Scribd
Upload
1K views

What Is Memory Hierarchy

The document discusses memory hierarchy in computers. It describes the five levels of memory hierarchy from fastest to slowest as registers, cache, main memory, magnetic disks, and magnetic tapes. The first three are volatile internal memory while the last two are non-volatile external memory. It then provides details on the characteristics, design, and advantages of memory hierarchy which separates memory into multiple levels to improve performance by storing frequently used data in faster memory closer to the CPU.

Uploaded by

O Level Study Adda
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views

What Is Memory Hierarchy

The document discusses memory hierarchy in computers. It describes the five levels of memory hierarchy from fastest to slowest as registers, cache, main memory, magnetic disks, and magnetic tapes. The first three are volatile internal memory while the last two are non-volatile external memory. It then provides details on the characteristics, design, and advantages of memory hierarchy which separates memory into multiple levels to improve performance by storing frequently used data in faster memory closer to the CPU.

Uploaded by

O Level Study Adda
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

What is Memory Hierarchy?

The memory in a computer can be divided into five hierarchies based on the
speed as well as use. The processor can move from one level to another based
on its requirements. The five hierarchies in the memory are registers, cache,
main memory, magnetic discs, and magnetic tapes. The first three hierarchies
are volatile memories which mean when there is no power, and then
automatically they lose their stored data. Whereas the last two hierarchies are
not volatile which means they store the data permanently.

A memory element is the set of storage devices which stores the binary data in
the type of bits. In general, the storage of memory can be classified into two
categories such as volatile as well as non- volatile.
Memory Hierarchy in Computer Architecture

The memory hierarchy design in a computer system mainly includes different


storage devices. Most of the computers were inbuilt with extra storage to run
more powerfully beyond the main memory capacity. The following memory
hierarchy diagram is a hierarchical pyramid for computer memory. The
designing of the memory hierarchy is divided into two types such as primary
(Internal) memory and secondary (External) memory.

Memory Hierarchy
Primary Memory
The primary memory is also known as internal memory, and this is accessible
by the processor straightly. This memory includes main, cache, as well as CPU
registers.

Secondary Memory
The secondary memory is also known as external memory, and this is accessible
by the processor through an input/output module. This memory includes an
optical disk, magnetic disk, and magnetic tape.

Characteristics of Memory Hierarchy

The memory hierarchy characteristics mainly include the following.

Performance
Previously, the designing of a computer system was done without memory
hierarchy, and the speed gap among the main memory as well as the CPU
registers enhances because of the huge disparity in access time, which will
cause the lower performance of the system. So, the enhancement was
mandatory. The enhancement of this was designed in the memory hierarchy
model due to the system’s performance increase.

Ability
The ability of the memory hierarchy is the total amount of data the memory can
store. Because whenever we shift from top to bottom inside the memory
hierarchy, then the capacity will increase.

Access Time
The access time in the memory hierarchy is the interval of the time among the
data availability as well as request to read or write. Because whenever we shift
from top to bottom inside the memory hierarchy, then the access time will
increase

Cost per bit


When we shift from bottom to top inside the memory hierarchy, then the cost
for each bit will increase which means an internal Memory is expensive
compared with external memory.

Memory Hierarchy Design

The memory hierarchy in computers mainly includes the following.

Registers
Usually, the register is a static RAM or SRAM in the processor of the computer
which is used for holding the data word which is typically 64 or 128 bits. The
program counter register is the most important as well as found in all the
processors. Most of the processors use a status word register as well as an
accumulator. A status word register is used for decision making, and the
accumulator is used to store the data like mathematical operation. Usually,
computers like complex instruction set computers have so many registers for
accepting main memory, and RISC- reduced instruction set computers have
more registers.
Cache Memory
Cache memory can also be found in the processor, however rarely it may be
another IC (integrated circuit) which is separated into levels. The cache holds
the chunk of data which are frequently used from main memory. When the
processor has a single core then it will have two (or) more cache levels rarely.
Present multi-core processors will be having three, 2-levels for each one core,
and one level is shared.
Main Memory
The main memory in the computer is nothing but, the memory unit in the CPU
that communicates directly. It is the main storage unit of the computer. This
memory is fast as well as large memory used for storing the data throughout the
operations of the computer. This memory is made up of RAM as well as ROM.

Magnetic Disks
The magnetic disks in the computer are circular plates fabricated of plastic
otherwise metal by magnetized material. Frequently, two faces of the disk are
utilized as well as many disks may be stacked on one spindle by read or write
heads obtainable on every plane. All the disks in computer turn jointly at high
speed. The tracks in the computer are nothing but bits which are stored within
the magnetized plane in spots next to concentric circles. These are usually
separated into sections which are named as sectors.

Magnetic Tape
This tape is a normal magnetic recording which is designed with a slender
magnetizable covering on an extended, plastic film of the thin strip. This is
mainly used to back up huge data. Whenever the computer requires to access a
strip, first it will mount to access the data. Once the data is allowed, then it will
be unmounted. The access time of memory will be slower within magnetic strip
as well as it will take a few minutes for accessing a strip.

Advantages of Memory Hierarchy

The need for a memory hierarchy includes the following.

 Memory distributing is simple and economical


 Removes external destruction
 Data can be spread all over
 Permits demand paging & pre-paging
 Swapping will be more proficient

You might also like