Scribd
Upload
12K views

Alex Lab Blueprints and PDF Guides

The document provides information about 14 blueprints and guides related to electrolyzers and hydrogen generation from Alex Lab. The blueprints include electrolyzers of various sizes producing between 0.5-20 liters of gas per minute that can be used for experiments, prototypes, and vehicles. Safety disclaimers are also provided, warning that some devices could be dangerous if safety precautions are not followed. Files for laser cutting or assembly instructions are included with several of the blueprints. Access to the full guides is provided through a YouTube channel or Patreon membership.

Uploaded by

saad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
12K views

Alex Lab Blueprints and PDF Guides

The document provides information about 14 blueprints and guides related to electrolyzers and hydrogen generation from Alex Lab. The blueprints include electrolyzers of various sizes producing between 0.5-20 liters of gas per minute that can be used for experiments, prototypes, and vehicles. Safety disclaimers are also provided, warning that some devices could be dangerous if safety precautions are not followed. Files for laser cutting or assembly instructions are included with several of the blueprints. Access to the full guides is provided through a YouTube channel or Patreon membership.

Uploaded by

saad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Alex Lab blueprints and PDF guides

All these PDF guides in English are available for Alex Lab Engineers http://youtube.com/alexlab/join
If YouTube Membership is not supported in your country, blueprints are also available on Patreon

#0001 Laboratory electrolyser

Blueprints of the body, plates and rubber gaskets


of the laboratory electrolyser.
Gas generation rate is 1-3 liters per minute.
Power 100-300 W.
Detailed instructions for the manufacture and assembly of similar
electrolyzers can be found in the following parts #0006 #0011 #0012.
#0002 PDF guide was vanished.

#0003 Compact electrolyser Mark X

Iron Man Nano Reactor) Portable electrolyzer with one pair of plates in a
plexiglass housing. Productivity is 0.5-1 liters of Brown Gas per minute.
Power up to 100W. The construction includes a stainless steel foam filter.
.dwg files for laser cutting of parts are attached

#0004 Grid and lights for Mark X electrolyzer

Instructions for making authentic decorative two-layer grating for the Iron
Man reactor and lighting for it.
.dwg files for laser cutting of parts are attached
#0005 Power supply for Mark X electrolyzer

Instructions for making a portable power supply for the Mark X.


The electrolyser and lightning have different supply voltages. This shows
how to assemble and connect the entire load from one battery block.

#0006 Iron Man Reactor Mark 1

Legendary Iron Man electrolyser rector. Power 100-300 W. Productivity is


1-3 liters of Brown Gas per minute. Suitable for powering Iron Man
Repulsor, gauntlet rocket launcher, artificial muscles and other gadgets.
Perfect model for practicing metal & electrical parts manufacturing skills,
and electrolyzers production
.dwg files for laser cutting of are attached

#0007 Apocalypse Reactor

Electrolyzer model from a pair of coaxial tubes. Low productivity is


compensated by simplicity of manufacture)
If it were necessary to make an electrolyzer in the conditions of a zombie
apocalypse, then it would look exactly like this.
#0008 Jet Batmobile Tumbler

How to make a model of an epic Batmobile with the simplest pulsating jet
engine from improvised means. Fueled with hydrogen, powered by any of
the electrolyzers.
.cdr files for cutting paper parts are nested.

#0009 Iron Man Repulsor and Exoskeleton

Coming to the most epic gadgets! Plasma Burst Repulsor and part of Alex
Lab's Iron Man Exosuit (gauntlet). Tools and materials, parts and
step-by-step manufacturing guide.
The best project for practicing metalworking and electrical skills.
The device is powered by Iron Man's reactor # 0006

#0010 Alex Lab tools and parts catalog

List of hand and power tools, materials, parts, spare parts, equipment for
shooting, etc. You will save weeks of your life if you use this file) The catalog
is regularly updated.
#0011 High pressure electrolyser

Device for generating Brown Gas under high pressure. This cell was used
as a hydrogen accelerator for a pit bike. Circulation tank is also described.
.dwg files for laser cutting are attached

#0012 1kW Electrolyzer

Powerful electrolyzer for 1-2 kW, gas generating rate up to 20 liters per
minute. Suitable for hydrogen cutting, welding, car engine cleaning and
other purposes where a high rate of hydrogen and oxygen generation is
required.

#0013 Iron Man suit Sketches

Craft sketches and drawings of the Iron Man exosuit, reactor and repulsor in
good quality.
#0014 Methodology for calculating and manufacturing electrolyzers

In this work, I summarize the knowledge and skills for building electrolyzers.
Principles of operation, method of calculating the power and rate of gas
generation, production sequence. The manual is regularly updated with new
editions.

All these PDF guides in English are available for Alex Lab Engineer
http://youtube.com/alexlab/join

If YouTube Membership is not supported in your country,


blueprints are also available on Patreon

⚠️ Disclaimer #1.
Some of the devices described in these instructions may pose a danger to life and health if the
safety rules are violated. Some devices are designed to generate and accumulate a highly
flammable gas under pressure. The main difference between HHO (Brown Gas) and other fuel
gases is that it contains both fuel and oxidizer in an ideal stoichiometric ratio for ignition. This
means that if a flame enters the system, the system will no longer exist.
Please be careful and follow safety precautions when working.

You might also like