Name of Work : CONSTRUCTION OF FOUR LANE FLYOVER BRIDGE WITH ITS APPROACHES ON

MAHENDRANAGAR CHOWKDI ON HALVAD - MORBI ROAD

Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
1 Clearing and grubbing site/road/land including uprooting all
vegetation, grass, bush shrubs, saplings and trees with girth, removal of
stumps of trees of girth of all sizes including removing stumps of trees
cut earlier and disposal of unserviceable materials and stacking of As per attached
serviceable materials as directed by Engineer with all leads and lifts seprate sheet
etc. complete as per specification. before commencement and after
completion of the work.
2 Demarkation of road alignment including marking out road line by
providing and fixing wooden pegs or steel rod of required size at every
25 M to 50 M including excavating trenches ion both sides of 0.30 m x As per attached
0.30m including supplying of labours and all materials for every work seprate sheet
etc complete.
3 Dismentaling the flexible pavement including removing and stacking
the dismentalled materials as and where directed - Granular Course As per attached
seprate sheet

4 Portable Barricade in Construction Zone (Installation of a steel portable

barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a
'A' frame made with 45 x 45 x 5 mm angle iron section, 2.0 m in height,
horizontal rail painted (2 coats) with yellow and white stripes, 150 mm
in width at an angle of 450, 'A' frame painted with 2 coats of yellow As per attached
paint, complete as per IRC:SP:55-2001 ) including Blinkers,Retro seprate sheet
reflective film/sticker.(All material of barricading which is used while
working will be property of the contractor(Agency) after completion of
the entire F.O.B. work)

5 Excavation for foundation of structures including existing pavement

surfaces including dewatering, shoring and strutting as necessary and
backfilling the trenches with suitable excavated material in layers of 15
to 20 cms and disposing of remaining unsuitable material with all lifts
and lead as directed and preparation of bed for concreting of
As per attached
foundations etc. complete as directed by Engineer and as per
seprate sheet
specification.
Soils of all types From 0 to 3m depth including ordinary earth, sand dry
/ wet soil, marine clay, boulders, kankars, soft murrum, hard murrum,
etc. For Open Foundation

6 Excavation in large boulders and soft rock by welding including

shoring, strutting and dewatering as necessary and disposing of the As per attached
excavated stuff as directed. For Open Foundation seprate sheet

7 Excavation in hard rock by dry-wet blasting and chiselling including

dewatering preparing foundation base by proper benching and As per attached
stepping and disposing of the excavated stuff as directed.(B) seprate sheet
prohibited Blasting. work. For Open Foundation
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
8 Carting of excavated material such as murrum, earth, kapachi, gravel,
brickbats, kankar, debris, sand, dismantled material, including loading,
unloading, stacking etc. complete at non objectional place as As per attached
directed by engineer in charge. seprate sheet
(a) Lead up to 3 Km
(b) Additional rate for lead above 3 and upto 5 km As per attached
seprate sheet
(c) Additional rate for lead above 5 and upto 10 km As per attached
seprate sheet
9 Providing and laying in situ machine mixed M-15 grade bedding
controlled cement concrete in foundation / below Open Foundation
including dewatering, shuttering, compacting, curing etc. complete As per attached
true to level and position as directed by Engineer and as per seprate sheet
specification.
10 Providing and laying controlled cement concrete M-35 and curing
complete including the cost of formwork but excluding the cost of As per attached
reinforcement for reinforced concrete work in (A) Foundations, seprate sheet
footings, Base of columns and Mass concrete.
11 Providing and laying machine mixed M-35 grade Controlled cement
concrete for cast-in-situ piers, abutments at any height or depth as per
approved design and drawings, with necessary centering, shuttering,
scaffolding, transporting, placing, compacting by mechanical As per attached
vibrators, finishing, curing and casting as per drawing etc. complete seprate sheet
excluding reinforcement as directed by Engineer and as per
specification.
12 Providing and laying in situ machine mixed controlled M-35 grade
cement concrete for RCC caps,side walls, tie walls etc. including M:45
pedestals over piers and abutments including necessary scaffolding
formwork, centering, transporting, placing, compacting by As per attached
mechanical vibrators, finishing and curing and casting, finishing at seprate sheet
any height or depth as per drawing etc. complete excluding
reinforcement, as directed by Engineer and as per specification.
(a) Pier Cap in M-35

