SPRING CONNECTION :

"A TOP ENTRY CONNECTION"

Functionality through ergonomic design.

- Clearly visible and very easy to install marking ensures circuit identification. All blocks are
aligned in height to retain quick and easy identification if different size/type blocks are used.
- Blocks of the same height are easier/quicker to use regardless of wire sizes.

Maximum space saving is provided by using isolated ferrules.

- 16 AWG (1.5 mm2) wires in a 4 mm (.157") spacing block.
- 14 AWG (2,5 mm²) wires in a 5 mm (.197") spacing block.
- 12 AWG (4 mm²) wires in a 6 mm (.236") spacing block.
- 10 AWG (6 mm²) wires in a 8 mm (.315") spacing block.
- 8 AWG (10 mm²) wires in a 10 mm (.394") spacing block.

Simple, quick, shield continuity.

- A simple and economical accessory ensures shielded wire continuity. This ENTRELEC exclusive
avoids the use of an additional block to connect the shield.

Numerous marking options.

Standard ENTRELEC or customized markers easily snap on top of the block for optional
visibility.
- Up to 8 alphanumeric characters per terminal block, are clear and easy to read.
- Marker cards are also available for side markers allowing a total of 3 characters per terminal
block.

Tests points are standard and do not require additional accessories.

All ENTRELEC blocks can accept a standard 2 mm test plug from instruments for easy field or
factory trouble shooting or circuit monitoring.

ENTRELEC spring block range: convenience first.

Several designed-in features facilitate wiring and connection of accessories. Test sockets are
standard; double sided jumper receptacles allow mixed polarity interconnections.
The unique "reversed" spring design is the key to functionality.
Bipolar jumper design avoids the use of multiple spring blocks (3 or 4 springs) thus saving space
and cost.
 An all-around, all application jumper system.
-snaps on without tools,
-full current carrying capability.
-touch protection exceeds worldwide standards without additional covers,
-jumper combs are easily adapted to the application by simply breaking out unwanted
circuits, no tools required.
Double polarity jumpering with ENTRELEC's exclusive double jumper receptacle.

Typical applications
Connection blocks
2 springs 4 springs

8 terminals, 5 mm spacing 4 terminals, 5 mm spacing

7 distributed circuits 7 distributed circuits

Disconnect terminals
One pole disconnectable Two poles disconnectable

3 normal terminals + 3 disconnect terminals 6 disconnect terminals

3 distributed circuits 3 distributed circuits

Fuse disconnect terminals

One protected pole

2 fuse terminals + 2 terminals with neutral cartridge

2 distributed circuits

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Angled terminal blocks
Feed through and ground
Spring clamp DIN 3

D 2,5/5.I.3L - 2.5 mm² blocks - 5 mm .198" spacing

Characteristics IEC UL CSA

NFC DIN

Wire size Solid 0.12- 4

26-12 AWG 26-12 AWG
mm² / AWG Stranded 0.12 - 2.5
isolated ferrules 0.5 - 2.5
Voltage V 800 600 600
center of rail Current A 24 15 15
Short circuit current (D 2,5/5.I.PI.3L) A/s 300 A/1s
D 2,5/5.I.3L Short circuit current (D 2,5/5.I.P.3L) A/s 300 A/1s
Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG
Wire stripping length mm / inches 9.5 mm / .37" (1) Except for D 2,5/5.I.PI.3L and D 2,5/5.I.P.3L

BADL FEDL5.I.3L Selection

Description Type Order P/N Packaging Weight
kg
Standard block grey D 2,5/5.I.3L 1SNA 399 068 R1700 50
Standard block blue D 2,5/5.I.N.3L 1SNA 399 067 R0600 50
CBD5.2L
Standard block orange D 2,5/5.I.3L 1SNA 399 260 R2000 50
BJDL5.... Ground block yellow/green D 2,5/5.I.PI.3L* 1SNA 399 066 R0500 50
Ground block green/yellow D 2,5/5.I.P.3L** 1SNA 399 072 R0300 50
* Without rail contact - ** With rail contact

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
End section grey FEDL5.I.3L 2.5 mm 1SNA 290 311 R0600 50
orange FEDL5.I.3L 2.5 mm 1SNA 290 314 R0100 50
Assembled jumper bar 2 poles BJDL5.2 24 A (1) 1SNA 291 102 R2300 50
(with IP20 protection) 3 poles BJDL5.3 24 A (1) 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A (1) 1SNA 291 104 R2500 50
center of rail
5 poles BJDL5.5 24 A (1) 1SNA 291 105 R2600 20
10 poles BJDL5.10 24 A (1) 1SNA 291 110 R2600 20
D 2,5/5.I.P.3L
Shielding connector CBD5.2L 0.5 mm (1) 1SNA 291 077 R2400 50

D 2,5/5.I.4L - 2.5 mm² blocks - 5 mm .198" spacing

Characteristics IEC UL CSA

NFC DIN

Wire size Solid 0.12- 4

26-12 AWG 26-12 AWG
mm² / AWG Stranded 0.12 - 2.5
isolated ferrules 0.5 - 2.5
center of rail Voltage V 800 600 600
Current A 24 15 15
D 2,5/5.I.4L Short circuit current (D 2,5/5.I.PI.4L) A/s 300 A/1s
Short circuit current (D 2,5/5.I.P.4L) A/s 300 A/1s
Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG
Wire stripping length mm / inches 9.5 mm / .37" (2) Except for D 2,5/5.I.PI.4L and D 2,5/5.I.P.4L

FEDL5.I.3L

Selection
BADL
Description Type Order P/N Packaging Weight
kg
CBD5.2L
Standard block grey D 2,5/5.I.4L 1SNA 399 071 R0200 50
Standard block blue D 2,5/5.I.N.4L 1SNA 399 070 R1500 50
Standard block orange D 2,5/5.I.4L 1SNA 399 270 R2200 50
Ground block yellow/green D 2,5/5.I.PI.4L* 1SNA 399 069 R1000 50
Ground block green/yellow D 2,5/5.I.P.4L** 1SNA 399 073 R0400 50
* Without rail contact - ** With rail contact

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
center of rail 1SNA 290 311 R0600
End section grey FEDL5.I.3L 2.5 mm 50
orange FEDL5.I.3L 2.5 mm 1SNA 290 314 R0100 50
D 2,5/5.I.P.4L
Shielding connector CBD5.2L 0.5 mm (2) 1SNA 291 077 R2400 50

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Feed through and ground
terminal blocks
Spring clamp DIN 3

D 1,5/4.2L - 1.5 mm² blocks - 4 mm .158" spacing

Characteristics IEC UL CSA

NFC DIN

Wire size Solid 0.12- 2.5

26-16 AWG 26-16 AWG
mm² / AWG Stranded 0.12 - 1.5
isolated ferrules 0.5 - 1
center of rail Voltage V 800 600 600
Current A 18
D 1,5/4.2L Short circuit current (D 1,5/4.PI.2L) A/s 180 A/1s
Short circuit current (D 1,5/4.P.2L) A/s 180A/1s
Rated wire size mm² / AWG 1.5 mm2 16 AWG 16 AWG
Wire stripping length mm / inches 9.5 mm / .37" (1) Except for D 1,5/4.PI.2L and D 1,5/4.P.2L

