0% found this document useful (0 votes)
78 views

Culvert Design Muz: Materials Geometry Loads Analysis Walls Slabs Drawing

This document provides details on the design of a culvert including geometry, materials, loads, and structural analysis. The culvert has 4 cells with interior and exterior walls and top and bottom slabs. Material strengths and unit weights are specified. Loads include wearing surface, fill, water, and equivalent traffic loads. Structural analysis determines bending moments, shear forces, and develops reinforcement details for the walls and slabs based on strength requirements.
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
78 views

Culvert Design Muz: Materials Geometry Loads Analysis Walls Slabs Drawing

This document provides details on the design of a culvert including geometry, materials, loads, and structural analysis. The culvert has 4 cells with interior and exterior walls and top and bottom slabs. Material strengths and unit weights are specified. Loads include wearing surface, fill, water, and equivalent traffic loads. Structural analysis determines bending moments, shear forces, and develops reinforcement details for the walls and slabs based on strength requirements.
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Title : Culvert Design MuZ

Units : SI kN,m

Materials :
Concrete :
Fc : 20.0 MPa
75

Fctd : 1.0 MPa


25 Ec : 28,000 MPa
15 γc : 25.0 kN/m3
15

Steel :
200 Fy : 500 MPa
Es : 2,00,000 MPa
250

60
25

25
Soil :
φ: 30.0 
γs : 20.0 kN/m3
25
110 Ka : 0.33

Wearing Surface :
γa : 22.0 kN/m3

Water :
γw : 10.0 kN/m3
Materials Geometry Loads Analysis

Walls Slabs Drawing Report


Sizes (cm)
Cells 1

Wearing Surface Heigth : 8.0

Vertical Depth (a) 75

(1) (2) (3) (4)


Cell Clear Width [1,2,3,4] 60.0 0.0 0.0 0.0

Exterior Wall thickness (5) 25.0

Interior Wall thickness (6) 15.0

Bottom Slab Height (7) 25.0

Top Slab Height (8) 25.0

Cell Clear Height (9) 200.0

Gusset Edge Length (10) 15.0


Equivalend Lane Load (kN/m) : 9.30

Top Slab Weight (1) : 6.76

Full Concrete Weight (1') : 36.25

Vertical Fill Load (2) : 15.00

Wearing Surface Load (3) : 1.76

Vertical Water Load (5) : -20.00

Horizontal Water Load, Top (7) : 0.00

Horizontal Water Load, Bottom (7) : 6.67

Horizontal Fill Load, Top (8) : 5.00

Horizontal Fill Load, Bottm (8) : 20.00

Lane Load Vertical Effect (4) : 5.17

Lane Load Horizontal Effect (6) : 1.72 Water Effect - 5 & 7 (Yes/No) : Yes
Midd/End Moments 4.5

-4.5
4.5
-4.5

-1.9 3
4.1 -4.1
1 4

2 1.9
5.3
-5.3

5.3
-5.3

Shear -12.8
Forces 12.8

-12.2
12.2

1 4
-16.2

16.2
19.2 -19.2
Force Details >>
4
Exterior Wall Parameters [1] [4]
Fcd Mpa : 20.0 Msupport kNm : 5.35 5.35
Fctd Mpa : 1.0 Mspan kNm : 4.13 4.13
Fyd Mpa : 500.0 Mu = max Mi : 5.35 5.35
H cm : 25.0 √1.2 Ms < D : OK OK
B cm : 100.0 J cm : 0.0016 0.0016
Cover cm : 5.0 Vd=1.15 Vmax : 22.08 19.20
D' cm : 20.0 Vd/3.5√Fc < D : OK OK
As.min cm2 : 4.0 Required As cm2 : 4.28 4.28
As.max cm2: 33.4 Select Bar mm : Ф12 Ф12
Vcr kN : 162.5 Select Spc. cm : 10 10
Selected As cm2 : 11.31 11.31
Bars Pattern : 10Ф12/10 10Ф12/10

Interior Wall Parameters []