(b) Pedestals & Seismic Restriner in M:45 As per attached

seprate sheet
13 Providing & fixing in position (Thermo mechanically treated bars) TMT
Fe500 D steel bars of various diameters for all RCC works in Pile, Pile
Cap and foundations as per detailed design & drawings and schedule
including cutting, bending, hooking the bars, binding with 18 SWG GI
wires or tack welding (only for piles) and supporting as required with all As per attached
lifts and leads etc. complete including cost of all labour, materials, seprate sheet
tools, plants, equipments etc. all complete as directed by Engineer
and as per specification.
Open Fpundation / Footing
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
14 Providing & fixing in position (Thermo mechanically treated bars ) TMT
Fe500 D steel bars of various diameters for all RCC works in
Foundations, Pier, Abutment wall,box wall, Abt.cap, Dirt
wall,sidewall,Retaining wall, Pedestals as per detailed design &
drawings and schedule including cutting, bending, hooking the bars,
As per attached
binding with 18 SWG GI wires and supporting as required with all lifts
seprate sheet
and leads etc. complete including cost of all labour, materials, tools,
plants, equipments etc. all complete as directed by Engineer and as
per specifications.
(a) Pier & Abutment

(b) Pier Cap, Abutment Cap, Padestal & Seismic Arrestor As per attached
seprate sheet
15 Providing and applying Coal Tar Epoxy protective paint for Pile Cap in
two coats of DFT 210 microns for foundations /concrete surfaces in As per attached
contact with soil complete as per Specifications and as directed by seprate sheet
the Engineer including all leads and lifts etc. complete.
16 Providing and casting in situ or precast controlled cement concrete M
45 for Prestressed concrete work in super structure including centering,
shuttering, curing, scaffolding, ramming, vibrating, finishing, launching As per attached
or shifting complete. (i) Solid Slab (ii) Deck Slab (iii) Main Girder (iv) seprate sheet
Diaphram or Cross Girder.
17 Providing & fixing in position (Thermo mechanically treated bars ) TMT
Fe500 D steel bars of various diameters for all RCC works in super
structure as per detailed design & drawings and schedule including
cutting, bending, hooking the bars, binding with 18 SWG GI wires and
supporting as required with all lifts and leads etc. complete including
As per attached
cost of all labour, materials, tools, plants, equipments etc. all complete
seprate sheet
as directed by Engineer and as per specifications.
(i) P.S.C. Girder
(ii) Diaphram (Cross Girder)
(iii) Deck Slab

18 Providing and fixing in position to exact profile High tensile steel wires
12.7/15.2mm dia of required ultimate strength conforming to low
Relaxation Prestressing steel strands including bending, cutting, tying
providing necessary standards as per IS 14268 and anchorages, As per attached
sheathing (HDPE), stressing, grouting, ducts as per detailed drawing seprate sheet
including necessary plant and machinary complete.

19 Providing and fixing in position fully moulded restrained elastomeric As per attached
bearings as per detailed drawings. seprate sheet
20 Providing and carrying out load test on bridge deck with simulated
loading including provision, placing and removal of loading,
supplying, fixing and removing deflection measuring instruments etc.
complete with platforms for fixing the instruments etc. complete as per As per attached
the details supplied and specification and as directed by Engineer seprate sheet
and including submission of required results in triplicate after
satisfactory completion of the load test.
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
21 Providing and casting RCC in M-40 controlled concrete Crash Barriers
as per detailed drawings including necessary scaffolding, centering,
formwork, mixing in machine, transporting, placing, compacting, As per attached
finishing, curing, etc. complete including providing and fixing of inserts seprate sheet
if any with all leads and lifts as per drawing & specification and as
directed by Engineer, excluding reinforcement.
22 Providing and casting insitu controlled cement concrete M-35 in RCC
Approach Slab including formwork, curing and finishing complete. As per attached
seprate sheet