BADL
Selection
FED5.2L
Description Type Order P/N Packaging Weight
kg
Standard block grey D 1,5/4.2L 1SNA 290 371 R1200 50
SCD5.2L
Standard block blue D 1,5/4.N.2L 1SNA 290 373 R1400 50
Standard block orange D 1,5/4.2L 1SNA 290 372 R1300 50
Ground block yellow/green D 1,5/4.PI.2L* 1SNA 290 380 R1000 50
BJDL4.2
Ground block green/yellow D 1,5/4.P.2L** 1SNA 290 379 R2200 50
CBDS
* Without rail contact - ** With rail contact

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
End section grey FED5.2L 2.5 mm 1SNA 291 061 R2400 20
orange FED5.2L 2.5 mm 1SNA 291 062 R2500 20
Separator orange SCD5.2L 2.5 mm 1SNA 291 352 R0400 20
grey SCD5.2L 2.5 mm 1SNA 291 351 R0300 20
center of rail
Jumper bar 2 poles BJDL4.2 18 A (1) 1SNA 291 642 R0600 50
IP20
D 1,5/4.P.2L
Shielding connector CBDS 0.5 mm (1) 1SNA 291 702 R0400 50

D 1,5/4.4L - 1.5 mm² blocks - 4 mm .158" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 0.12- 2.5

26-16 AWG 26-16 AWG
center of rail mm² / AWG Stranded 0.12 - 1.5
isolated ferrules 0.5 - 1
D 1,5/4.4L
Voltage V 800 600 600
Current A 18
Short circuit current (D 2,5/5.I.PI.4L) A/s 180 A/1s
Short circuit current (D 2,5/5.I.P.4L) A/s 180 A/1s
Rated wire size mm² / AWG 1.5 mm2 16 AWG 16 AWG
FED5.4L
BADL Wire stripping length mm / inches 9.5 mm / .37" (2) Except for D 2,5/5.I.PI.4L and D 2,5/5.I.P.4L

BJDL4.2 Selection
SCD5.4L
Description Type Order P/N Packaging Weight
kg
Standard block grey D 1,5/4.4L 1SNA 290 381 R0500 50
Standard block blue D 1,5/4.N.4L 1SNA 290 383 R0700 50
Standard block orange D 1,5/4.4L 1SNA 290 382 R0600 50
Ground block yellow/green D 1,5/4.PI.4L* 1SNA 290 390 R1200 50
Ground block green/yellow D 1,5/4.P.4L** 1SNA 290 389 R1500 50
* Without rail contact - ** With rail contact
center of rail
Accessories
D 1,5/4.P.4L End stop BADL 9 mm 1SNA 399 903 R0200 50

End section grey FED5.4L 2.5 mm 1SNA 291 041 R2000 20

orange FED5.4L 2.5 mm 1SNA 291 042 R2100 20

Separator orange SCD5.4L 2.5 mm 1SNA 291 372 R0000 20

grey SCD5.4L 2.5 mm 1SNA 291 371 R0700 20
FED5.4L Jumper bar 2 poles BJDL4.2 18 A (2) 1SNA 291 642 R0600 50
SCD5.4L
IP20

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Feed through and protection
terminal blocks
Spring clamp DIN 3

D 2,5/5...L - 2.5 mm² blocks - 5 mm .198" spacing

Characteristics IEC UL CSA

NFC DIN

Wire size Solid 0.12- 4

26-12 AWG 26-12 AWG
mm² / AWG Stranded 0.12 - 2.5
isolated ferrules 0.5 - 2.5
center of rail
Voltage V 800 600 600
D 2,5/5.2L Current A 24 15 15
Short circuit current (D 2,5/5.PI...L) A/s 300 A/1s
Short circuit current (D 2,5/5.P...L) A/s 300 A/1s (1) Only for D 2,5/5....2L
Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG (2) Only for D 2,5/5....3L
Wire stripping length mm / inches 9.5 mm / .37" (3) Only for D 2,5/5....4L

center of rail

D 2,5/5.P.2L

D 2,5/5.2L Selection
Description Type Order P/N Packaging Weight
center of rail kg
Standard block grey D 2,5/5.2L 1SNA 290 021 R2700 50
D 2,5/5.3L
Standard block blue D 2,5/5.N.2L 1SNA 290 023 R2100 50
Standard block yellow D 2,5/5.2L 1SNA 290 027 R2500 50
Standard block orange D 2,5/5.2L 1SNA 290 022 R2000 50
Standard block red D 2,5/5.2L 1SNA 290 024 R2200 50
Standard block black D 2,5/5.2L 1SNA 290 026 R2400 50
Ground block yellow/green D 2,5/5.PI.2L* 1SNA 290 030 R0400 50
Ground block green/yellow D 2,5/5.P.2L** 1SNA 290 029 R0700 50
D 2,5/5.3L Selection
center of rail
Standard block grey D 2,5/5.3L 1SNA 290 031 R2100 50
D 2,5/5.P.3L Standard block blue D 2,5/5.N.3L 1SNA 290 033 R2300 50
Standard block orange D 2,5/5.3L 1SNA 290 032 R2200 50
Ground block yellow/green D 2,5/5.PI.3L* 1SNA 290 040 R1600 50
Ground block green/yellow D 2,5/5.P.3L** 1SNA 290 039 R0100 50
D 2,5/5.4L Selection
Standard block grey D 2,5/5.4L 1SNA 290 011 R2500 50
Standard block blue D 2,5/5.N.4L 1SNA 290 013 R2700 50
Standard block orange D 2,5/5.4L 1SNA 290 012 R2600 50
Ground block yellow/green D 2,5/5.PI.4L* 1SNA 290 020 R0200 50
center of rail Ground block green/yellow D 2,5/5.P.4L** 1SNA 290 019 R0500 50
* Without rail contact - ** With rail contact
D 2,5/5.4L

center of rail Accessories

D 2,5/5.P.4L End stop BADL 9 mm 1SNA 399 903 R0200 50

End section grey FED5.2L 2.5 mm (1) 1SNA 291 061 R2400 20
orange FED5.2L 2.5 mm (1) 1SNA 291 062 R2500 20
grey FED5.3L 2.5 mm (2) 1SNA 291 051 R2200 20
orange FED5.3L 2.5 mm (2) 1SNA 291 052 R2300 20
grey FED5.4L 2.5 mm (3) 1SNA 291 041 R2000 20
BADL orange FED5.4L 2.5 mm (3) 1SNA 291 042 R2100 20
Separator orange SCD5.2L 2.5 mm (1) 1SNA 291 352 R0400 20
FED5...L
grey SCD5.2L 2.5 mm (1) 1SNA 291 351 R0300 20
orange SCD5.3L 2.5 mm (2) 1SNA 291 362 R0600 20
orange SCD5.4L 2.5 mm (3) 1SNA 291 372 R0000 20
SCD5...L
Jumper bar 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
IP20 3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
BJDL5.... 5 poles BJDL5.5 24 A 1SNA 291 105 R2600 20
10 poles BJDL5.10 24 A 1SNA 291 110 R2600 20
CBD5.2L
Shielding connector CBD5.2L 0.5 mm (1) 1SNA 291 077 R2400 50

