Scribd
Upload
268 views1 page

KV2 12 Inch

This document provides specifications for the VHD2.0 active driven speaker, including performance details, component descriptions, dimensions, and requirements for use with a KV2 Audio VHD2000 amplifier. It lists maximum volume levels, frequency response ranges, amplifier power needs for highs, mids and lows, driver materials and sizes, coverage angles, input type and physical dimensions.

Uploaded by

Manek Taolin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
268 views1 page

KV2 12 Inch

This document provides specifications for the VHD2.0 active driven speaker, including performance details, component descriptions, dimensions, and requirements for use with a KV2 Audio VHD2000 amplifier. It lists maximum volume levels, frequency response ranges, amplifier power needs for highs, mids and lows, driver materials and sizes, coverage angles, input type and physical dimensions.

Uploaded by

Manek Taolin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VHD2.

0
ACTIVE DRIVEN SPEAKER

OPERATOR INSTRUCTIONS
This Active driven speaker must only be used in conjunction
with a KV2 Audio VHD2000 amplifier.
Please refer to the VHD2000 and VHD3200 manuals for
precise system set up and operating instructions.

System Acoustic Perfomance


Max SPL Long-term 139dB (144dB two VHD 2.0’s)
Max SPL Peak 142dB (147dB two VHD 2.0’s)
-3dB Response 100Hz ÷ 22kHz
-10dB Response 85Hz ÷ 30kHz
Full Range mode -3dB Response 60Hz ÷ 22kHz
Crossover Point 100Hz, 450Hz, 2.2kHz

High Frequency Section


Acoustic Design Horn Loaded
High Horn Coverage Horizontal / Vertical 80° x 40° / 80° x 10° (2x VHD 2.0's)
High Frequency Amplifier Requirement 200W (VHD2000 amp.)
Throat Exit Diameter / Diaphragm Size 1.4” / 3.0”
Diaphragm Material Nitride Titanium
Magnet Type Neodymium

Mid Range Section


Acoustic Design Horn Loaded
Mid Horn Coverage Horizontal / Vertical 80° x 40° / 80° x 10° (2x VHD 2.0's)
Midrange Amplifier Requirement 600W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design 2x 8" / 3.0" / Trans Coil
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium

Mid-Bass Section
Acoustic Design Horn Loaded
Mid-bass Amplifier Requirement 1200W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design 2x 12" / 3" / Inside Outside
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium

Speaker Input
Speaker Input EP6

Cabinet
Cabinet Material Baltic birch
Handles 6
Color "Orange peeled" Matt Black
or any RAL

Physical Dimensions Product Number:


KVV 987 077 - VHD2.0 R (right)
Height 933mm (36.72")
KVV 987 078 - VHD2.0 L (left)
Width 700mm (27.55")
Depth 495mm (19.48")
Weight 70kg (154.0lbs)

Amplification and control


Amplification and control VHD2000 KV2 Audio
AMPLIFICATION AND CONTROL REQUIREMENTS
Nádražní 936
Milevsko, 399 01
Czech Republic

Tel: +44 (0) 1423 816 868


www.kv2audio.com
KVV120023-00-02-0

You might also like