23 Providing and fixing RCC M:25 architectural pylons at end of

approach structures including all materials, labour, reinforcement
laying, ramming, curing etc. complete as per detailed working As per attached
drawing. seprate sheet
(a) Concrete
(b) TMT Reinforcement As per attached
seprate sheet
24 Providing and fixing in position (Thermo mechnically Treated bars) TMT
Fe500 D reinforcing bars of various diameters for the above all RCC
works as per detailed designs and drawings and schedule including
cutting, bending, hooking the bars, binding with 18 SWG GI wires with As per attached
cost of all labour, materials, tools, plants, equipments, supporting as seprate sheet
required with all lifts and leads etc. all complete as per specification
and as directed by Engineer.
Approach Slab, Crash Barrier, R.C.C. Drain & Kerb/Median

25 Providing and laying Double Walled corrugated Pipes (DWC) of

Polyethylene (conforming to IS:14930-II) of 50mm O.D. / 38mm I.D. with
fittings and necessary connecting accessories of same material at As per attached
required depth for laying cable below footpath slab etc. complete as seprate sheet
per specification and as directed by Engineer.
26 Providing and fixing 100 mm diameter UPVC longitudinal / Downtake
runner pipe conduits including cost of all materials, labour, fixing in true
line and level, including bends, fixtures, specials etc. complete with all As per attached
lifts and leads etc. as per specifications and as directed by Engineer. seprate sheet

27 Providing and fixing 100 mm dia. G.I. Drainage spouts, as per MOST
Drg. No. SD/303 including grating with suitable clean out fixtures As per attached
including all leads and lifts etc. complete as per specification, design seprate sheet
& drawings and as directed by Engineer.
28 Providing and fixing in position strip seal type expansion joints as per
detailed drawing and approved Sp. including cost of all materials and
fixtures, welding, preparing surface for receiveing the joints including As per attached
all leads and lifts etc complete as per detailed approved drawing and seprate sheet
Sp. and as directed by Engineer. (Upto 40 mm Expansion)
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
29 Providing and applying two coats of 100% acralic breathable, Anti-
carbonation, Water proof, Heat Insulating decorative external coating
of sunanda or equivalent of approved shade after applying a primer
coat of same materail. Mix 1 lit. of Acralic paint and applying it as a
primer allow it to dry for 4-6 hours. Mix 1 liter of anticarbonation paint
with 400-600 ml. of water and apply two coats using brush/roller/spray
at 24 hours of interval between each coat. Acralic paint shall be
spray/brush/roller applied with minimum DFT of 200-250 microns and
shall conform to the following properties. Carbon dioxide diffusion
equvalent air layer thickness(DIN EN 1062-6) > 100 m.: Carbon Dioxide
diffusion resistance coefficient (DIN EN 1060-6) > 105 when tested as
per DIN EN 1062-6 from a research institution NBA accredited Grade A As per attached
and internationaly ranked among top 5 research institution in the seprate sheet
world in annual survey conducteed by Georgia Institute of
Technology, ranking of research institutions; Elongation of cured film
shall be as per ASTMD 2370/98 > 400 %; Cloride Ion Diffusion (ASTM C
1202)=Zero penetration ; Adhesion to concrete (ASTM D 4541) > 2
N/mm2 ; Solar reflective index (ASTM E 1980-11, EN 673:2011, EN
410:2011) >104, Whwn tested from Government approved laboratory
CEPT or equivalent. The inter-coat gap to be 24 hours. The rate shall
include complete treatment mentioned above.

