QUESTION BANK 2021

SIDDHARTH INSTITUTE OF ENGINEERING &TECHNOLOGY :: PUTTUR

Siddharth Nagar, Narayanavanam Road – 517583

BIT BANK (Objective)

Subject with Code: INTRODUCTION TO IoT (18EC0449) Course & Branch: B.Tech –EEE,CSE,CSIT
Year &Sem: III-B.Tech& II-Sem Regulation: R18
UNIT –I
INTRODUCTION TO INTERNET OF THINGS
1. Which is not the characteristic of IoT? [ ]
A) Dynamic and Self Adapting B) Self- Configuring
C) No Unique Identity D) Interoperable Communication Protocols
2. Which layer is to determine how the data is physically sent over the network? [ ]
A) Link layer B) Transport layer C) Network layer D) Application
3. The term "Internet of Things" was used by  [ ]
A) Samuel Greengard B) Kevin Ashton
C) Klaus Schwab D) Cuno Pfister
4. On Which year the  Internet of Things was born---- [ ]
A) 2008 B) 2000 C) 1990 D) 2010
5. ----- is a device which detects or measures a physical property and records, indicates, or
otherwise responds to it. [ ]
A) Function generator B) Sensor
C) CRO D) Spectrometer
6. Which type of sensor is used to detect light/dark, break beams, simple object detection? [ ]
A) Thermistor B) LED C) Photocells D) Ultrasonic
7. Which type of sensor is used to detect motion/vibration and orientation? [ ]
A) Ultrasonic B) LED C) Photocells D) Tilt sensors
8. UDP stands for [ ]
A) User Datagram Protocol B) User Data Protocol
C) User Diagram Protocol D) User Defined Protocol
9. Which type of protocol provides end-to-end datagram transmission  [ ]
A) TCP B) IPv6 C) DTLS D) UDP
10. Which of the following is an data type protocol [ ]
A) TCP B) IPv6 C) MQTT D) UDP
11. Which type of protocol defines a full-duplex single socket connection over which messages
can be sent between client and server? [ ]
A) TCP B) IPv6 C) MQTT D) Web Socket
12. The maximum range of Bluetooth is [ ]
A) 100meters B) 10meters C) 10km D) 100km
13. What is the operating frequency range in Bluetooth? [ ]
A) 3.4 B) 2.4 C) 5.4 D) 10.4
14. What is the standard used in ZigBee protocol. [ ]
A) 802.15.4 B) 802.15 C) 802.10.2 D) 802
15. What is the operating frequency range in ZigBee? [ ]
A) 2.4 B) 3.4 C) 5.4 D) 10.4
16. ------ is a wireless technology standard for exchanging data over short distances from
fixed and mobile devices. [ ]
A) Bluetooth B) ZigBee C) Wi-Fi D) None
17. Which of the following is an application of Wi-Fi technology [ ]
A) Fitness trackers B) Hands-free headsets C) key dongles D) Routers
18. Which communication model is a bidirectional, fully duplex communication model
that uses a persistent connection between the client and server? [ ]
A) Push pull B) Request and Response C) Exclusive pair D) Publish and subscribe
19. Which communication model that involves publishers, brokers and consumers. [ ]
A) Push pull B) Request and Response C) Exclusive pair D) Publish and subscribe