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Feed through
terminal blocks
Spring clamp DIN 3

D 4/6...L - 4 mm² blocks - 6 mm .238" spacing

Characteristics IEC UL CSA

NFC DIN
center of rail
Wire size Solid 0.2 - 6
24-10 AWG 24-10 AWG
mm² / AWG Stranded 0.2 - 4
D 4/6.2L isolated ferrules 0.5 - 4
Voltage V 800 600 600
Current A 32 25 25
Short circuit current (D 4/6.PI...L) A/s 480 A/1s
Short circuit current (D 4/6.P...L) A/s 480 A/1s (1) Only for D 4/6....2L
Rated wire size mm² / AWG 4 mm2 10 AWG 10 AWG (2) Only for D 4/6....3L
Wire stripping length mm / inches 11 mm / .43" (3) Only for D 4/6....4L
center of rail

D 4/6.P.2L

center of rail

D 4/6.2L Selection
D 4/6.3L
Description Type Order P/N Packaging Weight
kg
Standard block grey D 4/6.2L 1SNA 290 061 R0700 50
Standard block blue D 4/6.N.2L 1SNA 290 063 R0100 50
Standard block orange D 4/6.2L 1SNA 290 062 R0000 50
Ground block yellow/green D 4/6.PI.2L* 1SNA 290 070 R1400 50
Ground block green/yellow D 4/6.P.2L** 1SNA 290 069 R1700 50
center of rail D 4/6.3L Selection
Standard block grey D 4/6.3L 1SNA 290 405 R0600 50
D 4/6.P.3L Standard block blue D 4/6.N.3L 1SNA 290 407 R0000 50
Standard block orange D 4/6.3L 1SNA 290 406 R0700 50
Ground block yellow/green D 4/6.PI.3L* 1SNA 290 408 R1100 50
Ground block green/yellow D 4/6.P.3L** 1SNA 290 409 R1200 50
D 4/6.4L Selection
Standard block grey D 4/6.4L 1SNA 290 410 R0600 50
Standard block blue D 4/6.N.4L 1SNA 290 412 R2400 50
Standard block orange D 4/6.4L 1SNA 290 411 R2300 50
center of rail Ground block yellow/green D 4/6.PI.4L* 1SNA 290 413 R2500 50
Ground block green/yellow D 4/6.P.4L** 1SNA 290 414 R2600 50
D 4/6.4L * Without rail contact - ** With rail contact

center of rail

D 4/6.P.4L

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
End section grey FED5.2L 2.5 mm (1) 1SNA 291 061 R2400 20
BADL orange FED5.2L 2.5 mm (1) 1SNA 291 062 R2500 20
grey FED6.3L 2.5 mm (2) 1SNA 291 694 R2400 20
FED5...L
orange FED6.3L 2.5 mm (2) 1SNA 291 695 R2500 20
grey FED6.4L 2.5 mm (3) 1SNA 291 696 R2600 20
orange FED6.4L 2.5 mm (3) 1SNA 291 697 R2700 20
SCD5.2L
Separator orange SCD5.2L 2.5 mm (1) 1SNA 291 352 R0400 20
grey SCD5.2L 2.5 mm (1) 1SNA 291 351 R0300 20
Jumper bar 2 poles BJDL6.2 32 A 1SNA 291 128 R2400 50
BJDL6.... IP20 3 poles BJDL6.3 32 A 1SNA 291 129 R2500 50
4 poles BJDL6.4 32 A 1SNA 291 194 R1700 50
5 poles BJDL6.5 32 A 1SNA 291 195 R1000 20

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Feed through and ground
terminal blocks
Spring clamp DIN 3

D 6/8.2L - 6 mm² blocks - 8 mm .315" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 0.5 - 10

22-8 AWG 22-8 AWG
mm² / AWG Stranded 0.5 - 6
isolated ferrules 0.5 - 6
center of rail Voltage V 800 600 600
Current A 41 40 40
D 6/8.2L Short circuit current (D6/8.PI.2L) A/s 720 A/1s
Short circuit current (D6/8.P.2L) A/s 720 A/1s
Rated wire size mm² / AWG 6 mm2 8 AWG 8 AWG
Wire stripping length mm / inches 12.5 mm / .49" (1) Except for D 6/8.PI.2L and D 6/8.P.2L

Selection

Description Type Order P/N Packaging Weight

kg
center of rail
Standard block grey D 6/8.2L 1SNA 290 081 R2400 50
D 6/8.P.2L Standard block blue D 6/8.N.2L 1SNA 290 083 R2600 50
Standard block orange D 6/8.2L 1SNA 290 082 R2500 50
Ground block yellow/green D 6/8.PI.2L* 1SNA 290 090 R0100 50
Ground block green/yellow D 6/8.P.2L** 1SNA 290 089 R0400 50
* Without rail contact - ** With rail contact

Accessories
BADL FED8.2L
End stop BADL 9 mm 1SNA 399 903 R0200 50
End section grey FED8.2L 2.5 mm 1SNA 291 161 R2500 20
orange FED8.2L 2.5 mm 1SNA 291 162 R2600 20
Assembled jumper bar 2 poles BJDL8.2 41 A (1) 1SNA 291 122 R1600 50
(with IP20 protection) 3 poles BJDL8.3 41 A (1) 1SNA 291 123 R1700 50
4 poles BJDL8.4 41 A (1) 1SNA 291 144 R2400 50
BJDL8....
5 poles BJDL8.5 41 A (1) 1SNA 291 145 R2500 20

D 10/10.2L - 10 mm² blocks - 10 mm .394" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 0.5 - 16

20-6 AWG 20-6 AWG
mm² / AWG Stranded 0.5 - 10
isolated ferrules
center of rail Voltage V 1000 600 600
Current A 57 50 50
D 10/10.2L Short circuit current (D 10/10.PI.2L) A/s 1200 A/1s
Short circuit current (D 10/10.P.2L) A/s 1200 A/1s
Rated wire size mm² / AWG 10 mm2 6 AWG 6 AWG
Wire stripping length mm / inches 12 mm / .47" (2) Except for D 10/10.PI.2L and D 10/10.P.2L

Selection

Description Type Order P/N Packaging Weight

kg
center of rail
Standard block grey D 10/10.2L 1SNA 290 291 R0300 25
D 10/10.P.2L Standard block blue D 10/10.N.2L 1SNA 290 293 R0500 25
Standard block orange D 10/10.2L 1SNA 290 292 R0400 25
Ground block yellow/green D 10/10.PI.2L* 1SNA 290 300 R2000 25
Ground block green/yellow D 10/10.P.2L** 1SNA 290 299 R1300 25
* Without rail contact - ** With rail contact