30 Painting Two Coats on New Concrete Surfaces (Painting two coats

after filling the surface with synthetic enamel paint in all shades on As per attached
new plastered concrete surfaces) - For inner face of crash barrier seprate sheet

31 Providing and casting in situ controlled cement concrete M 30 for kerb

blocks / Median including formwork, curing and finishing complete. As per attached
seprate sheet

32 Fabricating, supply and erecting in position Standard Structural steel

sections conforming to IS 2062 for railing or other works using ISMB, ISA,
ISMC, MS plate, flat, square bars, pipe, square pipe, etc. including
welding, cutting, wastage, etc. complete. The rate is inclusive of
welding road, supply & fixing of correct size nut, bolts, washers,
including one primer coat of red lead paint conforming IS:102 Zinc
chromate paint conforming to IS:104 followed by two coat of As per attached
aluminium paint as per IS:2339 with all contractor's materials, labour, seprate sheet
tools & plants, in bolted/welded construction as directed by Engineer-
in Charge. The waste cut pieces shall Nost be included in the paying
quantity. The work shall be done as per drawing and specification. The
work shall be carried out as per IS:800, IS:816. For Staircase

33 Providing and laying precast RCC footpath slab in controlled cement

concrete of M:25 grade (7 cm thickness including necessary reinf.)
and providing and setting cement chequered tiles in C.M. 1:5 as per As per attached
drawing including necessary formwork, cutting and finishing complete. seprate sheet
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
34 Praviding Parapet of controlled cement concrete M:30 as per detailed
drawing with necessary reinf including shuttering, laying, vibrating and As per attached
finishing to line and level complete. (Cast in Situ) seprate sheet

35 Construction of reinforced earth retaining wall including precast

material of polymer geo grid with reinforcing element of Geo textile As per attached
conforming to as per Specification and filter media materail etc. seprate sheet

36 Granular earth filling in approach portion of RE wall (as per MORTH

section 3100) including laying of earth as per specification for
compaction in 250 mm thick loosed layers & dressing (MORTH
Specification clause 303.3.5) by mechanical means using Motor
grader including watering the earth to bring the earth up to required
As per attached
OMC including rolling with the use of vibratory roller when earth is at
seprate sheet
suitable moisture content with desired field density not less than 97% of
maximum dry density ( Modified Proctor Test). The material for
filling cell conform to IRC Highway Research Board's Special Report No
16.

37 Providing and Casting in situ controlled Cement Concrete M-35 for

R.C.C. Raft and cutt-off walls including necessary shuttering laying, As per attached
vibrating, ramming and curing complete. (A) Footing of RCC seprate sheet
Retaining wall
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
38 Providing and casting in situ controlled cement concrete M-35 for
R.C.C. Retaining wall as per drawings including centering shuttering, As per attached
scaffolding where necessary, laying vibrating, curing and finishing seprate sheet
complete.(A) Height from 0.0 to 5.0 M. (1) RCC Retaining wall
39 Providing and casting in situ controlled cement concrete M-30 for
R.C.C. Drain as per drawings including centering, shuttering, As per attached
scaffolding where necessary, laying, vibrating, curing and finishing seprate sheet
complete.
40 Wrought Iron and Mild Steel Welded Work (Wrought iron and mild steel
welded work) (using angles, square bars, tees and channel grills,
grating frames, gates and tree guards of any size and design etc.
including cost of screens and welding rods or bolts and nuts complete As per attached
fixed in position but without the cost of excavation and concrete for seprate sheet
fixing which will be paid separately) For Grill Opening in SWD

41 Box cutting the road surface to proper slope and camber for making a
base for road work including removing the excavated stuff and As per attached
depositing on the road side slope as directed upto 50m lead. seprate sheet