INTRODUCTION TO IoT (18EC0449) Page 1

 QUESTION BANK 2021

20.  Which communication model the data producers push the data to queues and the
consumers pull the data from the Queues. [ ]
A) Push pull B) Request and Response C) Exclusive pair D) Publish and subscribe
21. Which communication model the client sends requests to the server and the server
responds to the requests. [ ]
A) Push pull B) Request and Response C) Exclusive pair D) Publish and subscribe
22. The  most popular IoT Communication APIs is ------ [ ]
A) REST-based B) Web Socket-based C) Both A & B D) None
23. URI stands for [ ]
A) Undefined Resource Identifier B) Uniform Resonance Identifier
C) Uniform Resource Identifier D) Uniform Resource Identification
24. Web Socket APIs allows ------ type of communication. [ ]
A) Full duplex B) Half duplex C) Both D) None
25. The most suitable Communication APIs in IoT System is [ ]
A) REST-based B) Web Socket C) Both D) None
26. A WSN consists of -------- [ ]
A) end-nodes B) routers C) coordinator D) All the above
27. Which of the following is an characteristic of Big Data [ ]
A) Volume B) Velocity C) Variety D) All the above
28.  The process of collecting, organizing and analyzing large sets of data is called [ ]
A) Big data B) Embedded system
C) Communication D) Cloud computing
29. In WSN, the device used to collects the data from all the nodes Is called ---- [ ]
A) end-nodes B) routers C) coordinator D) Sensor
30. In WSN, the device used for routing the data packets from end-nodes  to the coordinator [ ]
A) end-nodes B) routers C) coordinator D) Sensor
31. In cloud computing, hardware is provided to user in ----- service [ ]
A) IaaS B) PaaS C) SaaS D) None
32. In cloud computing, in addition to hardware a operating system also provided to user
in ----- service [ ]
A) IaaS B) PaaS C) SaaS D) None
33. Which of the system is a combination of computer hardware and software designed
for a specific function? [ ]
A) Embedded B) Cloud computing C) Big data D) None
34. In which IoT level, the sensed data and analysis data is done in locally. [ ]
A) Level -1 B) Level -2 C) Level -3 D) Level -4
35. In which IoT level, the data analysis is carried out locally and Cloud is used for only
storage purpose. [ ]
A) Level -1 B) Level -2 C) Level -3 D) Level -4
36. In which IoT level, the data analysis and sensed data is stored in cloud [ ]
A) Level -1 B) Level -2 C) Level -3 D) Level -5
37. In which IoT level uses a multiple end nodes and one coordinator. [ ]
A) Level -2 B) Level -4 C) Level -5 D) Level -1
38. In which IoT level, the data analysis and sensed data is stored in cloud with coordinator [ ]
A) Level -2 B) Level -4 C) Level -3 D) Level -5
39. In which IoT level uses a multiple end nodes and centralized controller. [ ]
A) Level -6 B) Level -4 C) Level -3 D) Level -5
40. Which of the following layer provides end -to-end message transfer capability
Independent of the underlying network [ ]
A) Link layer B) Transport layer C) Network layer D) Application

INTRODUCTION TO IoT (18EC0449) Page 2

 QUESTION BANK 2021

UNIT –II
DOMAIN SPECIFIC IoTS
1. Which is not IoT application for smart homes? [ ]
A) Intrusion Detection B) Smart Lighting C) Smoke / Gas Detectors D) None
2. Which of the following IoT application saves energy by sensing human movements
and their environments and controlling the lights accordingly? [ ]
A) Intrusion Detection B) Smart Lighting
C) Smoke / Gas Detectors D) Smart Appliances
3. ------ is an open source automation platform for smart home and building that can
control various appliances using mobile and web applications. [ ]
A) Open Remote B) Open flow C) sensor D) None
4. An open remote contains _____ component [ ]
A) Controller B) Coordinator C) Network D) None
5. Which component allows interacting with devices and controlling them? [ ]
A) Controller B) Designer C) Control Panel D) Coordinator
6. Which component allows to create both configuration for the controller and user
interface designs [ ]
A) Controller B) Designer C) Control Panel D) Coordinator
7. Which component allows to create both configuration for the controller and user
interface designs [ ]
A) Controller B) Designer C) Control Panel D) Coordinator
8. An example of Wireless-enabled and Internet connected lights can be controlled remotely
from IoT applications [ ]
A) Open Remote B) Designer C) web application D) sensor
9. Which of the following application is used for security in home automation? [ ]
A) Intrusion Detection B) Smart Lighting
C) Smoke / Gas Detectors D) Smart Appliances
10. Which type of sensor is used to detect the presence of harmful gases? [ ]
A) Smoke detectors B) Gas detectors C) Pressure sensor D) None
11. Which type of sensor is used to detect smoke that is typically an early sign of fire? [ ]
A) Smoke detectors B) Gas detectors C) Pressure sensor D) None
12. Which technique is used by the smoke detector in home automation [ ]
A) Optical detection B) ionization C) air sampling D) All of the above
13. Which of the following IoT application finds the parking space in the crowded city can
be time-consuming and frustrating [ ]