Accessories
BADL FED10.2L
End stop BADL 9 mm 1SNA 399 903 R0200 50
End section grey FED10.2L 2.5 mm 1SNA 291 461 R2200 20
orange FED10.2L 2.5 mm 1SNA 291 462 R2300 20
Assembled jumper bar 2 poles BJDL1.10.2 57 A (2) 1SNA 291 472 R2500 50
(with IP20 protection) 3 poles BJDL1.10.3 57 A (2) 1SNA 291 474 R2700 50
4 poles BJDL1.10.4 57 A (2) 1SNA 291 476 R2100 50
BJDL1.10...
5 poles BJDL1.10.5 57 A (2) 1SNA 291 478 R0300 50

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Feed through and ground
terminal blocks
Spring clamp DIN 3

D 16/12.2L - 16 mm² blocks - 12 mm .473" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 0.5 - 25

20-6 AWG 20-6 AWG
mm² / AWG Stranded 0.5 - 16
isolated ferrules
Voltage V 800 600 600
center of rail Current A 76 54 54
Short circuit current (D16/12.PI.2L) A/s 1920 A/1s
D 16/12.2L
Short circuit current (D16/12.P.2L) A/s 1920 A/1s
Rated wire size mm² / AWG 16 mm2 6 AWG 6 AWG
Wire stripping length mm / inches 19 mm / .79" (1) Except for D 16/12.PI.2L and D 16/12.P.2L

Selection

Description Type Order P/N Packaging Weight

kg
center of rail Standard block grey D 16/12.2L 1SNA 399 581 R2700 25
Standard block blue D 16/12.N.2L 1SNA 399 582 R2000 25
D 16/12.P.2L Ground block yellow/green D 16/12.PI.2L* 1SNA 399 583 R2100 25
Ground block green/yellow D 16/12.P.2L** 1SNA 399 584 R2200 25
* Without rail contact - ** With rail contact

Accessories
BADL FED12.2L
End stop BADL 9 mm 1SNA 399 903 R0200 50
End section grey FED12.2L 2.5 mm 1SNA 399 571 R0400 10
blue FED12.2L 2.5 mm 1SNA 399 572 R0500 10
green FED12.2L 2.5 mm 1SNA 399 574 R0700 10
Assembled jumper bar 2 poles BJDL12.2 76 A (1) 1SNA 399 563 R0400 25
BJDL12.2

D 35/16.2L - 35 mm² blocks - 16 mm .630" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 2.5 - 50

14-2 AWG 14-2 AWG
mm² / AWG Stranded 2.5 - 35
isolated ferrules
Voltage V 800 600 600
center of rail Current A 125 93 93
Short circuit current (D 35/16.PI.2L) A/s 4200 A/1s
D 35/16.2L Short circuit current (D 35/16.P.2L) A/s 4200 A/1s
Rated wire size mm² / AWG 35 mm2 2 AWG 2 AWG
Wire stripping length mm / inches 26 mm / 1.02" (2) Except for D 35/16.PI.2L and D 35/16.P.2L

Selection
center of rail
Description Type Order P/N Packaging Weight
kg
D 35/16.P.2L
Standard block grey D 35/16.2L 1SNA 399 617 R0200 10
Standard block blue D 35/16.N.2L 1SNA 399 618 R1300 10
Ground block yellow/green D 35/16.PI.2L* 1SNA 399 619 R1400 10
Ground block green/yellow D 35/16.P.2L** 1SNA 399 620 R1100 10
* Without rail contact - ** With rail contact

BADL

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
Assembled jumper bar 2 poles BJDL16.2 115 A (2) 1SNA 399 621 R0600 25
BJDL16.2
(with IP20 protection)

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Feed through terminal blocks - Double deck
& terminal blocks for sensors/actuators
Spring clamp DIN 3

D 2,5/5.D2.L - 2.5 mm² blocks - 5 mm .198" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 0.12 - 4

26-12 AWG 26-12 AWG
mm² / AWG Stranded 0.12 - 2.5
isolated ferrules 0.5 - 2.5
Voltage V 500 300 300
Current A 20 20 20

Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG

Wire stripping length mm / inches 9.5 mm / .37"

center of rail
Selection
D 2,5/5.D2.L
Description Type Order P/N Packaging Weight
kg
Standard block grey D 2,5/5.D2.L 1SNA 290 161 R0000 50
Standard block blue D 2,5/5.D2.N.L 1SNA 290 163 R0200 50

Accessories
BADL
FEDL5.D.L End stop BADL 9 mm 1SNA 399 903 R0200 50
End section grey FEDL5.D.L 2.5 mm 1SNA 291 441 R2600 20
Assembled jumper bar 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
(with IP20 protection) 3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
BJDL5.... 4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
5 poles BJDL5.5 24 A 1SNA 291 105 R2600 20
10 poles BJDL5.10 24 A 1SNA 291 110 R2600 20

D 2,5/5 C....L - 1.5 mm² blocks - 5 mm .198" spacing

Characteristics IEC UL CSA

NFC DIN

Wire size Solid 0.14 - 2.5

26-16 AWG 26-16 AWG
mm² / AWG Stranded 0.14 - 2.5
center of rail isolated ferrules 0.5 - 2.5
Voltage V 300 300 300
D 2,5/5 C3.L Current A 17.5 10 10

Cde Rated wire size mm² / AWG 1.5 mm2 16 AWG 16 AWG
Wire stripping length mm / inches 9.5 mm / .37"

Selection
Description Type Order P/N Packaging Weight
kg
Standard block grey D 2,5/5 C3L 1SNA 290 350 R2100 50
center of rail
Standard block grey D 2,5/5 C4L 1SNA 290 354 R1100 50
D 2,5/5 C4.L
Cde

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
End sections grey FED5.C3.L 5 mm 1SNA 290 358 R2500 20
grey FED5.C3.L 5 mm 1SNA 290 360 R2300 20
Assembled jumper bar 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
(with IP20 protection) 3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
BADL 5 poles BJDL5.5 24 A 1SNA 291 105 R2600 20
FED5.C....L 10 poles BJDL5.10 24 A 1SNA 291 110 R2600 20

BJDL5...

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Terminal blocks for distribution boxes
Spring clamp
Spring clamp - Spring clamp DIN 3

D 2,5/5... .L - 2,5 mm² closed blocks - 5 mm .198" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 0.14 - 4 mm²

26-12 AWG 26-12 AWG
mm² / AWG Stranded 0.14 - 2.5 mm²
Isolating cover 0.5 - 2.5 mm²
Ground bar (1) 10 x 3 mm
Voltage V 400 V/ 250 V (2) 300 V 300 V
400V (3) (1) For D 2,5/5.NTLP.L only
Pulse kV 6 kV / 4 kV (2) (2) For D 2,5/5.NTLP.L, D 2,5/5.NLP.L, D 2,5/5.LLP.L
6 kV (3)
(3) For D 2,5/5.NL.L and D 2,5/5.LL.L
Rated Current A 20A (1), 24A 20 A 20 A
Short circuit current (2) A/s 300 A/1s (4) Except for D 2,5/5.NTLP.L
2
Rated wire size mm² / AWG 2.5 mm /A2 12 AWG 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"

Selection

Description Type Order P/N Packaging Weight

kg

D 2,5/5.NTLP.L
1 circuit "disconnect neutral" with busbar connection, blue marking
1 circuit "feed-through"
center of rail 1 circuit "ground" connected to the rail, yellow/green marking