42 Earthwork for embankment including breaking clods, dressing with all

lead and lift and including watering rolling and consolidation of
subgrade in layers at O.M.C. to required dry density including filling the As per attached
depression which occur during the process using power roller 8t to 10t. seprate sheet
(A) From borrow pits within land width
43 Construction of granular sub-base (Grade III) 200mm thick by
providing coarse graded material BTMC 9.5 mm to 4.75 mm & Coarse
sand , spreading in uniform layers with motor grader on prepared As per attached
surface, mixing by mix in place method with rotavator at OMC, and seprate sheet
compacting with vibratory roller to achieve the desired density,
complete as per MoRTH clause
44 Construction of granular sub-base (Grade I) 200mm thick by providing
coarse graded material BTMC 53 mm to 26.5 mm ,BTMC 26.5 mm to
4.75 mm & Coarse sand , spreading in uniform layers with motor As per attached
grader on prepared surface, mixing by mix in place method with seprate sheet
rotavator at OMC, and compacting with vibratory roller to achieve the
desired density, complete as per MoRTH clause
45 Providing, laying, spreading and compacting graded stone
aggregate to wet mix macadam 250mm thick in layers as per
specification including premixing the Material with water at OMC in
mechanical mix plant carriage of mixed Material by tipper to site, As per attached
laying in uniform layers with paver in sub- base / base course on well seprate sheet
prepared surface and compacting with vibratory roller to achieve the
desired density.
46 Providing and laying Prime coat Emulsion SS1 binder @ rate of 7.5
Kg./10 sq.m. of road surface using Emulsion pressure sprayer etc. As per attached
complete including cost of Emulsion asphalt. seprate sheet
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
47 Providing and applying tack coat with Emulsion RS1 using bitumen
pressure distributor at the rate of 0.30 kg/sqm on the existing As per attached
bituminous surface cleaned with Air Compressor. seprate sheet

48 Providing and laying 25 mm thick mastic asphalt wearing course with

paving grade bitumen meeting the requirements given in table 500-
29, prepared by using mastic cooker and laid to required level and
slope after cleaning the surface, including providing antiskid surface
with bitumen precoated finegrained hard stone chipping of 13.2 mm
As per attached
nominal size at the rate of 0.005cum per 10 sqm and at an
seprate sheet
approximate spacing of 10 cm center to center in both directions,
pressed into surface when the temperature of surfaces is not less than
1000C, protruding 1 mm to 4 mm over mastic surface, all complete as
per clause 515.

49 Providing and laying 110 mm thick Dense Graded Bituminous

Macadam(in two layer) using BT stone chips as per MoRTH gradation
and specification with Bitumen Grade (VG 30) for mixing @ 45.00 Kg
/MT of total Wt. of mix i.e (4.50 % of total weight mix) including tack
coat @ 2.5 kg/10 smt with Bitumen Emulsion (Rapid setting) and
mixing aggregate & asphalt by batch mix plant and spreading the
As per attached
same by sensor paver finisher including rolling & consolidation with 10-
seprate sheet
12 tonne vibratory roller & providing all materials equipment's tools &
plants, fire wood, oil , kerossene,labour charges , using contractor 's
own machinery etc Complete as directed by engineer in charge as
per MoRTH Specification. For Wearing Coat

50 Providing and laying 40 mm thick of compacted Bituminous concrete

using BT aggregate as per MORTH gradation ,specification and
asphalt Grade VG 30 mixing @54.00 Kg /MT of total Wt. of mix i.e.
(5.40% of total weight mix) including heating and mixing aggregate &
asphalt by batch mix plant spreading the same by sensor paver
finisher including rolling & consolidation with 10-12 tonne vibratory As per attached
roller,Tandem Roller ,PTR & providing all materials equipment's tools & seprate sheet
plants, fire wood, oil , kerossene,labour charges , using contractor 's
own machinery etc Complete as directed by engineer in charge as
per MoRTH Specification. For Service Road and Wearing coat
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
51 Road marking with Hot applied thermoplastic paint with refletririzing
glass beads on bitumen surface. Providing and laying of Hot applied
Thermoplastic compound 2.5 mm thick including Reflectorising Glass
Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IRC : 35 & finished surface to be
level, uniform and free from streaks and holes. Zebra patta / Bump
patta lane / center line / edge line /cut patta. The white colour
As per attached
marking should provide liminance cooficient on cement road shall be
seprate sheet
minimum 130 mcd/M2 / LUX and asphalt road shall be min. 100
mcd/M2/ LUX during the service life during the day time. The marking
should meet the performance criteria for night time reflectivity, wet
reflectivity and skid resistance as mentioned in the section 15 of IRC
35:2015 Warranties for retroreflective shall be 2 years.