A) Surveillance B) Smart Lighting C) Structural Health Monitoring D) Smart Parking

14. Which of the following IoT application allows lighting to be dynamically controlled and
also adaptive to ambient conditions? [ ]
A) Surveillance B) Smart Lighting C) Structural Health Monitoring D) Smart Parking
15. Which of the following IoT application provides information on driving conditions, travel
time estimates and alerts in case of poor driving conditions, traffic congestions and accidents? [ ]
A) Smart Roads B) Smart Lighting C) Structural Health Monitoring D) Smart Parking
16. Which type network is used in Cities Structural Health Monitoring application [ ]
A) Internet B) wired C) Wireless sensor D) None
17. What type of technology can track vehicles and adjust traffic lights when there are fewer
or no cars approaching, helping prevent bumper-to-bumper traffic? [ ]
A) Smart Parking B) Smart Lighting C) Structural Health Monitoring D) Smart Roads
18. What type of lighting technology designed for energy efficiency, convenience and security?  [ ]
A) Smart Parking B) Smart Lighting C) Structural Health Monitoring D) Smart Roads
19. Which device is used to monitoring of behavior, activities, or information for the purpose
of information gathering, influencing, managing or directing. [ ]
A) Surveillance B) Smart Lighting C) Structural Health Monitoring D) Smart Parking
20. What types of sensors are used in weather monitoring application? [ ]

INTRODUCTION TO IoT (18EC0449) Page 3

 QUESTION BANK 2021

A) Temperature B) Humidity C) Pressure D) Both A & B

21. Which technology provides predictive information and recommendation s to utilize,
their suppliers, and their customers on how best to manage power. [ ]
A) Prognostics B) Smart grid C) Renewable Energy Systems D) None
22. Smart grid collect the data regarding __________ [ ]
A) Electricity generation B) Electricity consumption C) Storage D) All of the above
23. In power grids, real time information is collected using specialized electrical sensors called _ [ ]
A) Phasor Measurement Units B) Electricity consumption
C) Renewable Energy Systems e D) None
24. Which device is a set of standards for smart-phones and other devices to communicate
with each other by bringing them into proximity. [ ]
A) Bluetooth B) NFC C) RFID D) None
25. NFC maybe used in combination with _______ [ ]
A) Bluetooth B) Sensor C) RFID D) None
26. Which system can improve crop yields while saving water [ ]
A) Smart Vending Machines B) Inventory Management
C) Smart irrigation D) None
27. Which technique is used to track the vehicle in logistics IoT application? [ ]
A) Remote Vehicle Diagnostics B) Fleet Tracking
C) Shipment Monitoring D) None
28. Which type of sensor is used in shipment monitoring systems? [ ]
A) Pressure B) Humidity
C) Temperature D) All of the above
29. Which technique is used to detect faults in the vehicles or warn of impending faults? [ ]
A) Fleet Tracking B) Shipment Monitoring
C) Smart Vending Machines D) Remote Vehicle Diagnostics
30. What type of method that finds solutions to new problems based on past [ ]
A) Inventory Management B) Shipment Monitoring
C) Case-based reasoning D) Fleet Tracking
31. Which technique is used for problem solving in the fields in which it is hard to establish
a quantitative mathematical model, such as machine diagnosis and prognosis [ ]
A) Inventory Management B) Case-based reasoning
C) Fleet Tracking D) None
32. Which device is used to tract the daily exercise and calories burnt [ ]
A) Smart wristbands B) smart glasses
C) Belts D) None
33. Which device allows users to take photos and record videos, get map directions,
check flight status or search internet using voice commands [ ]
A) Smart wristbands B) smart glasses
C) Belts D) None
34. Which device is used to monitor the walking or running speeds and jumps with the
help of embedded sensors? [ ]
A) Smart wristbands B) smart glasses
C) Belts D) Smart shoes
35. Which machine is connected to the Internet allow remote monitoring of inventory levels,
using NFC. [ ]
A) Smart vending B) Inventory Management
C) Fleet Tracking D) Case-based reasoning
36. Which of the following is an example of smart payment? [ ]
A) GPay B) Phonepe C) Paytm D) All of the above
37. Which type of communication technique is used in smart payments? [ ]
A) NFC B) Bluetooth C) Wi-Fi D) None
38. Which type of device is used to track the details of product in Retail Inventory Management? [ ]
A) Actuator B) RFID C) Sensor D) None