Spring block grey V0 D 2,5/5.NTLP.L 1SNA 290 322 R0100 40

D 2,5/5.NTLP.L

D 2,5/5.NLP.L
1 circuit "neutral", blue marking
1 circuit "feed-through"
1 circuit "ground" connected to the rail, yellow/green marking
center of rail

Spring block grey V0 D 2,5/5.NLP.L 1SNA 290 324 R0300 40

D 2,5/5.NLP.L

D 2,5/5.LLP.L

2 circuits "feed-through"
1 circuit "ground" connected to the rail, yellow/green marking
center of rail
Spring block grey V0 D 2,5/5.LLP.L 1SNA 290 326 R0500 40

D 2,5/5.LLP.L

D 2,5/5.NL.L

1 circuit "neutral", blue marking

1 circuit "feed-through"
center of rail
Spring block grey V0 D 2,5/5.NL.L 1SNA 290 330 R1500 40

D 2,5/5.NL.L

D 2,5/5.LL.L

2 circuits "feed-through"

center of rail Spring block grey V0 D 2,5/5.LL.L 1SNA 290 328 R1700 40

D 2,5/5.LL.L Accessories
End stop V0 BADL 9 mm 1SNA 399 903 R0200 50
End section (1) grey V0 FED5.L.A 2,5 mm 1SNA 291 559 R0400 20
End section (3) grey V0 FED5.L.B 2,5 mm 1SNA 291 560 R0100 20
FED5.L.A BADL
Jumper bar orange BJDL5.2 2 poles 1SNA 291 102 R2300 50
IP20 - 24 A BJDL5.3 3 poles 1SNA 291 103 R2400 50
BJDL5.4 4 poles 1SNA 291 104 R2500 50
BJDL5.5 5 poles 1SNA 291 105 R2600 50
FED5.L.B BJDL5... BJDL5.10 10 poles 1SNA 291 110 R2600 50

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Terminal blocks
Spring clamp
Switch for neutral conductor DIN 3

D 2,5/5.NT.L - 2.5 mm² blocks - 5 mm .197" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size (Screw clamp) Solid 0.12 - 4 mm²

mm² / AWG Stranded 0.12 - 2.5 mm²
With isolated ferrule 0.5 - 2.5 mm²
Busbar 10 x 3 mm - .394" x .12"
Voltage V 400 V
Pulse kV 6 kV
Current A 24 A
Rated wire size mm² / AWG 2.5 mm2 / A2
Wire stripping length mm / inches 9.5 mm / .374"

Selection
Description Type Order P/N Packaging Weight
kg
Terminal block, 1 spring
center of rail Switch for neutral conductor
blue D 2,5/5.NT.L 1SNA 290 045 R0700 50

D 2,5/5.NT.L
Accessories
End stop V0 BADL 9 mm 1SNA 399 903 R0200 50
End section grey V0 FED5.2L 2,5 mm 1SNA 291 061 R2400 20
FED5.2L orange V0 FED5.2L 2,5 mm 1SNA 291 062 R2500 20
BADL
Separator orange V0 SCD5.2L 2,5 mm 1SNA 291 352 R0400 20
Jumper bar orange V0 BJDL5.2 2 poles 1SNA 291 102 R2300 50
IP 20 - 24 A BJDL5.3 3 poles 1SNA 291 103 R2400 50
BJDL5.4 4 poles 1SNA 291 104 R2500 50
SCD5.2L BJDL5.5 5 poles 50
1SNA 291 105 R2600
BJDL5.10 10 poles 1SNA 291 110 R2600 50
BJDL5...

D 4/6.NT.L - 4 mm² blocks - 6 mm .236" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size (Screw clamp) Solid 0.2 - 6 mm²

mm² / AWG Stranded 0.22 - 4 mm²
With isolated ferrule 10 x 3 mm - .394" x .12"
Voltage V 400 V
Pulse kV 6 kV
Current A 32 A
Rated wire size mm² / AWG 4 mm2 / A4
Wire stripping length mm / inches 11 mm / .43"

Selection
Description Type Order P/N Packaging Weight
kg
Terminal block, 1 spring
center of rail Switch for neutral conductor
blue D 4/6.NT.L 1SNA 399 586 R2400 50
D 4/6.NT.L

Accessories
End stop V0 BADL 9 mm 1SNA 399 903 R0200 50
End section grey V0 FED6.NL 2,5 mm 1SNA 399 588 R0600 20
FED6.NL BADL Separator orange VRPA1 1SNA 399 587 R2500 20
Jumper bar orange V0 BJDL6.2 2 poles 1SNA 291 128 R2400 50
IP 20 - 32 A BJDL6.3 3 poles 1SNA 291 129 R2500 50
BJDL6.4 4 poles 1SNA 291 194 R1700 50
BJDL6.5 5 poles 1SNA 291 195 R1000 50
VRPA1
BJDL6...

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Terminal blocks
Spring clamp
Switch for neutral conductor DIN 3

D 6/8.NT.L - 6 mm² blocks - 8 mm .315" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size (Screw clamp) Solid 0.5- 10 mm²

mm² / AWG Stranded 0.5 - 6 mm²
Busbar 10 x 3 mm - .394" x .12"
Voltage V 400 V
Pulse kV 6 kV
Current A 41 A
Rated wire size mm² / AWG 6 mm2 / A5
Wire stripping length mm / inches 12.5 mm / .49"

Selection
Description Type Order P/N Packaging Weight
kg

center of rail Terminal block, 1 spring

Switch for neutral conductor
blue D 6/8.NT.L 1SNA 399 589 R0700 50
D 6/8.NT.L

Accessories
End stop V0 BADL 9 mm 1SNA 399 903 R0200 50
End section grey V0 FED8.NL 2,5 mm 1SNA 399 590 R0400 20
FED8.NL BADL
Separator orange VRPA1 1SNA 399 587 R2500 20
Jumper bar orange V0 BJDL8.2 2 poles 1SNA 291 122 R1600 50
IP 20 - 41 A BJDL8.3 3 poles 1SNA 291 123 R1700 50
BJDL8.4 4 poles 1SNA 291 144 R2400 50
BJDL8.5 5 poles 1SNA 291 145 R2500 50
VRPA1
BJDL8...

D 10/10.NT.L - 10 mm² blocks - 10 mm .394" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size (Screw clamp) Solid 0.5 - 16 mm²

mm² / AWG Stranded 0.5 - 10 mm²
With isolated ferrule 10 x 3 mm - .394" x .12"
Voltage V 400 V
Pulse kV 6 kV
Current A 57 A
Rated wire size mm² / AWG 10 mm2 / A6
Wire stripping length mm / inches 12.5 mm / .49"

Selection
Description Type Order P/N Packaging Weight
kg
Terminal block, 1 spring
center of rail
Switch for neutral conductor
blue D 10/10.NT.L 1SNA 399 591 R2100 25
D 10/10.NT.L

Accessories
End stop V0 BADL 9 mm 1SNA 399 903 R0200 50
End section grey V0 FED10.NL 2,5 mm 1SNA 399 592 R2200 20
FED10.NL BADL
Separator orange VRPA1 1SNA 399 587 R2500 20
Jumper bar orange V0 BJDL1.10.2 2 poles 1SNA 291 472 R2500 50
IP 20 - 57 A BJDL1.10.3 3 poles 1SNA 291 474 R2700 50
BJDL1.10.4 4 poles 1SNA 291 476 R2100 50
BJDL1.10.5 5 poles 1SNA 291 478 R0300 50
VRPA1
BJDL1.10...