52 Cat Eye / Road Stud / RPM : supplying raised pavemnt markers made
of polycarbonate & ABS moulded body and reflective pannels with
micro prismatic lense (No glass bead lens) capable of providing total
internal reflection of the lightentering the lens face & self support a
load of 13635 kgs. Tested in accordance to ASTM D, 4280 type H and
complying to spcifications of category A of MORTH circular no. RW/NH
/33023/10-97-DO III Dt. 11.06.1997. The height , width and length shall
not exceeed 20 mm , 130 mm and 130 mm and with minimum
reflective area of 13 sqcm on each side and the slope to the base As per attached
shall be 35+/-5 degree. The strength of detachment of the intrigrated seprate sheet
cylinder shanks (of diameter not less than 19+/-2 mm and height not
less than 30+/-2 mm from the body is to be min. value of 500 kgf. fixing
will be by drilling holes on the road for the shank to go inside with out
nails and using epoxy resin base adhesive as per manufacturers
reccomendations and the colour of the marker should be as per the
IRC 35- 2015 and as directd by engineer - in - charge.

53 Providing and fixing retro Reflective Hi-intensity micro prismatic grade

Board using 2mm alluminium / 4 mm ACP angle iron 75 x 75 x 6mm.
Descaling and degreasing the board as per requirement using epoxy
reflactive process by screen painting as directed etc. complete
including transporting and fixing in C.C. 1:2:4 with necessary
excavation curing etc. complete as per I.R.C. 67-2012 design. A As per attached
waranty for 7 years for the retro reflective sheeting from original seprate sheet
manufacturer and a certified copy of 3 years out door exposure test
report from thord party test lab for the prduct offered shall be
submitted by contractor (B) class B type-4 retro reflective sheeting.
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
54 Cautionary Warning Sign :-Providing and fixing sing boards made out
of 2mm aluminium sheet/ 4 mm ACP size 90 x 90 x 90 cms. equilateral
triangle as per design of IRC-67-2012. Pre treated with phospheting
process & acid etching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint ;reflectorised with retro
refiectivesheeting as per ASTM D-4956 with latest
M.O.S.T.Specifications; 3.6 m long stand post of iron angle of 75 x 75 x
6mm/65 NB circular MS pipe as required and frame fabricated from
suitable size iron angle of 35 X 35 X 3 mm painted with best quality
epoxy coatings in black and white bends. The details of symbol for As per attached
each board shall be as per the instruction of engineer in charge. The seprate sheet
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision
of engineer in charge. A waranty for 7 years for the retro reflective
sheeting from original manufacturer and a certified copy of 3 years
out door exposure test report from thord party test lab for the prduct
offered shall be submitted by contractor (B) class B type-4 retro
reflective sheeting.