39. Which type of sensors is used in Green house control? [ ]

INTRODUCTION TO IoT (18EC0449) Page 4
 QUESTION BANK 2021

A) Soil moisture B) Humidity

C) Temperature D) All of the above
40. Which type of technique is used in Fleet tracking system? [ ]
A) GSM B) Bluetooth
C) Wi-Fi D) None

UNIT –III
IOT AND M2M
1. What type of communication protocols are used in M2M system? [ ]
A) ZigBee B) M-Bus
C) Wireless M-Bus D) All of the above
2. What type of sensor is used in Machine -to-Machine [ ]
A) RFID B) M-Bus C) Wireless M-Bus D) None
3. In a M2M area networks use ______ communication protocols.
A) IP based B) Non-IP based C) Both D) None
4. Which of the following is not a component of M2M system [ ]
A) M2M area networks B) Communication networks
C) M2M gateways. D) Sensor
5. Which component provides control and localization services for data collection in M2M [ ]
A) M2M area networks B) Communication networks
C) M2M gateways. D) None
6. Which of the following is an example of public network used in M2M [ ]
A) Wi-Fi B) Ethernet C) Bluetooth D) None
7. One of the most well-known types of machine-to-machine communication is__ [ ]
A) Wi-Fi B) Ethernet C) Telemetry D) None
8. In M2M, a network operator that provides ____ service [ ]
A) Packed switched B) Ware house C) Good to people D) None
9. The M2M system should be able to continue to function efficiently as more connected
objects are added is called ___ [ ]
A) Anonymity B) Logging C) Scalability D) Delivery methods
10. The M2M system must be able to hide the identity of an M2M device when requested, [ ]
subject to regulatory requirements is called___
A) Anonymity B) Logging C) Scalability D) Delivery methods
11.  M2M systems must support the recording of important events is called ___ [ ]
A) Anonymity B) Logging C) Scalability D) Delivery methods
12. Gateway software should be smart enough to handle ___________ [ ]
A) GPS B) Message C) Logging D) Sensors
13. Number of approaches gateway can be installed? [ ]
A) 2 approaches B) 3 approaches C) 4 approaches D) 5 approaches
14. Gateway provides the connection between _________ and _________ [ ]
A) Cloud and controller B) Network and Cloud
C) Network and Controller D) Controller and device
15. Which of the following is the way in which an IoT device is associated with data? [ ]
A) Internet B) Cloud C) Automata D) Network
16. An IoT network is a collection of ______ devices. [ ]
A) Signal B) M2M C) Interconnected D) Network to Network
17. Which one of the following is not an IoT device? [ ]
A) Amazon voice controller B) Google Home
C) Nest home alarm D) None
18. What is the Arduino UNO? [ ]
A) Software B) Hardware Device C) Network D) Protocol
19. Which one of the following protocols is lightweight? [ ]
A) IP B) HTTP C) MQTT D) CoAP
20.  What is the real example of a smart grid device in IoT? [ ]
A) Mobile phone B) Television C) Smart speaker D) Smart meters
INTRODUCTION TO IoT (18EC0449) Page 5
 QUESTION BANK 2021