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email:

D01082 031224 [email protected]
1SNC 160 003 C0205
 Heavy duty switch
Terminal blocks with blade
Spring clamp DIN 3

D 2,5/5.SNBT.2L - 2.5 mm² blocks - 5 mm .200" spacing

Characteristics IEC UL CSA
NFC DIN

Wire size Solid 0.12 - 4

mm² / AWG 26-12 AWG 26-12 AWG
Stranded 0.12 - 2.5
Isolated ferrules 0.5 - 2.5
blade

Voltage V 500 600 600

open

closed

Current A 10 8 8
blade

Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG

Wire stripping length mm / inches 9.5 mm / .37"

Selection
center of rail
Description Type Order P/N Packaging Weight
kg
D 2,5/5.SNBT.2L Standard block grey/orange D 2,5/5.SNBT.2L 1SNA 290 041 R0300 50
Standard block orange D 2,5/5.SNBT.2L 1SNA 290 042 R0400 50

Accessories

BADL End stop BADL 9.0 mm 1SNA 399 903 R0200 50

End section grey FED5.2L 2.5 mm 1SNA 291 061 R2400 20
FED5.2L orange FED5.2L 2.5 mm 1SNA 291 062 R2500 20
Separator end section orange SCD5.2L 2.5 mm 1SNA 291 352 R0400 20
Assembled jumper bar 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
SCD5.2L (with IP20 protection) 3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
5 poles BJDL5.5 24 A 1SNA 291 105 R2600 20
10 poles BJDL5.10 24 A 1SNA 291 110 R2600 20
BJDL5...
Shield connector CBD5.2L 0.5 mm 1SNA 291 077 R2400 50
CBD5.2L

D 2,5/5.SNBT.4L - 2.5 mm² blocks - 5 mm .200" spacing

Characteristics IEC UL CSA

NFC DIN

Wire size Solid 0.12 - 4

mm² / AWG 26-12 AWG 26-12 AWG
Stranded 0.12 - 2.5
Isolated ferrules 0.5 - 2.5
Voltage V 500 600 600
Current A 10 8 8
blade
open

closed
blade

Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG

Wire stripping length mm / inches 9.5 mm / .37"

Selection

center of rail Description Type Order P/N Packaging Weight

kg
D 2,5/5.SNBT.4L
Standard block grey D 2,5/5.SNBT.4L 1SNA 290 133 R2400 50
Standard block grey/orange D 2,5/5.SNBT.4L 1SNA 290 131 R2200 50
Standard block orange D 2,5/5.SNBT.4L 1SNA 290 132 R2300 50
Standard block blue/orange D 2,5/5.SNBT.N.4L 1SNA 290 134 R2500 50

Accessories
BADL
End stop BADL 9 mm 1SNA 399 903 R0200 50

FED5.4L End section grey FED5.4L 2.5 mm 1SNA 291 041 R2000 20
orange FED5.4L 2.5 mm 1SNA 291 042 R2100 20
Separator end section orange SCD5.4L 2.5 mm 1SNA 291 372 R0000 20
Assembled jumper bar 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
SCD5.4L (with IP20 protection) 3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
5 poles BJDL5.5 24 A 1SNA 291 105 R2600 20
BJDL5... 10 poles BJDL5.10 24 A 1SNA 291 110 R2600 20

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Fuse holder terminal blocks for fuses
5x20 mm .197x.787 in. and 5x25 mm .197x.984 in.
Spring clamp DIN 3

D 2,5/8.SFT.2L - 2.5 mm² blocks - 8 mm .315" spacing

Characteristics IEC UL CSA

NFC DIN

Wire size Solid 0.12 - 4

26-12 AWG 26-12 AWG
closed mm² / AWG Stranded 0.12 - 2.5
isolated ferrules 0.5 - 2.5
grip
open
grip

Voltage V 630 600 600

Current A 6.3 8 8
Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"

center of rail Selection

D 2,5/8.SFT.2L Description Type Order P/N Packaging Weight

kg
Standard block grey D 2,5/8.SFT.2L 1SNA 290 091 R2600 50
Standard block orange D 2,5/8.SFT.2L 1SNA 290 092 R2700 50

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
FED8SF.2L End section grey FED8SF.2L 3 mm 1SNA 291 131 R1700 20
BADL
orange FED8SF.2L 3 mm 1SNA 291 132 R1000 20
Assembled jumper bar 2 poles BJDL8.2 24 A 1SNA 291 122 R1600 50
(with IP20 protection) 3 poles BJDL8.3 24 A 1SNA 291 123 R1700 50
4 poles BJDL8.4 24 A 1SNA 291 144 R2400 50
5 poles BJDL8.5 24 A 1SNA 291 145 R2500 20
BJDL8...

D 2,5/8.S...T.2L - 2.5 mm² blocks - 8 mm .315" spacing

closed

Characteristics IEC UL CSA

grip
open

NFC DIN
grip

Wire size Solid 0.12 - 4

26-12 AWG 26-12 AWG
mm² / AWG Stranded 0.12 - 2.5
isolated ferrules 0.5 - 2.5
Voltage V 630 600 600 (1) Blown fuse indicator with neon lamp 110 V - 220 V
Current A 6.3 8 8 (2) Blown fuse indicator with LED 24 V
center of rail (3) Blown fuse indicator with LED 48 V
Rated wire size mm² / AWG 2.5 mm2 12 AWG 12 AWG
D 2,5/8.SF...T.2L Wire stripping length mm / inches 9.5 mm / .37"
closed

Selection
grip
open
grip

Description Type Order P/N Packaging Weight

kg
Block with test socket (1) grey D 2,5/8.SFLT.2L 1SNA 290 093 R2000 50
Block with test socket (2) grey D 2,5/8.SFDT.2L 1SNA 290 094 R2100 50
Block with test socket (3) grey D 2,5/8.SFD1T.2L 1SNA 290 095 R2200 50
center of rail Block with test socket
grey body/blue lever D 2,5/8.SNT.2L 1SNA 290 097 R2400 50
D 2,5/8.SNT.2L

Accessories
End stop BADL 9 mm 1SNA 399 903 R0200 50
BADL
End section grey FED8SF.2L 3 mm 1SNA 291 131 R1700 20
orange FED8SF.2L 3 mm 1SNA 291 132 R1000 20
FED8SF.2L
Assembled jumper bar 2 poles BJDL8.2 24 A 1SNA 291 122 R1600 50
(with IP20 protection) 3 poles BJDL8.3 24 A 1SNA 291 123 R1700 50
4 poles BJDL8.4 24 A 1SNA 291 144 R2400 50
BJDL8...
5 poles BJDL8.5 24 A 1SNA 291 145 R2500 20

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Miniblocks
Spring clamp
DIN 3 DIN 2 Base mount (snap-in or brackets)
With an overall width of 33 mm, the mini blocks offer 2 connections with a 5 mm spacing and
4 connections with a 10 mm spacing.