55 Regulatory/Mandatory signs :-Providing and fixing sing boards made

out of 2mm aluminium sheet/4mm ACP; size 80 x 60cms. rectangle as
per the design of IRC-67-2012. Pre treated with phospheting process &
acid eching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with High intensity presmatic
grade retro refiective sheeting of type 4 as per ASTM D-4956and latest
M.O.S.T. Specifications;3.6 m long stand post of iron angle of 75 x 75 x
6mm/65 NB circular MS pipe as required and frame fabricated from
suitable size iron angle of 35 X 35 X 3 mm painted with best quality
epoxy coatings in black and white bends. The details of symbol for As per attached
each board shall be as per the instruction of engineer in charge. The seprate sheet
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision
of engineer in charge. A waranty for 7 years for the retro reflective
sheeting from original manufacturer and a certified copy of 3 years
out door exposure test report from thord party test lab for the prduct
offered shall be submitted by contractor (B) class B type-4 retro
reflective sheeting.
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
56 Direction sign (Junction board):-Providing and fixing sign boards made
out of 2mm aluminium sheet/4mm ACP; size 244 X 122 cms.
Rectangular as per the design of IRC-67-2012. Pre treated with
phospheting process & acid eching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint; reflectorised with
High intensity presmatic grade retro refiective sheeting of type 4 as per
ASTM D-4956and latest M.O.S.T. Specifications ; 4.0 mtr.(2 Nos. ) long
stand post of iron angle of 75 x 75 x 6mm/65 NB circular MS pipe as
required and frame fabricated from suitable size iron angle of 50 X 50
X 5 mm painted with best quality epoxy coatings in black and white As per attached
bends. The details of symbol for each board shall be as per the seprate sheet
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x 45 x 60 Cms. for each leg.including excavation,
curing etc.complete under the supervision of engineer in charge. A
waranty for 7 years for the retro reflective sheeting from original
manufacturer and a certified copy of 3 years out door exposure test
report from thord party test lab for the prduct offered shall be
submitted by contractor (B) class B type-4 retro reflective sheeting.

57 Distance Informatory/ Destination sign :Providing and fixing sign boards

made out of 2mm aluminium sheet/4mm ACP; size 180 X 120 cms.
Rectangular as per the design of IRC-67-2012. Pre treated with
phospheting process & acid eching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint; reflectorised with
High intensity presmatic grade retro refiective sheeting of type 4 as per
ASTM D-4956and latest M.O.S.T. Specifications ; 4.0 mtr.(2 Nos. ) long
stand post of iron angle of 75 x 75 x 6mm/65 NB circular MS pipe as
required and frame fabricated from suitable size iron angle of 50 X 50
X 5 mm painted with best quality epoxy coatings in black and white As per attached
bends. The details of symbol for each board shall be as per the seprate sheet
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x 45 x 60 Cms. for each leg.including excavation,
curing etc.complete under the supervision of engineer in charge. A
waranty for 7 years for the retro reflective sheeting from original
manufacturer and a certified copy of 3 years out door exposure test
report from thord party test lab for the prduct offered shall be
submitted by contractor (B) class B type-4 retro reflective sheeting.
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
58 Chevron sign:- Providing and fixing sign boards made out of 1.5 mm
alluminum sheet / 3 mm ACP (Alluminum composite panel) , size 60 X
50 Cm. rectangular as per design of IRC - 67-2012. Pretreated with
phospheting process and acid etching, coated with 1 coat of epoxy
primer and two coats of best quality epoxy paint, reflectorized with
high intensity prismatic grade retroreflective sheeting of type-4 as per
ASTM D-4956 and latest M.O.S.T. specification, 3.3 mtr. long stand post
of iron angle 75 x 75 x 6 mm / 65 NB circular MS pipe as required and
frame fabricated from suitable size iron angle of 35 x 35 x 3 mm,
painted with best quality Epoxy coatings in black & white bends.The As per attached
details of symbol or insciption / Numerals for each boards shall be as seprate sheet
per the instruction of engineer-in-charge. The fixing at site shall in 1:2:4
C.C. block of size 45 X 45 x 60 CM. for each leg including excavation,
curing etc. completed under the supervision of engineer-in-charge. A
waranty for 7 yearss for the retroreflective sheeting from original
manufacturer and a certified copy of three years outdoor exposure
test report from third party test lab for the product offered shall be
submitted by contractor. (A) Class B Type 4 retroreflective sheeting.

59 Providing and fixing pre-cast Rubber Dye inter locking concrete block
60mm thick with grade of concrete M250 pnumatic compressed by
mechanically pressed and as per approved design including 75mm As per attached
Sand layer for levelling and filling the joint with sand in proper line and seprate sheet
level etc complete.For R.E. wall Protection
 Specification Index
Item Applicable
ITEM DESCRIPTION
No. specification reference
60 Providing and fixing marbal slab including engraving and painting As per attached
complete.(i) Size 75cm x 60cm x 4cm. seprate sheet

Dated Signature of Contractor Executive Engineer

R & B Division
Morbi