Scribd
Upload
67 views

Configuring "HEC Smart University" On An Android Device

The document provides instructions for configuring the "HEC UAF Smart University" service on an Android device. It outlines 7 steps: 1) access the apps menu, 2) open settings, 3) select WiFi, 4) choose the "HEC UAF Smart University" network, 5) enter credentials using PEAP authentication and supplying username, password and domain, 6) confirm connection to the network, and 7) press home to exit settings. Users are advised to ensure they are in coverage and know their username and password before beginning configuration.

Uploaded by

Ali Hassan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
67 views

Configuring "HEC Smart University" On An Android Device

The document provides instructions for configuring the "HEC UAF Smart University" service on an Android device. It outlines 7 steps: 1) access the apps menu, 2) open settings, 3) select WiFi, 4) choose the "HEC UAF Smart University" network, 5) enter credentials using PEAP authentication and supplying username, password and domain, 6) confirm connection to the network, and 7) press home to exit settings. Users are advised to ensure they are in coverage and know their username and password before beginning configuration.

Uploaded by

Ali Hassan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Configuring “HEC

UAF Smart University” on an Android device

The following instructions are for configuring the “HEC


UAF Smart University” service for generic
Android 5.1.1 (Lollipop), as provided on Google Nexus phones and tablets. Other devices and
Android versions may have slightly different screen layouts or settings and steps. Older versions
of Android like Gingerbread (Android 2.3.x) may have difficulties connecting to “HECUAF Smart
University”.

Before you begin, please ensure:

 You are in a location within the University or affiliated institutions where the “HEC
UAF
Smart University” wireless network is available. If in doubt, please speak to your
local IT support.
 You know your Network Access Username - typically your id (username) followed by
domain “@pern.edu.pk"or “@hec.gov.pk”.
"@uaf.pk" For example, "[email protected]".
"".
 You know your password.

Please follow these steps:

1. From the home screen go to the Apps menu:

2. Find and tap on the Settings application to start it (you may have to swipe several pages
to the right to find it):
3. In the Wireless & networks section at the top, tap Wi-Fi:

4. The Wi-Fi screen will hope and display a list of available networks. Tap “HEC
UAF Smart University”:

UAF Smart University

If you do not see “HEC


UAF Smart University” listed, please move to a location
where “HEC
UAF Smart University” is available. If you are unsure, please speak
to your local IT support staff.

5. You will be prompted to sign in to the wireless network. Enter your credentials as shown
below and tap Connect when complete - note that you may need to scroll down in the
box to see the later options (this is sometimes not obvious):
o EAP Method: PEAP (if you cannot see this option, it might be revealed by
selecting the Show advanced options box at the bottom)
o Phase-2 authentication: MSCHAPV2
o CA certificate: (unspecified)
o Identity: Username [[email protected]]
o Anonymous identity: @pern.edu.pk
o Password: Your Passowrd
o Show password: (you can tick this if you wish to check the password is entered
correctly: it will have no effect on the eventual configuration)
Leave any other options at their default settings.

UAF Smart University

6. You should now be connected to the “HEC


UAF Smart University” network and this
confirmed by the WiFi configuration menu:

UAF

7. Press the Home key underneath the screen to exit Settings and return the main screen.

You might also like