21. Which interface does the fingerprint sensor use? [ ]

A) UART Interface B) CoAP interface C) SPI interface D) I2P interface
22. Select open flow controller. [ ]
A) NS3 B) Ryu C) OMNET++ D) Open day light
23. What does data plane do? [ ]
A) Forward the data packet B) Configure the hard ware
C) Send the packet based D) None of them
24. The physical separation of the networking architecture of control plane from the
data plane is called ___ [ ]
A) SDN B) NFC C) APP D) none of them
25. Which network Controller contains a collection of "pluggable" modules that can perform
different network tasks. [ ]
A) APP B) NFC C) SDN D) none of them
26. The protocol used in SDN is ____ [ ]
A) Open flow B) Bluetooth C) Zigbee D) none of them
27.  Which protocol is used to communicate with the applications and services via
Northbound APIs in SDN. [ ]
A) Wi-Fi B) Bluetooth C) Zigbee D) Open flow
28. In NFV, Third layer consists of ____ [ ]
A) Hardware B) Computing resources C) Storage D) Software
29. ____ is a software implementation is a network function which is capable of running
over the NFV infrastructure (NFVI). [ ]
A) SDN B) VNF C) APP D) NFV
30. An automated irrigation mechanism which turns the pumping motor ON and OFF on
detecting the moisture content of the earth without the intervention of human is called ___ [ ]
A) Purpose B) Behavior C) Security D) none of them
31. Who developed the Python language [ ]
A) Zim den B) Guido van Rossum
C) Niene Stom D) Wick Van Roassum
32. In which year was the Python language developed? [ ]
A) 1995 B) 1972 C) 1981 D) 1989
33.  In which language is Python written? [ ]
A) English B) PHP C) C D) All the above
34. Which one of the following is the correct extension of the Python file? [ ]
A) .Py B) .Python C) .P D) None of these
35. Which character is used in Python to make a single line comment? [ ]
A) / B) // C) # D)!
36. What is the method inside the class in python language? [ ]
A) Object B) Function C) Attribute D) Argument
37. Which of the following is not a keyword in Python language? [ ]
A) Val B) Raise C) Try D) With
38. What do we use to define a block of code in Python language? [ ]
A) Key B) Brackets C) Indentation D) None of these
39. Which module is used in python to create Graphics? [ ]
A) Turtle B) Canvas C) Tkinter D) Graphics
40. Which keyword is use for function? [ ]
A) Define B) fun C) def D) function

UNIT-IV

INTRODUCTION TO IoT (18EC0449) Page 6

 QUESTION BANK 2021

IoT PHYSICAL DEVICES & ENDPOINTS

1. The Raspberry Pi is defined as the [ ]

A) Minicomputer B) Micro Computer C) Mega Computer D) Nano Computer
2. Raspberry Pi consists of a _______ quad-core processor or microprocessor. [ ]
A) 16-bit B) 32-bit C) 64-bit D) 128-bit
3. How much RAM, the Raspberry Pi has? [ ]
A) 2 GB RAM B) 1 GB RAM C) 4 GB RAM D) 8 GB RAM
4. Which of the following is a not type of Raspberry Pi? [ ]
A) Raspberry Pi Alternatives B) Raspberry Pi Zero W
C) Raspberry Pi 3 Model B+ D) Raspberry Pi 3 Model A+
5. Which operating system Raspberry Pi has? [ ]
A) Linux B) Open BSD C) Net BSD D) All of the above
6. What is the Ethernet/LAN cable used in R-Pi? [ ]
A) Cat5 B) Cat5e C) Cat 6 D) RJ45
7. Wi-Fi is not present in which of the following models? [ ]
A) Raspberry Pi3 B) Raspberry Pi Zero WH
C) Raspberry Pi Zero W D) Raspberry Pi Zero
8. How many USB ports are present in Raspberry Pi 3? [ ]
A) 5 B) 2 C) 4 D) 3
9. What are the distributions are supported by raspberry Pi? [ ]
A) Arch Linux B) Debain C) Fedora Remix D) All of the above
10. Which instruction set architecture is used in Raspberry Pi? [ ]
A) X86 B) MSP C) AVR D) ARM
11. Does R-Pi have an internal memory? [ ]
A) True B) False
12. Does Raspberry Pi need external hardware? [ ]
A) True B) False
13. ________may be connected either through wired or wireless [ ]
A) Sensors or actuators B) Both sensors & actuators
C) Transmitters D) None of the Above
14. Which of the following is a Local Area Network type [ ]
A) Wi-Fi B) Ethernet
C) Both D) None of the Above
15. which of the following is a Wide Area Network type [ ]
A) GSM B) 5G
C) Both D) None of the Above
16. Raspbian Linux is a ________optimized for Raspberry Pi. [ ]
A) Debian Wheezy port B) Arch Linux port
C) Both A & B D) None of the Above
17. ________ are the Raspberry Pi interfaces. [ ]
A) I2C B) SPI C) Serial D) All of the Above
18. GPIO refers to [ ]
A) General Purpose Interfaces B) General Purpose Interfaces Input
C) General Purpose Interfaces Output D) General Purpose Input Output
19. Which of the following is example for Raspberry Pi [ ]
A) Interfacing LED B) switch with Raspberry
C) Both A & B D) None of the Above
20. WAMP stands for--- [ ]
A) Web Application Messaging Protocol
B) Web socket Application Messaging Procedure
C) Web Application Messaging Procedure
D) Web socket Application Messaging Protocol

