Scribd
Upload
35 views

D-Link Technical Support

Uploaded by

Suporte RZ Informática
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

D-Link Technical Support

Uploaded by

Suporte RZ Informática
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

19/5/2014 D-Link Technical Support

Q: How to set up a SSL VPN on my DSR series router?

A: Step 1: Log into the DSR interface. The default IP address is 192.168.10.1 (eg. https://192.168.10.1)

Step 2: Click the Tools Tab on the top, Click Admin > Remote Management on the left side

Step 3: Enable Remote Management and Click Save Settings

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 1/9
19/5/2014 D-Link Technical Support

Step 4: Click the Advanced Tab on the top, click Users on the left side and select Groups

Step 5: Click Add

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 2/9
19/5/2014 D-Link Technical Support

Step 6: Configure your group:


Name: The Name of the group (ie. Tech Support)
Domain: SSLVPN
Idle Timeout: The Timeout value of the group (eg. 10)

Step 7: Select Users on the left and click Users

Step 8: Click Add

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 3/9
19/5/2014 D-Link Technical Support

Step 9: Create User


Username: username for login (eg. tsmith)
First Name: Users Name (eg. Tom)
Last Name: Users Last Name (eg. Smith)
User Type: SSLVPN
Select Group: created group (ie. Tech Support)
Password: password for VPN login
Confirm Password:
Idle Timeout: The timeout value of the user (eg. 5)

Step 10: Click Setup on the top and VPN Settings>SSL VPN Server>Resources on the left side

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 4/9
19/5/2014 D-Link Technical Support

Step 11: Place a Check next to the SSL VPN Resource and click Configure

Step 12: Configure:


Object Type: Select the Access for SSL User (ie. Single IP or Network)
Object Address: Single IP address or Network (eg. 192.168.10.0)
Mask Length: Netmask of network (eg. 24)
Port Range: Ports that can be accessed by SSL Users
Begin: 0
End: 65535
Note: In this example, SSL VPN users can access the entire 192.168.10.x network and have access to all
ports.

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 5/9
19/5/2014 D-Link Technical Support

Step 13:Click Setup on the top and VPN Settings>SSL VPN Server>SSL VPN Policies on the left side

Step 14: Click Add

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 6/9
19/5/2014 D-Link Technical Support

Step 15: Configure VPN Policy:


Policy For: Select who the policy is for (eg. Group)
Available Groups: Select the Group to apply this policy (eg. Tech Support)
Apply Policy to: Network Resource
Policy Name: Enter name for Policy (eg. SSL VPN)
Define Resources: Your SSL Resource (Eg. SSL) (From Step 9)
Permission: Permit

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 7/9
19/5/2014 D-Link Technical Support

Connecting to the SSL VPN:

Step 1: Open an internet browser


Step 2: Enter the DSR's public/WAN address into the address bar and click Go (eg. https://24.13.31.13)
Step 3: At the DSR Login Screen, enter your SSL Username and Password and click login

Step 4: Click on the VPN Tunnel Tab at the top


Step 5: Click the SSL VPN Icon to launch the installer

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 8/9
19/5/2014 D-Link Technical Support

Once the installer launches it will automatically connect to your SSL VPN.

http://support.dlink.com/ProductInfo.aspx?m=DSR-500N 9/9

You might also like