Mini blocks designed for interconnection :

Entrelec Mini blocks all have built-in interconnection facilities, so the connection terminals are
reserved for connecting conductors.

6 terminals at the same voltage 8 terminals at the same voltage

Optimal connection capacity

2.5 mm² (14 AWG) with
Conventional solution ABB Entrelec solution Conventional solution ABB Entrelec solution
an insulated ferrule,
in 5 mm spacing.

Numerous marking options :

- on the top of the blocks a marking card (up to 4 characters)
- an additional marking card (up to 4 characters) on each side of the blocks, to comply with specific
requirements.

DIN 3 rail mounted DIN 2 rail mounted

DS 2,5/5.2L or DS 2,5/10.4L DR 2,5/5.2L or DR 2,5/10.4L

Mounting on DIN 3 rail

Panel mounted
Clip-on : DH 2,5/5.2L or DH 2,5/10.4L With flanges : DB 2,5/5.2L or DB 2,5/10.4L
Spacing : Spacing : Spacing :
or or or

or
Mounting on DIN 2 rail

N blocks

Drilling L = (N blocks x 5.05) + (N blocks x 10)

N blocks = 8 blocks max. 5 mm spacing
(panel thickness : 0,6 to 1,2 mm 4 blocks max. 10 mm spacing Drilling
.024" to .047")
DIA. 2 holes DIA. 3.2 for 3 mm screw with cylindrical head
(not supplied)
DIA.

or or
or

or

L = (N blocks x 5.05) + (N blocks x 10)

* For 10 mm blocks, mount a DH block

every 4 blocks.
* For 5 mm blocks, mount a DH block
every 8 blocks.

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Miniblocks
Spring clamp
Spring clamp DIN 3

DS 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springs

Characteristics IEC UL/CSA
NFC DIN

Solid 0.12 - 4 mm²(1)

Wire size 26-12 AWG
Stranded 0.12 - 2.5 mm²
mm² / AWG
Isolated ferrule 0.5 - 2.5 mm² (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Voltage V 800 V 600 V comply with IEC 947-1 standard : rated wire size 1 to
Pulse kV 8 kV 2,5 mm². However, these blocks can be connected to
Rated Current A 24 A 15 A
4 mm² solid wires.
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"

Selection
center of rail Description Type Order P/N Packaging Weight
kg
2 spring miniblocks grey DS 2,5/5.2L 1SNA 290 221 R0400 100
orange DS 2,5/5.2L 1SNA 290 222 R0500 100
DS 2,5/5.2L blue DS 2,5/5.N.2L 1SNA 290 223 R0600 100

Accessories
End section grey V0 FED1.L 1.5 mm 1SNA 291 301 R0200 20
FED1.L FED1.L 1.5 mm 1SNA 291 302 R0300 20
orange V0
Jumper bar orange V0
IP 20 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
5 poles BJDL5.5 24 A 1SNA 291 105 R2600 50
10 poles BJDL5.10 24 A 1SNA 291 110 R2600 50

BJDL5...

DS 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs

Characteristics IEC UL/CSA
NFC DIN

Solid 0.12 - 4 mm²(1)

Wire size 26-12 AWG
Stranded 0.12 - 2.5 mm²
mm² / AWG
Isolated ferrule 0.5 - 2.5 mm² (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Voltage V 800 V 600 V comply with IEC 947-1 standard : rated wire size 1 to
Pulse kV 8 kV 2,5 mm². However, these blocks can be connected to
Rated Current A 24 A 15 A 4 mm² solid wires.
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"

Selection
center of rail
Description Type Order P/N Packaging Weight
kg
4 spring miniblocks grey DS 2,5/10.4L 1SNA 290 231 R0600 100
orange DS 2,5/10.4L 1SNA 290 232 R0700 100
DS 2,5/10.4L blue DS 2,5/10.N.4L 1SNA 290 233 R0000 100

Accessories
FED1.L
End section grey V0 FED1.L 1.5 mm 1SNA 291 301 R0200 20
orange V0 FED1.L 1.5 mm 1SNA 291 302 R0300 20

Jumper bar orange V0

IP 20 2 poles BJDL10.2 24 A 1SNA 291 322 R2600 50
3 poles BJDL10.3 24 A 1SNA 291 323 R2700 50
4 poles BJDL10.4 24 A 1SNA 291 324 R2000 20
BJDL10... 5 poles BJDL10.5 24 A 1SNA 291 325 R2100 20

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Feed through
Miniblocks
Spring clamp DIN 2

DR 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springs

DR 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs
Characteristics IEC UL/CSA
NFC DIN

Solid 0.12 - 4 mm²(1)

Wire size 26-12 AWG
Stranded 0.12 - 2.5 mm²
mm² / AWG
Isolated ferrule 0.5 - 2.5 mm² (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Voltage V 800 V 600 V comply with IEC 947-1 standard : rated wire size 1 to
center of rail
Pulse kV 8 kV
2,5 mm². However, these blocks can be connected to
Rated Current A 24 A 15 A
4 mm² solid wires.
Short circuit current (DR 2,5/...PI...L) A/s 300 A/s
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
DR 2,5/5.2L
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"

Selection

Description Type Order P/N Packaging Weight

kg
2 spring miniblocks grey DR 2,5/5.2L 1SNA 290 201 R1100 100
orange DR 2,5/5.2L 1SNA 290 202 R1200 100
blue DR 2,5/5.N.2L 1SNA 290 203 R1300 100
center of rail Ground block yellow body/
green marking (without rail contact) DR 2,5/5.PI.2L 1SNA 290 250 R2500 100
4 spring miniblocks grey DR 2,5/10.4L 1SNA 290 211 R0200 100
orange DR 2,5/10.4L 1SNA 290 212 R0300 100
blue DR 2,5/10.N.4L 1SNA 290 213 R0400 100
DR 2,5/10.4L Ground block yellow body/
green marking (without rail contact) DR 2,5/10.PI.4L 1SNA 290 260 R2700 100

Accessories
End stop BADRL 6,5 mm 1SNA 199 420 R2100 50
End section V0 grey FED1.L 1.5 mm 1SNA 291 301 R0200 20
orange FED1.L 1.5 mm 1SNA 291 302 R0300 20
BADRL
FED1.L Jumper bar orange
IP 20 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
(for DR 2,5/5.2L) 3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
5 poles BJDL5.5 24 A 1SNA 291 105 R2600 50
10 poles BJDL5.10 24 A 1SNA 291 110 R2600 50
BJDL5... Jumper bar orange
BJDL10...
IP 20 2 poles BJDL10.2 24 A 1SNA 291 322 R2600 50
(for DR 2,5/10.4L) 3 poles BJDL10.3 24 A 1SNA 291 323 R2700 50
4 poles BJDL10.4 24 A 1SNA 291 324 R2000 20
5 poles BJDL10.5 24 A 1SNA 291 325 R2100 20

