An Experimental Study On Light Emitting Concrete (Translucent) '
Uploaded by
Dharma banothuAn Experimental Study On Light Emitting Concrete (Translucent) '
Uploaded by
Dharma banothuAN EXPERIMENTAL STUDY ON LIGHT EMITTING
CONCRETE (TRANSLUCENT)’
ABSTRACT
This project deals with the study of light emitting concrete which has the property of
transmitting light from concrete by using optical fibers. Since years concrete has a low
impression because of its dirty greyish color, opaqueness and sharp edge but this concept has
been changed after the development of light emitting concrete, which gives the increased
strength, better looks and light transmitting features. Plastic optical fibers are used because of
its total internal reflection as its working principle as it gives maximum efficiency in
transmitting light. The percentages of optical fiber added in this experimental study are 5%,
10%, 15%. The moulds are casted in a special type of formwork which has slots to place
optical fibers. The moulds are prepared by cement mortar mix and optical fibers embedded in
them alternatively. After the casting process it is left for curing. The strength is determined
by compression test and compared with the conventional concrete. The maximum strength is
obtained at 10% of optical fibers.
This project gives the structure a good aesthetic look without loss of strength parameters and
serves as a eco-friendly building material and is also a energy efficient which reduces energy
consumption by 30% by allowing the natural light by transmitting light through optical fibres
and will also have a good scope in future. This experiment will be a series of initiatives to
look closely at new and emerging advanced construction in future.