INTRODUCTION TO IoT (18EC0449) Page 7

 QUESTION BANK 2021

21. SPI refers [ ]

A) Serial Phase Interface
B) Serial Protocol Interface
C) Serial Peripheral Interface
D) Socket Protocol Interface
22. Raspberry-Pi runs _____ operating system [ ]
A) UNIX B) LINUX C) PYTHON D) All of the Above
23. The Raspberry Pi uses a 32-bit ARM processor [ ]
A) 64-Bit B) 32-Bit C) Both A & B D) None of the Above
24. What do we use to connect TV to R-Pi? [ ]
A) Male HDMIB B) Female HDMIC
C) Male HDMI and Adapter D) Female HDMI and Adapter
25. How power supply is done to R-Pi? [ ]
A) USB connection B) Internal battery
C) Charger D) Adapter
26. Which type of Raspberry Pi has Bluetooth facility? [ ]
A) Raspberry Pi2 model B) Raspberry Pi1 model A
C) Raspberry Pi2 model B+ D) Raspberry Pi3 model A
27. ....... And ....... are main components of raspberry pi. [ ]
A) LED, USB B) USB, HDMI C) LED, HDMI D) USB, POWER
28. What are the parameters that are default values? [ ]
A) Port Name and Bits B) Speed and Port Names
C) Speed and Parity D) Stop bit and Flow Control
29. Which of the following is not the component of IoT Endpoint? [ ]
A) Sensor B) Gateway C) Communication Module D) MCU
30. Python allows _____and _____to files using the file object. [ ]
A) Reading & writing B) writing & reading C) Vice Versa D) Both A & B
31. Inheritance is the process of forming a new class from an _____class. [ ]
A) Base class B) Existing C) Both A & B D) None of the above
32. Raspberry Pi runs on Linux that supports _______ “out of the box”. [ ]
A) UNIX B) LINUX C) PYTHON D) All of the Above
33. _______ is an XBMC media-center distribution for Raspberry Pi. [ ]
A) Raspbian B) RISC OS C) RaspBMC D) All of the Above
34. ________is a fast and user-friendly XBMC media-center distribution [ ]
A) Raspbian B) RISC OS C) RaspBMC D) OpenELEC
35. _______Linux is a _____Linux optimized for Raspberry Pi. [ ]
A) Raspbian & Pidora B) RISC OS & Fedora
C) RaspBMC & Fedora D) Pidora & Fedora OpenELEC
36. Sensors can be either _______the IoT device or attached to the device. [ ]
A) On-board B) System on chip C) Both A & B D) none of the above
37. Raspberry pi comes with a standard ______ Ethernet port. [ ]
A) 45 B) J45 C) RJ45 D) RJ54
38. ________ Port provides both audio & video output for Raspberry pi. [ ]
A) RJ45 B) USB C) HDMI D) All of the Above
39. Raspberry pi has a _______ of audio output jack. [ ]
A) 4.5mm B) 2.5mm C) 3.5 mm D) None of the above
40. ______ Interface can be used to connect LCD panel to Raspberry pi. [ ]
A) CSI B) DSI C) INTERFACES D) Both A & B