DR 2,5/10.P.4L - 2.5 mm² protection miniblock - 10 mm .394" spacing - 4 springs

Characteristics IEC UL/CSA
NFC DIN

Wire size 0.12 - 4 mm²(1) (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Solid
26-12 AWG comply with IEC 947-1 standard : rated wire size 1 to
mm² / AWG Stranded 0.12 - 2.5 mm²
2,5 mm². However, these blocks can be connected to
Short-circuit current A/s 300 A / 1 s.
4 mm² solid wires.
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"
center of rail
Selection

Description Type Order P/N Packaging Weight

kg
4 spring protection miniblock,
DR 2,5/10.P.4L green body / yellow marking DR 2,5/10.P.4L 1SNA 290 219 R1200 100
connected to the mounting rail

Accessories
End section V0 grey FED1.L 1.5 mm 1SNA 291 301 R0200 20
orange FED1.L 1.5 mm 1SNA 291 302 R0300 20

FED1.L Other mounting : DIN 3 and base mount

(snap-in or brackets) : Consult us

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Miniblocks
Spring clamp
Base mount with snap in mounting foot

DH 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springs

Characteristics IEC UL/CSA
NFC DIN

Solid 0.12 - 4 mm²(1)

Wire size 26-12 AWG
Stranded 0.12 - 2.5 mm²
mm² / AWG
Isolated ferrule 0.5 - 2.5 mm² (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Voltage V 800 V 600 V comply with IEC 947-1 standard : rated wire size 1 to
Pulse kV 8 kV 2,5 mm². However, these blocks can be connected to
Rated Current A 24 A 15 A
4 mm² solid wires.
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"

Selection

Description Type Order P/N Packaging Weight

kg
2 spring miniblocks grey DH 2,5/5.2L 1SNA 290 261 R1400 100
orange DH 2,5/5.2L 1SNA 290 262 R1500 100
DH 2,5/5.2L blue DH 2,5/5.N.2L 1SNA 290 263 R1600 100

Accessories
End section grey V0 FED1.L 1.5 mm 1SNA 291 301 R0200 20
FED1.L FED1.L 1.5 mm 1SNA 291 302 R0300 20
orange V0
Jumper bar orange V0
IP 20 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
5 poles BJDL5.5 24 A 1SNA 291 105 R2600 50
10 poles BJDL5.10 24 A 1SNA 291 110 R2600 50

BJDL5...

DH 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs

Characteristics IEC UL/CSA
NFC DIN

Solid 0.12 - 4 mm²(1)

Wire size 26-12 AWG
Stranded 0.12 - 2.5 mm²
mm² / AWG
Isolated ferrule 0.5 - 2.5 mm² (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Voltage V 800 V 600 V comply with IEC 947-1 standard : rated wire size 1 to
Pulse kV 8 kV 2,5 mm². However, these blocks can be connected to
Rated Current A 24 A 15 A 4 mm² solid wires.
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"

Selection

Description Type Order P/N Packaging Weight

kg
4 spring miniblocks grey DH 2,5/10.4L 1SNA 290 271 R1600 100
DH 2,5/10.4L orange DH 2,5/10.4L 1SNA 290 272 R1700 100
blue DH 2,5/10.N.4L 1SNA 290 273 R1000 100

Accessories
FED1.L
End section grey V0 FED1.L 1.5 mm 1SNA 291 301 R0200 20
orange V0 FED1.L 1.5 mm 1SNA 291 302 R0300 20

Jumper bar orange V0

IP 20 2 poles BJDL10.2 24 A 1SNA 291 322 R2600 50
3 poles BJDL10.3 24 A 1SNA 291 323 R2700 50
4 poles BJDL10.4 24 A 1SNA 291 324 R2000 20
BJDL10... 5 poles BJDL10.5 24 A 1SNA 291 325 R2100 20

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]
 Miniblocks
Spring clamp
Base mount with flanges

DB 2,5/5.2L - 2.5 mm² miniblocks - 5 mm .197" spacing - 2 springs

Characteristics IEC UL/CSA
NFC DIN

Solid 0.12 - 4 mm²(1)

Wire size 26-12 AWG
Stranded 0.12 - 2.5 mm²
mm² / AWG
Isolated ferrule 0.5 - 2.5 mm² (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Voltage V 800 V 600 V comply with IEC 947-1 standard : rated wire size 1 to
Pulse kV 8 kV 2,5 mm². However, these blocks can be connected to
Rated Current A 24 A 15 A
4 mm² solid wires.
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"

Selection

Description Type Order P/N Packaging Weight

kg
2 spring miniblocks grey DB 2,5/5.2L 1SNA 290 241 R1000 100
orange DB 2,5/5.2L 1SNA 290 242 R1100 100
DB 2,5/5.2L blue DB 2,5/5.N.2L 1SNA 290 243 R1200 100

FEDB.L
Accessories
End section kit grey V0 FEDB.L 1.5 mm 1SNA 290 281 R0100 20
(right + left) orange V0 FEDB.L 1.5 mm 1SNA 290 282 R0200 20

Jumper bar orange V0

IP 20 2 poles BJDL5.2 24 A 1SNA 291 102 R2300 50
3 poles BJDL5.3 24 A 1SNA 291 103 R2400 50
4 poles BJDL5.4 24 A 1SNA 291 104 R2500 50
5 poles BJDL5.5 24 A 1SNA 291 105 R2600 50
10 poles BJDL5.10 24 A 1SNA 291 110 R2600 50

BJDL5...

DB 2,5/10.4L - 2.5 mm² miniblocks - 10 mm .394" spacing - 4 springs

Characteristics IEC UL/CSA
NFC DIN

Solid 0.12 - 4 mm²(1)

Wire size 26-12 AWG
Stranded 0.12 - 2.5 mm²
mm² / AWG
Isolated ferrule 0.5 - 2.5 mm² (1) Spring miniblocks 5 mm spacing (DR 2,5/5.2L)
Voltage V 800 V 600 V comply with IEC 947-1 standard : rated wire size 1 to
Pulse kV 8 kV 2,5 mm². However, these blocks can be connected to
Rated Current A 24 A 15 A 4 mm² solid wires.
Rated wire size / Gauge mm² / AWG 2.5 mm2/A2 12 AWG
Wire stripping length mm / inches 9.5 mm / .37"
Recommended screwdriver mm / inches 3.5 mm / .14"

Selection

Description Type Order P/N Packaging Weight

kg
4 spring miniblocks grey DB 2,5/10.4L 1SNA 290 251 R1200 100
DB 2,5/10.4L orange DB 2,5/10.4L 1SNA 290 252 R1300 100
blue DB 2,5/10.N.4L 1SNA 290 253 R1400 100

FEDB.L

Accessories
End section kit grey V0 FEDB.L 1.5 mm 1SNA 290 281 R0100 20
(right + left) orange V0 FEDB.L 1.5 mm 1SNA 290 282 R0200 20

Jumper bar orange V0

IP 20 2 poles BJDL10.2 24 A 1SNA 291 322 R2600 50
3 poles BJDL10.3 24 A 1SNA 291 323 R2700 50
4 poles BJDL10.4 24 A 1SNA 291 324 R2000 20
5 poles BJDL10.5 24 A 1SNA 291 325 R2100 20

BJDL10...

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]