Fcd Mpa : 20.0 Mtop kNm :
Fctd Mpa : 1.0 Mbot kNm :
Fyd Mpa : 500.0 Mu = max Mi :
H cm : 15.0 √1.2 Ms < D :
B cm : 100.0 J cm :
Cover cm : 5.0 Vd=1.15 Vmax :
D' cm : 10.0 Vd/3.5√Fc < D :
As.min cm2 : 2.4 Required As cm2 :
As.max cm2: 20.0 Select Bar mm : Ф20
Vcr kN : 97.5 Select Spc. cm : 10
Selected As cm2 :
Bars Pattern :

Slabs
Force Details
Members X1 Y1 M1 X2 Y2 M2 Midd_M Vi Vj Nij
1 -19.2 12.2 5.3 -12.8 -12.2 -4.5 4.1 19.2 -12.8 12.2
2 19.2 -16.2 -5.3 -19.2 -16.2 5.3 1.9 -16.2 16.2 19.2
3 12.8 12.2 4.5 -12.8 12.2 -4.5 -1.9 12.2 -12.2 12.8
4 19.2 12.2 -5.3 12.8 -12.2 4.5 -4.1 -19.2 12.8 12.2

Support Rx Ry Rm
1 #NAME? #NAME? #NAME?
3 #NAME? #NAME? #NAME?

2 4
3

1 4
#NAME?

#NAME?
#NAME? 2
1 3 << Return Analysis
Top Slab Parameters [2] [5] [8] [11]
Fcd Mpa : 20.0 Msupport kNm : 5.35 0.00 0.00 0.00
Fctd Mpa : 1.0 Mspan kNm : 1.90 0.00 0.00 0.00
Fyd Mpa : 500.0 Mu = max Mi : 5.35 0.00 0.00 0.00
H cm : 25.0 √1.2 Ms < D : OK OK OK OK
B cm : 100.0 J cm : 0.0016 0.0000 0.0000 0.0000
Cover cm : 5.0 Vd=1.15 Vmax : 16.23 0.00 0.00 0.00
D' cm : 20.0 Vd/3.5√Fc < D : OK OK OK OK
As.min cm2 : 4.0 Required As cm2 : 4.28 0.00 0.00 0.00
As.max cm2: 33.4 Select Bar mm : Ф12 Ф20 Ф20 Ф20
Vcr kN : 162.5 Select Spc. cm : 10 10 14 12
Selected As cm2 : 11.31 31.42 25.13 28.27
Bars Pattern : 10Ф12/10 10Ф20/10 8Ф20/14 9Ф20/12

Bottom Slab Parameters [3] [6] [9] [12]


Fcd Mpa : 20.0 Msupport kNm : 4.47 0.00 0.00 0.00
Fctd Mpa : 1.0 Mspan kNm : 1.88 0.00 0.00 0.00
Fyd Mpa : 500.0 Mu = max Mi : 4.47 0.00 0.00 0.00
H cm : 25.0 √1.2 Ms < D : OK OK OK OK
B cm : 100.0 J cm : 0.0013 0.0000 0.0000 0.0000
Cover cm : 5.0 Vd=1.15 Vmax : 14.02 0.00 0.00 0.00
D' cm : 20.0 Vd/3.5√Fc < D : OK OK OK OK
As.min cm2 : 4.0 Required As cm2 : 3.57 0.00 0.00 0.00
As.max cm2: 33.4 Select Bar mm : Ф12 Ф20 Ф20 Ф18
Vcr kN : 162.5 Select Spc. cm : 10 15 15 13
Selected As cm2 : 11.31 21.99 21.99 20.36
Bars Pattern : 10Ф12/10 7Ф20/15 7Ф20/15 8Ф18/13

Walls
-19.2041 12.1924 5.34727 -12.7959 -12.1924 -4.46626 4.12904 19.2041 -12.7959 12.1924
19.2041 -16.2251 -5.34727 -19.2041 -16.2251 5.34727 1.89944 -16.2251 16.2251 19.2041
12.7959 12.1924 4.46626 -12.7959 12.1924 -4.46626 -1.87538 12.1924 -12.1924 12.7959
19.2041 12.1924 -5.34727 12.7959 -12.1924 4.46626 -4.12904 -19.2041 12.7959 12.1924
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0

You might also like