INTRODUCTION TO IoT (18EC0449) Page 8

 QUESTION BANK 2021

UNIT –V
CASE STUDIES ILLUSTRATING IoT DESIGN

1. What is the role of big-data in smart grid architecture of IoT? [ ]

A) Store data B) Manage data C) Collect data D) Security
2. What is the role of Cloud in smart grid architecture of IoT? [ ]
A) Store data B) Manage data C) Collect data D) Security
3. What is the role of Gateway in smart grid architecture of IoT? [ ]
A) Store data B) Manage data C) Collect data D) Security
4. What is the role of Sensor in smart grid architecture of IoT? [ ]
A) Store data B) Manage data C) Collect data D) Security
5. IoT gateway must provide __________ [ ]
A) Simple and fast installation B) Security with hardware
C) Data storage D) Protocol abstraction
6. What is the example for smart grid edge device for utility? [ ]
A) Smart Meters B) Smart Home C) Smart Car D) Smart Collage
7. The core element of architecture of smart city is ________ [ ]
A) Mobile Unified Service B) Urban Application Platform
C) Management center D) Integrated Information Provider
8. Which category finds an increase in applications targeting health and fitness? [ ]
A) Personal IoT B) Group IoT C) Community IoT D) Industrial IoT
9. Which category is used in the context of connected cars? [ ]
A) Personal IoT B) Group IoT C) Community IoT D) Industrial IoT
10. Which category could be used by citizens to contribute to a smart city? [ ]
A) Personal IoT B) Group IoT C) Community IoT D) Industrial IoT
11. Smart phones can be used in IoT setup with _________ application categories. [ ]
A) 2 B) 3 C) 4 D) 5
12. What does “smart city” mean to you? [ ]
A) A new buzzword only for rich countries which will soon pass
B) A local authority that uses digital technology as a tool for its sustainable and inclusive
Urban development strategy
C) An automated and data-controlled city made of sensors and servers sold by digital firms.
D) All of the Above
13. Security protection for personal computers includes--- [ ]
A) Internal components B) Software C) All of above D) Locks and cables
14. Smart Lighting system includes ______no. of modes of operation [ ]
A) 3 B) 4 C) 2 D) 5
15. Smart Lighting system includes ______ mode of operation. [ ]
A) Web socket B) REST C) RESTful D) Both B &C
16. Home Automation case study are implemented using _________ [ ]
A) LINUX B) PYTHON C) DJANGO D) Both B &C
17. Home Intrusion detection ________sensor is used to open/close the door. [ ]
A) Door Sensor B) PIR Sensor C) Motion Sensor D) Both B &C
18. Home Intrusion detection system uses _______ frame work for Web application. [ ]
A) LINUX B) PYTHON C) DJANGO D) Both B &C

19. Data on the moisture levels is also collected in ______ storage. [ ]

A) BIG DATA B) CLOUD C) Both A &B D) None of the Above
20. The ______ based application is used for visualizing the data. [ ]
A) BIG DATA B) CLOUD C) Both A &B D) None of the Above
21. The system is based on a ______ IOT deployment with no. of nodes. [ ]
A) LEVEL 4B) LEVEL 3 C) LEVEL 5 D) LEVEL 6
22. Air pollution monitoring nodes are equipped with ________sensors. [ ]
A) CO B) NO2 C) H2O D) Both A &B
23. The controller service calls the ______service to store these measurements in the cloud. [ ]
A) Web socket B) REST C) RESTful D) Both B &C
INTRODUCTION TO IoT (18EC0449) Page 9
 QUESTION BANK 2021

