °C
Storage: -25 °C to +70 °C
Humidity: 95%, non-condensing
Features
Tari rate registers Up to 8 rate registers, for configurable energy channels
Maximum demand Up to 2 types, configurable across 8 registers
Specifications are subject to change without prior notice
www.securemeters.com
3-18/I/Ver 1.0