ASSEMBLY INSTRUCTION

WARDROBE

Set Up 2

Basic Construction Step 1-2 3

Basic Construction Step 3-6 4

Installing Shelves (7-8) // Optional Doors (9-10) 5

Optional Doors (11) // Optional Drawers (12-14) 6

Optional Inner Drawers (15-18) 7

Optional Clothes Rail, Extendable Coat Hanger, Garment Lift 8

Sliding Doors (1-2) 9

Sliding Doors (3) 10

Sliding doors (4) 11

Pickawood_AssemblyInstruction_Wardrobe_07_2018_ENG, 07.06.2018

1
Set Up
Sort the different parts of furniture and the small pieces. Find the required tools.

Shelf, top panel and Eccentric connector Screws Shelf clip for hole strips
bottom panel
connector

Door hinge Drawer guide rails Back panel

● Sort through the individual components of your particular model. For example: Base, sides, bottom

⚠ Depending on your order, your delivery might not include all the pieces depicted above.

2
Basic Construction Step 1-2

Basic Construction scheme – Column by column

Place bottom panel → attach side panel → slot in the rear panel → attach the center panel → put on the
top panel

Step 1: Connecting the base Step 2: Placing the bottom panel

Use eccentric connectors to mount the base to the Place the bottom panel and the base between at
bottom panel. side panels and fasten them with a half turn in
counter clockwise direction (CCW) from above.

3
Basic Construction Step 3-6

Step 3: Inserting the back panel Step 4: Inserting the middle panel

Slot the back panel into the provided groove. Using eccentric connectors, attach the middle panel
to the base panel while also slotting the back panel
into the groove on the side panel.

Step 5: Attaching the top panel Step 6: Fasten back panel

Place the top panel between the sides and slot the Place the back panel elbows in the groove and fix
back panel into the groove provided on the top them with the screwdriver.
panel. Attach the top panel with a half turn in
clockwise direction on the shelf connector.
⚠​ ​Note​: ​for built-in furniture the connectors
can be fixed at the front side of the wardrobe
(inside of the compartments)!

4
Installing Shelves (7-8) // Optional Doors (9-10)

Step 7: Inserting the shelves Step 8: Shelves + Hole Strips

The shelves should be inserted one at a time and If the side panels have provided hole strips, simply
secured with half a turn in clockwise direction (CW) insert the shelf clips at the desired height and place
of the connector. the shelves on top. Fasten the shelves, just like in
step 7.

Step 9: Installing the doors Step 10: Snap in the door hinges

Screw the door hinges on at the top and bottom of Attach the adapter plate to the side panel and snap
the doors in the door hinge.

5
Optional Doors (11) // Optional Drawers (12-14)

Step 11: Doors, Soft close Step 12: Inserting drawers

The closing speed of the doors can be changed by Use the pre-drilled holes to fasten the drawer guide
adjusting the intensity of the soft close mechanism. rails to both side panels. Insert the drawers.
⚠​ ​Hinges with soft close mechanism are
uniquely provided for doors with handles.

Step 13: Height Adjustment Step 14: Front Adjustment

The tool-free height adjustment option guarantees Loosen the screws on the drawer front by using a
a consistent drawer joint front and allows a height screwdriver, readjust the position of the front and
compensation up to 3 mm. fasten screws.

6
Optional Inner Drawers (15-18)

Step 15: Installing the spacer Step 16: Installing the inner panels

Install the spacer bar on the inner side panels, Knock the wooden dowels into the lower support
using the eccentric connectors. panel such as in the upper side of the inner side
panels. Place inner side panels.

Step 17: Installing the shelves Step 18: Installing the drawers

Snap the shelves into the side panels using a base Install the drawer guide rails and drawers like in
panel connector. step 12.

7
Optional Clothes Rail, Extendable Coat Hanger, Garment
Lift

Installing the clothes rail Extendable coat hanger

Loosen the grub screws on the brackets. Install one Screw on the extendable coat hanger at the
of the brackets. Insert the clothes rail and install indicated position on the shelf.
second bracket then tighten the grub screws again.

Garment lift

Unfold the pre-installed lateral branches, place the

8
Sliding Doors (1-2)

Step 1: Installing sliding doors

Exemplary presentation of a 3-door wardrobe (one sliding door in the front and two sliding doors running
behind it).

Step 2: Mounting the sliding doors

Mount each sliding door into the upper guide rail (rear sliding door in the front guide rail, front sliding door in
the rear guide rail).

9
Sliding Doors (3)

Step 3: Securing sliding doors

Wardrobe/Door Bottom

Interlock front sliding door / above Interlock rear sliding door / above

Insert the lower guide roller into the guide rail, then activate the safety catch on the upper guide roller.

10
Sliding doors (4)

Step 4: Adjusting the sliding doors

The sliding doors can be adjusted using the Allen key on the upper guide roller.

11
Please do not hesitate to get in touch via e-mail
at [email protected].

Our sales assistants are more than happy to

Rödingsmarkt 20, 20459 Hamburg, Germany

12