24. The _____ web application is supported by mysql database. [ ]

A) LINUX B) PYTHON C) DJANGO D) Both B &C
25. In ________ sensors are used for each parking slot , to detect whether the slot is empty or [ ]
Occupied.
A) Smart Lighting B) Smart parking C) Smart grid D) None of the above
26. The current states of the room and door are then updated by sending _____ request to the [ ]
Corresponding REST service.
A) GET B) PUT C) PUSH D) PULL
27. Home Intrusion detection system uses_______ level IoT system. [ ]
A) Level 3 B) level 4 C) level 2 D) level 5
28. The _____ view sets of models are included in the views file. [ ]
A) Mode view set B) State view set C) Both A & B D) None of the above
29. The state services used for case study are [ ]
A) Web socket B) REST C) RESTful D) All of above
30. Green house effect consists of toxic gases like____ [ ]
A) CO B) NO2 C) CO2 D) All of above
31. IoT based smart city applications rely on numerous network ________ to accomplish
a fully autonomous environment. [ ]
A) Methodology B) Topology C) Both A &B D) None of the above
32. Most prominent short range wireless technologies include [ ]
A) Zig-Bee B) Bluetooth C) WI-Fi D) All of above
33. Home Automation has ______ range of appliances has been used. [ ]
A) Long Range B) Short Range C) Both A &B D) None of the above
34. Smart irrigation system has been used within the range of network system? [ ]
A) Wi-Fi B) Gi-Fi C) Li-Fi D) None of the above
35. An IoT system has a most commonly used ________ storage system. [ ]
A) Internal Memory B) External Memory
C) Cloud Memory D) All of above
36. ______ is Model-Template-View (MTV) framework. [ ]
A) LINUX B) PYTHON C) DJANGO D) Both B &C
37. XML refers to [ ]
A) Extendable Markup Language B) Extensible Markup Language
C) Extensive Markup Language D) Markup Language
38. JSON refers to [ ]
A) JavaScript Object Notation B) JavaScript Object Notes
C) JavaScript Objective Notation D) None of the above
39. Transport is channel that connects ____ peers. [ ]
A) 3 B) 5 C) 2 D) 4
40. APIs are made up of ____ related elements. [ ]
A) 3 B) 5 C) 2 D) 4

OBJECTIVE PAPER KEY

UNIT-I
INTRODUCTION TO IoT (18EC0449) Page 10
 QUESTION BANK 2021

1 C 2 A 3 B 4 A 5 B 6 C 7 D 8 A 9 B 10 C
1 1 1 1 1 1 1
1 D 2 A 13 B 4 A 5 A 6 A 17 D 8 C 9 D 20 A
2 2 2 2 2 2 2
1 B 2 B 23 C 4 A 5 C 6 D 27 D 8 A 9 C 30 B
3 3 3 3 3 3 3
1 A 2 B 33 A 4 A 5 C 6 D 37 C 8 D 9 A 40 B

UNIT-II

1 D 2 B 3 B 4 A 5 C 6 B 7 A 8 C 9 A 10 B
1 1 1 1 1
A D 13 D 14 B A C 17 D B 19 A 20 D
1 2 5 6 8
2 2 2 2 2
B D 23 A 24 B A C 27 B D 29 D 30 C
1 2 5 6 8
3 3 3 3 3
B A 33 B 34 D A D 37 A B 39 D 40 A
1 2 5 6 8

UNIT-III

1 D 2 A 3 B 4 D 5 C 6 B 7 C 8 A 9 C 10 A
1 1 1 1 1
1 B 2 C 13 B 14 A 5 B 6 C 17 D 8 B 19 B 20 D
2 2 2 2 2
1 A 2 D 23 A 24 A 5 C 6 A 27 D 8 C 29 B 30 A
3 3 3 3 3
1 B 2 D 33 C 34 A 5 C 6 B 37 A 8 C 39 A 40 C

UNIT-IV

1 A 2 C 3 B 4 D 5 D 6 D 7 D 8 C 9 D 10 D
1 1 1 1 1
1 A 2 B 13 A 14 C 5 C 6 A 17 D 8 D 19 C 20 A
2 2 2 2 2
1 C 2 B 23 C 24 C 5 A 6 D 27 A 8 B 29 B 30 A
3 3 3 3 3
1 C 2 C 33 C 34 D 5 D 6 A 37 C 8 C 39 C 40 B

UNIT-V

1 A 2 B 3 C 4 A 5 D 6 A 7 D 8 A 9 B 10 C
1 1 1 1 1
1 C 2 B 13 C 14 B 5 C 6 D 17 D 8 C 19 B 20 B
2 2 2 2 2
1 C 2 D 23 B 24 C 5 B 6 B 27 C 8 C 29 B 30 D
3 3 3 3 3
1 B 2 D 33 C 34 A 5 C 6 C 37 B 8 A 39 C 40 C

INTRODUCTION TO IoT (18EC0449) Page 11